- 您现在的位置：买卖IC网 > PDF目录19376 > ADSP-21065LCCAZ240 (Analog Devices Inc)IC DSP CTLR 32BIT 196CSPBGA PDF资料下载
参数资料
| 型号： | ADSP-21065LCCAZ240 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/44页 |
| 文件大小： | 0K |
| 描述： | IC DSP CTLR 32BIT 196CSPBGA |
| 产品培训模块： | SHARC Processor Overview |
| 标准包装： | 1 |
| 系列： | SHARC® |
| 类型： | 浮点 |
| 接口： | 主机接口，串行端口 |
| 时钟速率： | 60MHz |
| 非易失内存： | 外部 |
| 芯片上RAM： | 64kB |
| 电压 - 输入/输出： | 3.30V |
| 电压 - 核心： | 3.30V |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 196-BGA，CSPBGA |
| 供应商设备封装： | 196-CSPBGA（15x15） |
| 包装： | 托盘 |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页
REV. C
ADSP-21065L
–11–
The BTMS, BTCK,
BTRST and BTDI signals are provided so
that the test access port can also be used for board-level testing.
When the connector is not being used for emulation, place
jumpers between the Bxxx pins and the xxx pins. If you are not
going to use the test access port for board testing, tie
BTRST
to GND and tie or pull-up BTCK to VDD. The TRST pin must
be asserted after power-up (through
BTRST on the connector)
or held low for proper operation of the ADSP-2106x. None of
the Bxxx pins (Pins 5, 7, 9, 11) are connected on the EZ-ICE probe.
The JTAG signals are terminated on the EZ-ICE probe as follows:
Signal
Termination
TMS
Driven through 22
W resistor (16 mA driver)
TCK
Driven at 10 MHz through 22
W resistor
(16 mA driver)
TRST*
Driven through 22
W resistor (16 mA driver)
(pulled up by on-chip 20 k
W resistor)
TDI
Driven by 22
W resistor (16 mA driver)
TDO
One TTL load, Split Termination (160/220)
CLKIN
One TTL load, Split Termination (160/220).
(Caution: Do not connect to CLKIN if
internal XTAL oscillator is used.)
EMU
Active Low 4.7 k
W pull-up resistor, one TTL
load (open-drain output from ADSP-2106xs)
*TRST is driven low until the EZ-ICE probe is turned on by the emulator at
software start-up. After software start-up,
TRST is driven high.
Connecting CLKIN to Pin 4 of the EZ-ICE header is optional.
The emulator only uses CLKIN when directed to perform
operations such as starting, stopping, and single-stepping two
ADSP-21065Ls in a synchronous manner. If you do not need
these operations to occur synchronously on the two processors,
simply tie Pin 4 of the EZ-ICE header to ground.
For systems which use the internal clock generator and an external
discrete crystal, do not directly connect the CLKIN pin to the
JTAG probe. This will load the oscillator circuit and possibly
cause it to fail to oscillate. Instead the JTAG probe’s CLKIN
can be driven by the XTAL pin through a high impedance buffer.
If synchronous multiprocessor operations are needed and CLKIN
is connected, clock skew between multiple ADSP-2106x
processors and the CLKIN pin on the EZ-ICE header must be
minimal. If the skew is too large, synchronous operations may
be off by one cycle between processors. For synchronous multi-
processor operation TCK, TMS, CLKIN and
EMU should be
treated as critical signals in terms of skew, and should be laid
out as short as possible on your board.
If synchronous multiprocessor operations are not needed (i.e.,
CLKIN is not connected), just use appropriate parallel termina-
tion on TCK and TMS. TDI, TDO,
EMU and TRST are not
critical signals in terms of skew.
For complete information on the SHARC EZ-ICE, see the
ADSP-21000 Family
JTAG EZ-ICE User’s Guide and Reference.
相关PDF资料 |
PDF描述 |
|---|---|
| MC7805ACD2TR4 | IC REG LDO 5V 1A D2PAK-3 |
| TAJY108M002RNJ | CAP TANT 1000UF 2.5V 20% 2917 |
| ADSP-2101BG-100 | IC DSP CONTROLLER 16BIT 68PGA |
| VI-B2Z-CX-F4 | CONVERTER MOD DC/DC 2V 30W |
| DSEP30-06BR | DIODE 600V 30A ISOPLUS247 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADSP-21065LCS-240 | 制造商:Analog Devices 功能描述:DSP Floating-Point 32-Bit 60MHz 60MIPS 208-Pin MQFP 制造商:Analog Devices 功能描述:IC MICROCOMPUTER 32-BIT |
| ADSP-21065LCSZ-240 | 功能描述:IC DSP CONTROLLER 32BIT 208-MQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:40 系列:TMS320DM64x, DaVinci™ 类型:定点 接口:I²C，McASP，McBSP 时钟速率:400MHz 非易失内存:外部 芯片上RAM:160kB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:0°C ~ 90°C 安装类型:表面贴装 封装/外壳:548-BBGA，FCBGA 供应商设备封装:548-FCBGA（27x27） 包装:托盘 配用:TMDSDMK642-0E-ND - DEVELPER KIT W/NTSC CAMERA296-23038-ND - DSP STARTER KIT FOR TMS320C6416296-23059-ND - FLASHBURN PORTING KIT296-23058-ND - EVAL MODULE FOR DM642TMDSDMK642-ND - DEVELOPER KIT W/NTSC CAMERA |
| ADSP-21065LKCA-240 | 功能描述:IC DSP CTLR 32BIT 196CSPBGA RoHS:否 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21065LKCA-264 | 功能描述:IC DSP CTLR 32BIT 196CSPBGA RoHS:否 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21065LKCAZ240 | 功能描述:IC DSP CTLR 32BIT 196CSPBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:40 系列:TMS320DM64x, DaVinci™ 类型:定点 接口:I²C，McASP，McBSP 时钟速率:400MHz 非易失内存:外部 芯片上RAM:160kB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:0°C ~ 90°C 安装类型:表面贴装 封装/外壳:548-BBGA，FCBGA 供应商设备封装:548-FCBGA（27x27） 包装:托盘 配用:TMDSDMK642-0E-ND - DEVELPER KIT W/NTSC CAMERA296-23038-ND - DSP STARTER KIT FOR TMS320C6416296-23059-ND - FLASHBURN PORTING KIT296-23058-ND - EVAL MODULE FOR DM642TMDSDMK642-ND - DEVELOPER KIT W/NTSC CAMERA |
发布紧急采购，3分钟左右您将得到回复。