- 您现在的位置：买卖IC网 > PDF目录11359 > ADG729BRUZ (Analog Devices Inc)IC MUX/DEMUX DUAL 4X1 16TSSOP PDF资料下载
参数资料
| 型号： | ADG729BRUZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/13页 |
| 文件大小： | 0K |
| 描述： | IC MUX/DEMUX DUAL 4X1 16TSSOP |
| 产品培训模块： | Switch Fundamentals |
| 标准包装： | 96 |
| 功能： | 多路复用器/多路分解器 |
| 电路： | 2 x 4:1 |
| 导通状态电阻： | 4.5 欧姆 |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 2.7 V ~ 5.5 V |
| 电流 - 电源： | 10µA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
–6–
ADG728/ADG729
ABSOLUTE MAXIMUM RATINGS
1
(TA = 25
°C unless otherwise noted.)
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V
Analog, Digital Inputs
2
. . . . . . . . . . –0.3 V to VDD + 0.3 V or
30 mA, Whichever Occurs First
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
(Pulsed at 1 ms, 10% Duty Cycle max)
Continuous Current, Each S . . . . . . . . . . . . . . . . . . . . . 30 mA
Continuous Current D, ADG729 . . . . . . . . . . . . . . . . . 80 mA
Continuous Current D, ADG728 . . . . . . . . . . . . . . . . 120 mA
Operating Temperature Range
Industrial (B Version) . . . . . . . . . . . . . . . . –40
°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65
°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150
°C
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADG728/ADG729 features proprietary ESD protection circuitry, permanent damage
may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
TSSOP Package
θJA Thermal Impedance . . . . . . . . . . . . . . . . . . . 150.4°C/W
θ
JC Thermal Impedance . . . . . . . . . . . . . . . . . . . .
27.6
°C/W
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specication is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. Only one absolute
maximum rating may be applied at any one time.
2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be
limited to the maximum ratings given.
TERMINOLOGY
CD, CS (ON)
“ON” Switch Capacitance. Measured with refer-
ence to ground.
CIN
Digital Input Capacitance.
tON
Delay time between the 50% and 90% points
of the STOP condition and the switch “ON”
condition.
tOFF
Delay time between the 50% and 90% points
of the STOP condition and the switch “OFF”
condition.
tD
“OFF” time measured between the 80% points of
both switches when switching from one switch to
another.
Charge
A measure of the glitch impulse transferred from
Injection
the digital input to the analog output during
switching.
Off Isolation
A measure of unwanted signal coupling through
an “OFF” switch.
Crosstalk
A measure of unwanted signal which is coupled
through from one channel to another as a result
of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated
by 3 dBs.
On Response The frequency response of the “ON” switch.
Insertion
The loss due to the ON resistance of the switch.
Loss
WARNING!
ESD SENSITIVE DEVICE
VDD
Most Positive Power Supply Potential.
IDD
Positive Supply Current.
GND
Ground (0 V) Reference.
S
Source Terminal. May be an input or output.
D
Drain Terminal. May be an input or output.
VD (VS)
Analog Voltage on Terminals D, S.
RON
Ohmic Resistance between D and S.
RON
On Resistance Match Between any Two Chan-
nels, i.e., RONmax – RONmin.
RFLAT(ON)
Flatness is dened as the difference between the
maximum and minimum value of on resistance
as measured over the specied analog signal range.
IS (OFF)
Source Leakage Current with the Switch “OFF.”
ID (OFF)
Drain Leakage Current with the Switch “OFF.”
ID, IS (ON)
Channel Leakage Current with the Switch “ON.”
VINL
Maximum Input Voltage for Logic “0.”
VINH
Minimum Input Voltage for Logic “1.”
IINL (IINH)
Input Current of the Digital Input.
CS (OFF)
“OFF” Switch Source Capacitance. Measured
with reference to ground.
CD (OFF)
“OFF” Switch Drain Capacitance. Measured
with reference to ground.
REV. C
Lead Temperature, Soldering . . . . . As per JEDEC J-STD-020
相关PDF资料 |
PDF描述 |
|---|---|
| VI-JWT-IX-F4 | CONVERTER MOD DC/DC 6.5V 75W |
| VI-JWT-IX-F3 | CONVERTER MOD DC/DC 6.5V 75W |
| VI-JWT-IX-F1 | CONVERTER MOD DC/DC 6.5V 75W |
| ADG604YRUZ | IC MULTIPLEXER 4X1 14TSSOP |
| VI-JWR-IX-F3 | CONVERTER MOD DC/DC 7.5V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADG729BRUZ-REEL7 | 功能描述:IC MUX/DEMUX DUAL 4X1 16TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG731 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-/32- Channel, Serially Controlled 4 з 1.8 V to 5.5 V, 【2.5 V, Analog Multiplexers |
| ADG731BCP | 制造商:Analog Devices 功能描述:Analog Multiplexer Single 32:1 48-Pin LFCSP EP 制造商:Rochester Electronics LLC 功能描述:1.8V TO 5.5V, 32:1 MUX WITH SPI I/F I.C. - Bulk |
| ADG731BCP_REEL7 | 功能描述:1 Circuit IC Switch 32:1 5.5 Ohm 48-LFCSP (7x7) 制造商:analog devices inc. 系列:- 包装:带卷（TR） 零件状态:上次购买时间 开关电路:- 多路复用器/解复用器电路:32:1 电路数:1 导通电阻（最大值）:5.5 欧姆 通道至通道匹配（ΔRon）:- 电压 -?电源，单（V+）:1.8 V ~ 5.5 V 电压 - 电源，双（V±）:±2.5V 开关时间（Ton, Tof）（最大值）:- -3db 带宽:18MHz 电荷注入:1pC 沟道电容 （CS(off），CD（off））:13pF，260pF 电流 - 漏泄（IS（off））（最大值）:250pA 串扰:-72dB @ 1MHz 工作温度:-40°C ~ 80°C（TA） 封装/外壳:48-VFQFN 裸露焊盘，CSP 供应商器件封装:48-LFCSP（7x7） 标准包装:1 |
| ADG731BCP-REEL | 制造商:Analog Devices 功能描述:Analog Multiplexer Single 32:1 48-Pin LFCSP EP T/R 制造商:Analog Devices 功能描述:ANLG MUX SGL 32:1 5.5V 48LFCSP EP - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。