- 您现在的位置：买卖IC网 > PDF目录67358 > ADT7476ARQZ-REEL7 (ANALOG DEVICES INC) DIGITAL TEMP SENSOR-SERIAL, 10BIT(s), 2.50Cel, RECTANGULAR, SURFACE MOUNT PDF资料下载
参数资料
| 型号： | ADT7476ARQZ-REEL7 |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 温度/湿度传感器 |
| 英文描述： | DIGITAL TEMP SENSOR-SERIAL, 10BIT(s), 2.50Cel, RECTANGULAR, SURFACE MOUNT |
| 封装： | ROHS COMPLIANT, MO-137AE, QSOP-24 |
| 文件页数： | 48/72页 |
| 文件大小： | 5219K |
| 代理商： | ADT7476ARQZ-REEL7 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页当前第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页
ADT7476
Rev. B | Page 52 of 72
How Fan Presence Detect Works
Typically, 4-wire fans have an internal pull-up to 4.75 V ± 10%,
which typically sources 5 mA. While the detection cycle is on,
an internal current sink is turned on, sinking current from the
fan’s internal pull-up. By driving some of the current from the
fan’s internal pull-up (~100 μA), the logic buffer switches to a
defined logic state. If this state is high, a fan is present; if the
state is low, no fan is present.
Note that the PWM input voltage should be clamped to 3.3 V.
This ensures that the PWM output is not pulled to a voltage
higher than the maximum allowable voltage on that pin (3.6 V).
FAN SYNC
When two ADT7476s are used in a system, it is possible to
synchronize them so that one PWM channel from each device
can be effectively OR’ed together to create a PWM output that
reflects the maximum speed of the two OR’ed PWMs. This
OR’ed PWM can in turn be used to drive a chassis fan. See the
Analog Devices website, located at www.analog.com, for
information about the Fan sync function.
STANDBY MODE
The ADT7476 is specifically designed to respond to the STBY
supply. In computers that support S3 and S5 states, the core
voltage of the processor is lowered in these states. When
monitoring THERM, the THERM timer should be disabled
during these states.
When the VCCP voltage drops below the VCCP low limit, the
following occurs:
1.
Status Bit 1 (VCCP) in Status Register 1 is set.
2.
SMBALERT is generated, if enabled.
3.
THERM monitoring is disabled. The THERM timer
should hold its value prior to the S3 or S5 state.
Once the core voltage, VCCP, goes above the VCCP low limit,
everything is re-enabled and the system resumes normal
operation.
XNOR TREE TEST MODE
The ADT7476 includes an XNOR tree test mode. This mode is
useful for in-circuit test equipment at board-level testing. By
applying stimulus to the pins included in the XNOR tree, it is
possible to detect opens, or shorts, on the system board.
The XNOR tree test is invoked by setting Bit 0 (XEN) of the
XNOR tree test enable register (0x6F).
Figure 66 shows the signals that are exercised in the XNOR tree
test mode.
PWM1/XTO
PWM3
PWM2
TACH4
TACH3
TACH2
TACH1
VID4
VID3
VID2
VID1
VID0
05382-067
Figure 66. XNOR Tree Test
POWER-ON DEFAULT
When the ADT7476 is powered up, monitoring is off by default
and the PWM outputs go to 100%. All necessary registers then
need to be configured via the SMBus for the appropriate
functions to operate.
相关PDF资料 |
PDF描述 |
|---|---|
| ADT7482ARMZ-RL | DIGITAL TEMP SENSOR-SERIAL, 11BIT(s), 2.5Cel, SQUARE, SURFACE MOUNT |
| ADT7482ARMZ-U2 | DIGITAL TEMP SENSOR-SERIAL, 11BIT(s), 2.5Cel, SQUARE, SURFACE MOUNT |
| ADT7485ARMZ-REEL | DIGITAL TEMP SENSOR-SERIAL, 16BIT(s), 1Cel, SQUARE, SURFACE MOUNT |
| ADT7485ARMZ | DIGITAL TEMP SENSOR-SERIAL, 16BIT(s), 1Cel, SQUARE, SURFACE MOUNT |
| ADT7485ARMZ-REEL7 | DIGITAL TEMP SENSOR-SERIAL, 16BIT(s), 1Cel, SQUARE, SURFACE MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADT7476EBZEVB | 功能描述:BOARD EVALUATION FOR ADT7476 RoHS:是 类别:编程器，开发系统 >> 过时/停产零件编号 系列:dBCool® 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
| ADT7481 | 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Channel Temperature Sensor and Over Temperature Alarm |
| ADT7481ARMZ | 功能描述:板上安装温度传感器 2 CH TEMP SNSR/ALARM 2 WIRE SMBUS INTRFCE RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADT7481ARMZ-001 | 功能描述:板上安装温度传感器 2 CH TEMP SNSR/ALARM 2 WIRE SMBUS INTRFCE RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADT7481ARMZ-1 | 功能描述:IC SENSOR TEMP 2CH ALARM 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:- 标准包装:1 系列:- 功能:温度监控系统（传感器） 传感器类型:内部和外部 感应温度:-40°C ~ 125°C，外部传感器 精确度:±2.5°C 本地（最大值），±5°C 远程（最大值） 拓扑:ADC，比较器，寄存器库 输出类型:2 线 SMBus? 输出警报:无 输出风扇:无 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:Digi-Reel® 其它名称:296-22675-6 |
发布紧急采购，3分钟左右您将得到回复。