- 您现在的位置：买卖IC网 > PDF目录22039 > ADM1027ARQ-REEL (ON Semiconductor)IC REMOTE THERMAL CTRLR 24-QSOP PDF资料下载
参数资料
| 型号： | ADM1027ARQ-REEL |
| 厂商： | ON Semiconductor |
| 文件页数： | 24/56页 |
| 文件大小： | 1822K |
| 描述： | IC REMOTE THERMAL CTRLR 24-QSOP |
| 产品变化通告： | MFG CHG Notification ADI to ON Semi Product Discontinuation Notice 25/Aug/2008 |
| 标准包装： | 2,500 |
| 系列： | dBCool® |
| 功能： | 风扇控制，温度监控器 |
| 传感器类型： | 内部和外部 |
| 感应温度： | 0°C ~ 105°C，外部传感器 |
| 精确度： | ±1°C |
| 拓扑： | ADC，比较器，风扇速度计数器，多路复用器，寄存器库 |
| 输出类型： | SMBus? |
| 输出警报： | 无 |
| 输出风扇： | 是 |
| 电源电压： | 3 V ~ 5.5 V |
| 工作温度： | 0°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 24-QSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
REV. A
24
ADM1027
Fan Speed Measurement Registers
The fan tachometer readings are 16-bit values consisting of a
2-byte read from the ADM1027.
Reg. 0x28 TACH1 Low Byte = 0x00 default
Reg. 0x29 TACH1 High Byte = 0x00 default
Reg. 0x2A TACH2 Low Byte = 0x00 default
Reg. 0x2B TACH2 High Byte = 0x00 default
Reg. 0x2C TACH3 Low Byte = 0x00 default
Reg. 0x2D TACH3 High Byte = 0x00 default
Reg. 0x2E TACH4 Low Byte = 0x00 default
Reg. 0x2F TACH4 High Byte = 0x00 default
Reading Fan Speed From the ADM1027
If fan speeds are being measured, this involves a 2-register read
for each measurement. The low byte should be read first. This
causes the high byte to be frozen until both high and low byte
registers have been read from. This prevents erroneous TACH
readings.
The fan tachometer reading registers report back the number of
11.11 s period clocks (90 kHz oscillator) gated to the fan
speed counter, from the rising edge of the first fan TACH pulse
to the rising edge of the third fan TACH pulse (assuming two
pulses per revolution are being counted). Since the device is
essentially measuring the fan TACH period, the higher the
count value, the slower the fan is actually running. A 16-bit fan
tachometer reading of 0xFFFF indicates that the fan either has
stalled or is running very slowly (< 100 RPM).
HIGH LIMIT: > COMPARISON PERFORMED
Since actual fan TACH period is being measured, exceeding a
fan TACH limit by 1 will set the appropriate status bit and can
be used to generate an SMBALERT.
Fan Tach Limit Registers
The fan TACH limit registers are 16-bit values consisting of
two bytes.
Reg. 0x54 TACH1 Minimum Low Byte = 0xFF default
Reg. 0x55 TACH1 Minimum High Byte = 0xFF default
Reg. 0x56 TACH2 Minimum Low Byte = 0xFF default
Reg. 0x57 TACH2 Minimum High Byte = 0xFF default
Reg. 0x58 TACH3 Minimum Low Byte = 0xFF default
Reg. 0x59 TACH3 Minimum High Byte = 0xFF default
Reg. 0x5A TACH4 Minimum Low Byte = 0xFF default
Reg. 0x5B TACH4 Minimum High Byte = 0xFF default
Fan Speed Measurement Rate
The fan TACH readings are normally updated once every second.
The fast bit (Bit 3) of Configuration Register 3 (Reg. 0x78),
when set, updates the fan TACH readings every 250 ms.
If any of the fans are not being driven by a PWM channel but
are powered directly from 5 V or 12 V, their associated dc bit in
Configuration Register 3 should be set. This allows TACH
readings to be taken on a continuous basis for fans connected
directly to a dc source.
Calculating Fan Speed
Assuming a fan with 2 pulses/revolution (and 2 pulses/rev being
measured), fan speed is calculated by:
Fan Speed RPM
Fan Tach Reading
(
)
=
?/DIV>
(
)
90 000 60
,
where Fan Tach Reading = 16-bit fan tachometer reading.
Example:
TACH1 high byte (Reg. 0x29) = 0x17
TACH1 low byte (Reg. 0x28) = 0xFF
What is Fan 1 speed in RPM?
Fan 1 TACH reading = 0x17FF = 6143 decimal
RPM = (f ?60)/fan 1 TACH reading
RPM = (90000 ?60)/6143
Fan Speed = 879 RPM
FAN PULSES PER REVOLUTION
Different fan models can output either 1, 2, 3, or 4 TACH
pulses per revolution. Once the number of fan TACH pulses
has been determined, it can be programmed into the fan pulses
per revolution register (Reg. 0x7B) for each fan. Alternatively,
this register can be used to determine the number or pulses/
revolution output by a given fan. By plotting fan speed measure-
ments at 100% speed with different pulses/rev setting, the
smoothest graph with the lowest ripple determines the correct
pulses/rev value.
Fan Pulses Per Revolution Register
<1:0> FAN1 default = 2 pulses/rev
<3:2> FAN2 default = 2 pulses/rev
<5:4> FAN3 default = 2 pulses/rev
<7:6> FAN4 default = 2 pulses/rev
00 = 1 pulse/rev
01 = 2 pulses/rev
10 = 3 pulses/rev
11 = 4 pulses/rev
Rev. 3 | Page 24 of 56 | www.onsemi.com
相关PDF资料 |
PDF描述 |
|---|---|
| AGL030V2-QNG68 | IC FPGA IGLOO 1.2-1.5V 68QFN |
| AGL030V5-VQG100 | IC FPGA IGLOO 1.5V 100VQFP |
| AMC22DRTS-S93 | CONN EDGECARD 44POS DIP .100 SLD |
| F931C226KCC | CAP TANT 22UF 16V 10% 2312 |
| ADM1031ARQ-REEL | IC SENSOR 2-TEMP/FAN CTRL 16QSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM1027ARQ-REEL7 | 功能描述:IC REMOTE THERMAL CTRLR 24-QSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热管理 系列:dBCool® 标准包装:1 系列:- 功能:温度监控系统（传感器） 传感器类型:内部和外部 感应温度:-40°C ~ 125°C，外部传感器 精确度:±2.5°C 本地（最大值），±5°C 远程（最大值） 拓扑:ADC，比较器，寄存器库 输出类型:2 线 SMBus? 输出警报:无 输出风扇:无 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:Digi-Reel® 其它名称:296-22675-6 |
| ADM1027ARQSMSC | 功能描述:IC SENSOR TEMP/FAN CTRL 制造商:analog devices inc. 系列:* 零件状态:上次购买时间 标准包装:1 |
| ADM1027ARQZ | 功能描述:板上安装温度传感器 VOLT THRM MGMT CNTRLR IC RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADM1027ARQZ-REEL | 功能描述:板上安装温度传感器 VOLT THRM MGMT CNTRLR IC RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADM1027ARQZ-REEL7 | 功能描述:IC REMOTE THERMAL CTRLR 24QSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:dBCool® 标准包装:1 系列:- 功能:温度监控系统（传感器） 传感器类型:内部和外部 感应温度:-40°C ~ 125°C，外部传感器 精确度:±2.5°C 本地（最大值），±5°C 远程（最大值） 拓扑:ADC，比较器，寄存器库 输出类型:2 线 SMBus? 输出警报:无 输出风扇:无 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:Digi-Reel® 其它名称:296-22675-6 |
发布紧急采购，3分钟左右您将得到回复。