参数资料
型号: ADG1607BRUZ
厂商: Analog Devices Inc
文件页数: 13/24页
文件大小: 0K
描述: IC MULTIPLEXER 2X8 28TSSOP
标准包装: 50
系列: iCMOS®
功能: 多路复用器
电路: 2 x 8:1
导通状态电阻: 5 欧姆
电压电源: 单/双电源
电压 - 电源,单路/双路(±): 3.3 V ~ 16 V,±1.65 V ~ 4 V
电流 - 电源: 370µA
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 28-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 28-TSSOP
包装: 管件
产品目录页面: 802 (CN2011-ZH PDF)
ADG1606/ADG1607
Rev. 0 | Page 20 of 24
TERMINOLOGY
RON
Ohmic resistance between the D and S terminals.
ΔRON
Difference between the RON of any two channels.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured.
IS (Off)
Source leakage current when the switch is off.
ID (Off)
Drain leakage current when the switch is off.
ID, IS (On)
Channel leakage current when the switch is on.
VD, VS
Analog voltage on Terminal D and Terminal S.
CS (Off)
Channel input capacitance for the off condition.
CD (Off)
Channel output capacitance for the off condition.
CD, CS (On)
On switch capacitance.
CIN
Digital input capacitance.
tON (EN)
Delay time between the 50% and 90% points of the digital input
and the switch on condition.
tOFF (EN)
Delay time between the 50% and 90% points of the digital input
and the switch off condition.
tTRANSITION
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from one
address state to another.
tBBM
Off time measured between the 80% points of the switches
when switching from one address state to another.
VINL
Maximum input voltage for Logic 0.
VINH
Minimum input voltage for Logic 1.
IINL, IINH
Input current of the digital input.
IDD
Positive supply current.
ISS
Negative supply current.
Off Isolation
A measure of unwanted signal coupling through an off channel.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal
to the fundamental.
AC Power Supply Rejection Ratio (ACPSRR)
Measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modu-
lated by a sine wave of 0.62 V p-p. The ratio of the amplitude
of signal on the output to the amplitude of the modulation is
the ACPSRR.
相关PDF资料
PDF描述
ADG1608BRUZ-REEL7 IC MULTIPLEXER 8X1 16TSSOP
ADG1612BRUZ IC SWITCH QUAD SPST 16TSSOP
ADG1634BRUZ-REEL7 IC SW SPDT 4.5OHM RON 20TSSOP
ADG1636BRUZ IC SWITCH DUAL SPDT 16TSSOP
ADG201ASRZ-EP IC SWITCH QUAD SPST 16PLCC
相关代理商/技术参数
参数描述
ADG1607BRUZ 制造商:Analog Devices 功能描述:IC ANALOG MULTIPLEXER DUAL 8X1 TSSOP28 制造商:Analog Devices 功能描述:IC, ANALOG MULTIPLEXER, DUAL 8X1 TSSOP28
ADG1607BRUZ-REEL7 功能描述:IC MULTIPLEXER 2X8 28TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 其它有关文件:STG4159 View All Specifications 标准包装:5,000 系列:- 功能:开关 电路:1 x SPDT 导通状态电阻:300 毫欧 电压电源:双电源 电压 - 电源,单路/双路(±):±1.65 V ~ 4.8 V 电流 - 电源:50nA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:7-WFBGA,FCBGA 供应商设备封装:7-覆晶 包装:带卷 (TR)
ADG1608 制造商:AD 制造商全称:Analog Devices 功能描述:4.5 Ω RON, 4-/8-Channel ±5 V,+12 V, +5 V, and +3.3 V Multiplexers
ADG1608BCPZ-REEL7 功能描述:IC MULTIPLEXER 8X1 16LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:- 特色产品:MicroPak? 标准包装:1 系列:- 功能:开关 电路:2 x SPST - NC 导通状态电阻:500 毫欧 电压电源:单电源 电压 - 电源,单路/双路(±):1.4 V ~ 4.3 V 电流 - 电源:150nA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-XFDFN 供应商设备封装:8-XSON,SOT833-1 (1.95x1) 包装:Digi-Reel® 其它名称:568-5557-6
ADG1608BRUZ 功能描述:IC MULTIPLEXER 8X1 16TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:- 特色产品:MicroPak? 标准包装:1 系列:- 功能:开关 电路:2 x SPST - NC 导通状态电阻:500 毫欧 电压电源:单电源 电压 - 电源,单路/双路(±):1.4 V ~ 4.3 V 电流 - 电源:150nA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-XFDFN 供应商设备封装:8-XSON,SOT833-1 (1.95x1) 包装:Digi-Reel® 其它名称:568-5557-6