- 您现在的位置：买卖IC网 > PDF目录375260 > ADMC328YR (Analog Devices, Inc.) 28-Lead ROM-Based DSP Motor Controller with Current Sense PDF资料下载
参数资料
| 型号： | ADMC328YR |
| 厂商： | Analog Devices, Inc. |
| 英文描述： | 28-Lead ROM-Based DSP Motor Controller with Current Sense |
| 中文描述： | 28 - ROM的铅基于DSP的电机控制器的电流检测 |
| 文件页数： | 8/32页 |
| 文件大小： | 234K |
| 代理商： | ADMC328YR |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
ADMC328
–8–
REV. B
DSP CORE ARCHITECTURE OVERVIEW
Figure 3 is an overall block diagram of the DSP core of the
ADMC328, which is based on the fixed-point ADSP-2171. The
flexible architecture and comprehensive instruction set of the
ADSP-2171 allow the processor to perform multiple operations
in parallel. In one processor cycle (50 ns with a 10 MHz CLKIN)
the DSP core can:
Generate the next program address.
Fetch the next instruction.
Perform one or two data moves.
Update one or two data address pointers.
Perform a computational operation.
This all takes place while the processor continues to:
Receive and transmit through the serial port.
Decrement the interval timer.
Generate three-phase PWM waveforms for a power inverter.
Generate two signals using the 8-bit auxiliary PWM timers.
Acquire four analog signals.
Decrement the watchdog timer.
The processor contains three independent computational units:
the arithmetic and logic unit (ALU), the multiplier/accumulator
(MAC) and the shifter. The computational units process 16-bit
data directly and have provisions to support multiprecision com-
putations. The ALU performs a standard set of arithmetic and
logic operations as well as providing support for division primi-
tives. The MAC performs single-cycle multiply, multiply/add,
and multiply/subtract operations with 40 bits of accumulation.
The shifter performs logical and arithmetic shifts, normalization,
denormalization and derive-exponent operations. The shifter
can be used to efficiently implement numeric format control, in-
cluding floating-point representations.
The internal result (R) bus directly connects the computational
units so that the output of any unit may be the input of any unit
on the next cycle.
A powerful program sequencer and two dedicated data address
generators ensure efficient delivery of operands to these compu-
tational units. The sequencer supports conditional jumps and
subroutine calls and returns in a single cycle. With internal loop
counters and loop stacks, the ADMC328 executes looped code
with zero overhead; no explicit jump instructions are required to
maintain the loop.
Two data address generators (DAGs) provide addresses for
simultaneous dual operand fetches from data memory and pro-
gram memory. Each DAG maintains and updates four address
pointers (I registers). Whenever the pointer is used to access
data (indirect addressing), it is post-modified by the value in
one of four modify (M registers). A length value may be associ-
ated with each pointer (L registers) to implement automatic
modulo addressing for circular buffers. The circular buffering
feature is also used by the serial ports for automatic data trans-
fers to and from on-chip memory. DAG1 generates only data
memory address and provides an optional bit-reversal capability.
DAG2 may generate either program or data memory addresses
but has no bit-reversal capability.
Efficient data transfer is achieved with the use of five internal
buses:
Program memory address (PMA) bus.
Program memory data (PMD) bus.
Data memory address (DMA) bus.
Data memory data (DMD) bus.
Result (R) bus.
Program memory can store both instructions and data, permit-
ting the ADMC328 to fetch two operands in a single cycle—
one from program memory and one from data memory. The
ADMC328 can fetch an operand from on-chip program memory
and the next instruction in the same cycle.
The ADMC328 writes data from its 16-bit registers to the 24-bit
program memory using the PX register to provide the lower
eight bits. When it reads data (not instructions) from 24-bit pro-
gram memory to a 16-bit data register, the lower eight bits are
placed in the PX register.
The ADMC328 can respond to a number of distinct DSP core
and peripheral interrupts. The DSP interrupts comprise a serial
port receive interrupt, a serial port transmit interrupt, a timer
interrupt, and two software interrupts. Additionally, the motor
control peripherals include two PWM interrupts and a PIO in-
terrupt.
The serial port (SPORT1) provides a complete synchronous
serial interface with optional companding in hardware and a
wide variety of framed and unframed data transmit and receive
modes of operation. SPORT1 can generate an internal program-
mable serial clock or accept an external serial clock.
A programmable interval counter is also included in the DSP
core and can be used to generate periodic interrupts. A 16-bit
count register (TCOUNT) is decremented every
n
processor
cycles, where n–1 is a scaling value stored in the 8-bit TSCALE
register. When the value of the counter reaches zero, an interrupt
is generated, and the count register is reloaded from a 16-bit
period register (TPERIOD).
The ADMC328 instruction set provides flexible data moves
and multifunction (one or two data moves with a computation)
instructions. Each instruction is executed in a single 50 ns pro-
cessor cycle (for a 10 MHz CLKIN). The ADMC328 assembly
language uses an algebraic syntax for ease of coding and read-
ability. A comprehensive set of development tools supports
program development. For further information on the DSP
core, refer to the
ADSP-2100 Family User’s Manual,
Third Edition,
with particular reference to the ADSP-2171.
相关PDF资料 |
PDF描述 |
|---|---|
| ADMC328YR-XXX-YY | 30MM FLUSH BLACK PB SPRING RTRN |
| ADMC328TR-XXX-YY | 30MM FLUSH RED PB SPRING RTRN |
| ADMC328YN-XXX-YY | 30MM FLUSH CLEAR PB SPRING RTRN |
| ADMC328TN-XXX-YY | 30MM FLUSH YELLOW PUB SPRING RTRN |
| ADMC331 | ECONOLINE: REC3-S_DRW(Z)/H4,H6 - Safety standards and approval: EN 60950 certified, rated for 250VAV (LVD test report)- Applied for Ul 1950 Component Recognised Certification- 3W DIP Package- 4kVDC & 6kVDC Isolation- Regulated Output- Continuous Short Circiut Protection Auto-Restarting |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADMC328YR-XXX-YY | 制造商:AD 制造商全称:Analog Devices 功能描述:28-Lead ROM-Based DSP Motor Controller with Current Sense |
| ADMC328YRZGEP-27RL | 制造商:Analog Devices 功能描述: |
| ADMC330 | 制造商:AD 制造商全称:Analog Devices 功能描述:Single Chip DSP Motor Controller |
| ADMC330ADVEVALKIT | 制造商:AD 功能描述:330 ANALOG DEVICE S6H1X |
| ADMC330-ADVEVALKIT | 制造商:AD 功能描述:330 ANALOG DEVICE S6H1X |
发布紧急采购，3分钟左右您将得到回复。