- 您现在的位置：买卖IC网 > PDF目录223311 > ADSP-21990BSTZ (ANALOG DEVICES INC) High-Performance Mixed-Signal DSP, 160 MHz, 4K Words Program Memory RAM; Package: LQFP 1.4 MM; No of Pins: 176; Temperature Range: Ind PDF资料下载
参数资料
| 型号： | ADSP-21990BSTZ |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 数字信号处理 |
| 英文描述： | High-Performance Mixed-Signal DSP, 160 MHz, 4K Words Program Memory RAM; Package: LQFP 1.4 MM; No of Pins: 176; Temperature Range: Ind |
| 中文描述： | 16-BIT, 160 MHz, OTHER DSP, PQFP176 |
| 封装： | ROHS COMPLIANT, MS-026BGA, LQFP-176 |
| 文件页数： | 3/50页 |
| 文件大小： | 2503K |
| 代理商： | ADSP-21990BSTZ |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页
ADSP-21990
Rev. A
|
Page 11 of 50
|
August 2007
peripheral interrupt controller is used to assign the various
peripheral interrupts to the 12 user assignable interrupts of the
DSP core.
There is no assigned priority for the peripheral interrupts after
reset. To assign the peripheral interrupts a different priority,
applications write the new priority to their corresponding con-
trol bits (determined by their ID) in the interrupt priority
control register.
Interrupt routines can either be nested with higher priority
interrupts taking precedence or processed sequentially. Inter-
rupts can be masked or unmasked with the IMASK register.
Individual interrupt requests are logically ANDed with the bits
in IMASK; the highest priority unmasked interrupt is then
selected. The emulation, power down, and reset interrupts are
nonmaskable with the IMASK register, but software can use the
DIS INT instruction to mask the power-down interrupt.
The interrupt control (ICNTL) register controls interrupt nest-
ing and enables or disables interrupts globally.
The IRPTL register is used to force and clear interrupts. On-
chip stacks preserve the processor status and are automatically
maintained during interrupt handling. To support interrupt,
loop, and subroutine nesting, the PC stack is 33 levels deep, the
loop stack is eight levels deep, and the status stack is 16 levels
deep. To prevent stack overflow, the PC stack can generate a
stack level interrupt if the PC stack falls below three locations
full or rises above 28 locations full.
The following instructions globally enable or disable interrupt
servicing, regardless of the state of IMASK:
Ena Int.
Dis Int.
At reset, interrupt servicing is disabled.
For quick servicing of interrupts, a secondary set of DAG and
computational registers exist. Switching between the primary
and secondary registers lets programs quickly service interrupts,
while preserving the state of the DSP.
PERIPHERAL INTERRUPT CONTROLLER
The peripheral interrupt controller is a dedicated peripheral
unit of the ADSP-21990 (accessed via I/O mapped registers).
The peripheral interrupt controller manages the connection of
up to 32 peripheral interrupt requests to the DSP core.
For each peripheral interrupt source, there is a unique 4-bit
code that allows the user to assign the particular peripheral
interrupt to any one of the 12 user assignable interrupts of the
embedded ADSP-2199x core. Therefore, the peripheral inter-
rupt controller of the ADSP-21990 contains eight, 16-bit
interrupt priority registers (Interrupt Priority Register 0 (IPR0)
to Interrupt Priority Register 7 (IPR7)).
Each interrupt priority register contains four 4-bit codes; one
specifically assigned to each peripheral interrupt. The user may
write a value between 0x0 and 0xB to each 4-bit location in
order to effectively connect the particular interrupt source to
the corresponding user assignable interrupt of the
ADSP-2199x core.
Writing a value of 0x0 connects the peripheral interrupt to the
USR0 user assignable interrupt of the ADSP-2199x core while
writing a value of 0xB connects the peripheral interrupt to the
USR11 user assignable interrupt. The core interrupt USR0 is the
highest priority user interrupt, while USR11 is the lowest prior-
ity. Writing a value between 0xC and 0xF effectively disables the
peripheral interrupt by not connecting it to any ADSP-2199x
core interrupt input. The user may assign more than one
peripheral interrupt to any given ADSP-2199x core interrupt. In
that case, the burden is on the user software in the interrupt vec-
tor table to determine the exact interrupt source through
reading status bits.
This scheme permits the user to assign the number of specific
interrupts that are unique to their application to the interrupt
scheme of the ADSP-2199x core. The user can then use the
existing interrupt priority control scheme to dynamically con-
trol the priorities of the 12 core interrupts.
Table 2. Interrupt Priorities/Addresses
Interrupt
IMASK/
IRPTL
Vector Address
Emulator (NMI)
—Highest Priority
NA
Reset (NMI)
0
0x00 0000
Power Down (NMI)
1
0x00 0020
Loop and PC Stack
2
0x00 0040
Emulation Kernel
3
0x00 0060
User Assigned Interrupt
(USR0)
4
0x00 0080
User Assigned Interrupt
(USR1)
50x00 00A0
User Assigned Interrupt
(USR2)
60x00 00C0
User Assigned Interrupt
(USR3)
70x00 00E0
User Assigned Interrupt
(USR4)
8
0x00 0100
User Assigned Interrupt
(USR5)
9
0x00 0120
User Assigned Interrupt
(USR6)
10
0x00 0140
User Assigned Interrupt
(USR7)
11
0x00 0160
User Assigned Interrupt
(USR8)
12
0x00 0180
User Assigned Interrupt
(USR9)
13
0x00 01A0
User Assigned Interrupt
(USR10)
14
0x00 01C0
User Assigned Interrupt
(USR11)
—Lowest Priority
15
0x00 01E0
相关PDF资料 |
PDF描述 |
|---|---|
| ADSP-BF542BBCZ-4A | 400 MHz Blackfin Embedded Processor: ADSP-BF542BBCZ-4A Temp Range: –40°C to +85°C Package: 400-Ball CSP_BGA BC-400-1 |
| ADSP-BF542BBCZ-5A | 533 MHz Blackfin Embedded Processor: ADSP-BF542BBCZ-5A Temp Range: –40°C to +85°C Package: 400-Ball CSP_BGA BC-400-1 |
| ADSP-BF542MBBCZ-5M | 533 MHz Blackfin Embedded Processor: ADSP-BF542MBBCZ-5M Temp Range: –40°C to +85°C Package: 400-Ball CSP_BGA BC-400-1 |
| ADSP-BF542KBCZ-6A | 600 MHz Blackfin Embedded Processor: ADSP-BF542KBCZ-6A Temp Range: 0°C to +70°C Package: 400-Ball CSP_BGA BC-400-1 |
| ADSP-BF544BBCZ-4A | 400 MHz Blackfin Embedded Processor: ADSP-BF544BBCZ-4A Temp Range: –40°C to +85°C Package: 400-Ball CSP_BGA BC-400-1 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADSP-21991BBC | 制造商:Analog Devices 功能描述:DSP Fixed-Point 16-Bit 150MHz 150MIPS 196-Pin Mini-BGA |
| ADSP-21991BBCZ | 功能描述:IC DSP CTLR 16BIT 196CSPBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:ADSP-21xx 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21991BST | 制造商:Analog Devices 功能描述:DSP Fixed-Point 16-Bit 160MHz 160MIPS 176-Pin LQFP 制造商:Rochester Electronics LLC 功能描述:HIGH PERFORMANCE MIXED SIGNAL DSP - Bulk |
| ADSP-21991BSTZ | 功能描述:IC DSP CONTROLLER 16BIT 176-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:ADSP-21xx 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21992BBC | 制造商:Analog Devices 功能描述:DSP Fixed-Point 16-Bit 150MHz 150MIPS 196-Pin CSP-BGA 制造商:Rochester Electronics LLC 功能描述:MIXED SIGNAL DSP W/32K DM RAM& 16K PMRAM - Bulk |
发布紧急采购，3分钟左右您将得到回复。