参数资料
型号: ADG1419BRMZ
厂商: Analog Devices Inc
文件页数: 6/16页
文件大小: 0K
描述: IC SWITCH 1 X SPDT 8MSOP
标准包装: 50
系列: iCMOS®
功能: 开关
电路: 1 x SPDT - NC/NO
导通状态电阻: 4.6 欧姆
电压电源: 单/双电源
电压 - 电源,单路/双路(±): 5 V ~ 16.5 V,±2.25 V ~ 8.25 V
电流 - 电源: 58µA
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP,8-MSOP(0.118",3.00mm 宽)
供应商设备封装: 8-MSOP
包装: 管件
产品目录页面: 802 (CN2011-ZH PDF)
ADG1419
Rev. 0 | Page 14 of 16
TERMINOLOGY
IDD
The positive supply current.
ISS
The negative supply current.
VD (VS)
The analog voltage on Terminal D and Terminal S.
RON
The ohmic resistance between Terminal D and Terminal S.
RFLAT (ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
ID, IS (On)
The channel leakage current with the switch on.
VINL
The maximum input voltage for Logic 0.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (Off)
The off switch source capacitance, measured with reference to
ground.
CD (Off)
The off switch drain capacitance, measured with reference to
ground.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
CIN
The digital input capacitance.
tON (EN)
Delay time between the 50% and 90% points of the digital input
and switch on condition. See Figure 27.
tOFF (EN)
Delay time between the 50% and 90% points of the digital input
and switch off condition. See Figure 27.
tTRANSITION
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from one
address state to another.
TBBM
Off time measured between the 80% point of both switches
when switching from one address state to another. See Figure 26.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching. See Figure 28.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance. See
Bandwidth
The frequency at which the output is attenuated by 3 dB. See
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch. See Figure 31.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental. See Figure 32.
AC Power Supply Rejection Ratio (ACPSRR)
ACPSRR measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is the
ACPSRR. See Figure 21.
相关PDF资料
PDF描述
ADG709CRUZ IC MULTIPLEXER DUAL 4X1 16TSSOP
ADG708CRUZ IC MULTIPLEXER 8X1 16TSSOP
ADG611YRUZ-REEL7 IC SWITCH QUAD SPST 16TSSOP
GRM2165C1H470GZ01D CAP CER 47PF 50V 2% NP0 0805
ADG1401BRMZ IC SWITCH SPST 1OHM RON 8MSOP
相关代理商/技术参数
参数描述
ADG1419BRMZ 制造商:Analog Devices 功能描述:IC ANALOG SWITCH SINGLE SPDT MSOP-8 制造商:Analog Devices 功能描述:IC, ANALOG SWITCH, SINGLE, SPDT, MSOP-8
ADG1419BRMZ-REEL7 功能描述:IC SWITCH 2.1OHM SPDT 8MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源,单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC(0.154",3.90mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
ADG1421 制造商:AD 制造商全称:Analog Devices 功能描述:2.1 Ω On Resistance, ±15 V/+12 V/±5 V iCMOS Dual SPST Switches
ADG1421BCPZ-REEL7 功能描述:IC SW SPST 2.1OHM RON 10LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源,单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC(0.154",3.90mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
ADG1421BRMZ 功能描述:IC SW SPST 2.1OHM RON 10MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 其它有关文件:STG4159 View All Specifications 标准包装:5,000 系列:- 功能:开关 电路:1 x SPDT 导通状态电阻:300 毫欧 电压电源:双电源 电压 - 电源,单路/双路(±):±1.65 V ~ 4.8 V 电流 - 电源:50nA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:7-WFBGA,FCBGA 供应商设备封装:7-覆晶 包装:带卷 (TR)