参数资料
| 型号： | ADN2818ACPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 22/40页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK/DATA RECOVERY 32-LFCSP |
| 标准包装： | 1 |
| 类型： | 时钟和数据恢复（CDR），多路复用器 |
| PLL： | 是 |
| 主要目的： | SONET/SDH |
| 输入： | CML |
| 输出： | CML |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:2 |
| 差分 - 输入:输出： | 是/是 |
| 频率 - 最大： | 2.7GHz |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ（5x5） |
| 包装： | 托盘 |
| 产品目录页面： | 788 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页
Data Sheet
ADN2817/ADN2818
Rev. E | Page 29 of 40
CLK Holdover Mode
This mode of operation is available in LTD mode. In CLK
holdover mode, the output clock frequency remains within
±5% if the input data is removed or changed. To operate in
this mode, the user writes to the I2C to put the part into CLK
holdover mode by setting SEL_MODE[1] = 1. The user must
then initiate a frequency acquisition by writing a 1-to-0 transi-
tion into CTRLB[5], at which time the device locks onto the
input data rate. At this point, the output frequency remains
within ±5% of the initial acquired value regardless of whether
the input data is removed or the data rate changes.
It is important to note that all frequency acquisitions in this
mode must be initiated by writing a 1-to-0 transition into
CTRLB[5]. In this mode, the device does not automatically
initiate a new frequency acquisition when the input is momen-
tarily interrupted or if the input data rate changes.
CDR Bypass Mode
The CDR on the ADN2817/ADN2818 can be bypassed by setting
Bit CTRLD[7] = 1. In this mode, the ADN2817/ADN2818 feed
the input directly through the input amplifiers to the output
buffer, completely bypassing the CDR.
Disable Output Buffers
The ADN2817/ADN2818 provide the option of disabling the
output buffers for power savings. The clock output buffers
can be disabled by setting Bit CTRLD[5] = 1. This reduces
the total power consumption of the device by ~100 mW. For
an additional 100 mW power savings, such as in low power
standby mode, the data output buffers can also be disabled by
setting Bit CTRLD[6] = 1.
相关PDF资料 |
PDF描述 |
|---|---|
| XRT91L31IQ-F | IC TXRX SONET/SDH 8BIT 64QFP |
| MS27496E19A32S | CONN RCPT 32POS BOX MNT W/SCKT |
| AD9548BCPZ | IC CLOCK GEN/SYNCHRONIZR 88LFCSP |
| V375C36M150BL3 | CONVERTER MOD DC/DC 36V 150W |
| MAX3676EHJ+ | IC CLOCK RECOVERY 32-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADN2818ACPZ-RL | 制造商:AD 制造商全称:Analog Devices 功能描述:Continuous Rate 10 Mbps to 2.7 Gbps Clock and Data Recovery ICs |
| ADN2818ACPZ-RL7 | 功能描述:IC CLOCK/DATA RECOVERY 32-LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP （0.240"，6.10mm 宽） 供应商设备封装:64-TSSOP 包装:管件 |
| ADN2819 | 制造商:AD 制造商全称:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| ADN2819ACP-CML | 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP Tray 制造商:Rochester Electronics LLC 功能描述:MULTI-RATE 2.7GBPS CDR/ PA LOW POWER I.C - Bulk |
| ADN2819ACP-CML-RL | 制造商:Analog Devices 功能描述:CDR 2488.32Mbps/2666.06Mbps SONET/SDH 48-Pin LFCSP EP T/R |
发布紧急采购，3分钟左右您将得到回复。