参数资料
| 型号： | ADN2890ACP-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC AMP LIM 16LFCSP |
| 产品变化通告： | Product Discontinuance 27/July/2010 |
| 标准包装： | 1 |
| 放大器类型： | 限制 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| 电压 - 输入偏移： | 100µV |
| 电流 - 电源： | 39mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 16-LFCSP-VQ |
| 包装： | 剪切带 (CT) |
| 其它名称： | ADN2890ACP-RL7CT |
ADN2890
Data Sheet
Rev. A | Page 8 of 12
THEORY OF OPERATION
LIMAMP
Input Buffer
The limiting amplifier has differential inputs (PIN/NIN), with
an internal 50 termination. The ROSA (receive optical sub-
assembly) is typically ac-coupled to the ADN2890 inputs,
although dc coupling is possible.
An internal offset correction loop requires that a capacitor be
connected between the CAZ1 and CAZ2 pins. A 0.01 F
capacitor provides a low frequency cutoff of 2 kHz.
CML Output Buffer
The ADN2890 provides CML outputs, OUTP/OUTN. The
outputs are internally terminated with 50 to VCC.
The outputs can be kept at a static voltage by driving the
SQUELCH pin to a logic high. The SQUELCH pin can be
driven directly by the LOS pin, which automatically disables
the LIMAMP outputs in situations with no data input.
LOSS OF SIGNAL (LOS) DETECTOR
The receiver front-end LOS detector circuit indicates when the
input signal level has fallen below the user-adjustable threshold.
The threshold is set by a resistor connected between the
point down to <3.0 mV with >3 dB electrical hysteresis to
prevent chatter at the LOS output. The LOS output is an open-
collector output that must be pulled up externally with a 4.7 k
to 10 k resistor.
RECEIVED SIGNAL STRENGTH INDICATOR (RSSI)
The ADN2890 has an on-chip RSSI circuit that automatically
detects the average received power based on a direct measure-
ment of the PIN photodiode’s current. The photodiode bias is
supplied by the ADN2890, which allows a very accurate, on-
chip, average power measurement based on the amount of
current supplied to the photodiode. The output of the RSSI is a
current that is directly proportional to the average amount of
PIN photodiode current. Placing a resistor between the
RSSI_OUT pin and GND converts the current to a GND
referenced voltage. This function eliminates the need for
external RSSI circuitry in SFF-8472 compliant optical receivers.
SQUELCH MODE
Driving the SQUELCH input to a logic high disables the
limiting amplifier outputs. The SQUELCH input can be
connected to the LOS output to keep the limiting amplifier
outputs at a static voltage level anytime the input level to the
limiting amplifier drops below the programmed LOS threshold.
相关PDF资料 |
PDF描述 |
|---|---|
| ADN2891ACPZ-500RL7 | IC AMP LIM 16LFCSP |
| ADN2892ACPZ-500RL7 | IC AMP LIM 16LFCSP |
| ADR827BRMZ-REEL7 | IC OPAMP GP R-R 1MHZ LP 10MSOP |
| ADTL084ARZ-REEL7 | IC OPAMP JFET 5MHZ QUAD 14SOIC |
| AFB02512HHA | FAN DC AXIAL 12V 25X10 13000RPM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADN2890ACPZ-RL | 功能描述:IC AMP LIM 16LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:13 V/µs 增益带宽积:3MHz -3db带宽:- 电流 - 输入偏压:65pA 电压 - 输入偏移:3000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| ADN2890ACPZ-RL7 | 功能描述:IC AMP LIM 16LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:13 V/µs 增益带宽积:3MHz -3db带宽:- 电流 - 输入偏压:65pA 电压 - 输入偏移:3000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| ADN2890XCP | 制造商:Analog Devices 功能描述:- Trays |
| ADN2891 | 制造商:AD 制造商全称:Analog Devices 功能描述:3.3 V, 3.2 Gbps, Limiting Amplifier |
| ADN2891ACP | 制造商:AD 制造商全称:Analog Devices 功能描述:3.3 V, 3.2 Gbps, Limiting Amplifier |
发布紧急采购，3分钟左右您将得到回复。