参数资料
型号: AFCT-5745TPZ
元件分类: 光收发
英文描述: FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2700Mbps(Tx), 2700Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
封装: ROHS COMPLIANT, PLASTIC, DIP-20
文件页数: 9/18页
文件大小: 524K
代理商: AFCT-5745TPZ
17
Application Information
The Applications Engineering Group at Avago is available
to assist you with technical understanding and design
trade-offs associated with these transceivers. You can
contact them through your Avago sales representative.
The following information is provided to answer some of
the most common questions about the use of parts.
Optical Power Budget
The worst-case Optical Power Budget (OPB) in dB for a
fiber-optic link is determined by the difference between
the minimum transmitter output optical power (dBm
avg) and the lowest receiversensitivity (dBm avg). This
OPB provides the necessary optical signal range to es-
tablish a working fiber-optic link. The OPB is allocated
for the fiber-optic cable length and the corresponding
link penalties. For proper link performance, all penalties
that affect the link performance must be accounted for
within the link optical power budget.
Process Plug
This transceiver is supplied with a process plug for pro-
tection of the optical port within the LC connector recep-
tacle. This process plug prevents contamination during
standard process handling, shipping and storage.
LC SFP Cleaning Recommendations
In the event of contamination of the optical ports, the
recommended cleaning process is the use of forced nitro-
gen. If contamination is thought to have remained, the
optical ports can be cleaned using a NTT international
Cletop stick type (diam. 1.25 mm) and HFE7100 cleaning
fluid.
Customer Manufacturing Processes
This module is pluggable and is not designed for aque-
ous wash, IR reflow or wave soldering processes.
Caution
There are no user serviceable parts nor any maintenance
required for the AFCT-5745Z. Tampering with or modi-
fying the performance of the AFCT-5745Z will result in
voided product warranty. It may also result in improper
operation of the AFCT-5745Z circuitry, and possible over-
stress of the laser source. Device degradation or product
failure may result. Connection of the AFCT-5745Z to a
non-approved optical source, operating above the rec-
ommended absolute maximum conditions or operating
the AFCT-5745Z in a manner inconsistent with its design
and function may result in hazardous radiation exposure
and may be considered an act of modifying or manufac-
turing a laser product. The person(s) performing such an
act are required by law to re-certify and re-identify the
laser product under the provisions of U.S. 21 CFR (Sub-
chapter J) and the TUV.
相关PDF资料
PDF描述
AFF-1E50AB100 FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT
AFF-1E50AB103 FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, FC/APC CONNECTOR
AFF-1E50AB105 FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, SC/APC CONNECTOR
AFF-1E50AB109 FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, FC/UPC CONNECTOR
AFF-1E50AB10A FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, SC/UPC CONNECTOR
相关代理商/技术参数
参数描述
AFCT-5750ALZ 功能描述:光纤发射器、接收器、收发器 Transceiver RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装:
AFCT-5750APZ 功能描述:光纤发射器、接收器、收发器 Transceiver RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装:
AFCT-5750ATLZ 功能描述:光纤发射器、接收器、收发器 Transceiver RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装:
AFCT-5750ATPZ 功能描述:光纤发射器、接收器、收发器 Transceiver RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装:
AFCT-5750LZ 功能描述:光纤发射器、接收器、收发器 Transceiver RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: