- 您现在的位置：买卖IC网 > PDF目录201300 > AK1001-9RD5B1 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | AK1001-9RD5B1 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE K02, MODULE |
| 文件页数： | 16/31页 |
| 文件大小： | 637K |
| 代理商： | AK1001-9RD5B1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
Cassette Style
150 Watt DC-DC Converters
K Series
Edition 01/01.2000
23/31
Due to high current values, all AK...FK units provide two in-
ternally parallel connected contacts for certain paths (pins
4/6, 8/10, 26/28 and 30/32 respectively). It is recommended
to connect load and supply to both female connector pins of
each path in order to keep the voltage drop across the con-
nector pins to an absolute minimum and to not overstress
the connector contacts if currents are higher than approx. 8
A. The connector contacts are rated 8 A over the whole
temperature range.
Make sure that there is sufficient air flow possible for con-
vection cooling. This should be verified by measuring the
case temperature when the unit is installed and operated in
the end-use application. The maximum specified case tem-
perature
TC max shall not be exceeded. See also Thermal
Considerations.
If the end-product is to be UL certified, the temperature of
the main isolation transformer should be evaluated as part
of the end-product investigation.
Check for hazardous voltages before altering any connec-
tions.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also:
Safety
of operator accessible output circuit.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids is to be prevented, since the power supplies
are not hermetically sealed.
Isolation
The electric strength test is performed as factory test in ac-
cordance with IEC/EN 60950 and UL 1950 and should not
be repeated in the field. Power-One will not honour any
guarantee claims resulting from electric strength field tests.
Table 13: Isolation
Characteristic
Input to
Output to
Unit
case
output
case
output
Electric
Required according to
AK, BK
1.0
2.0 1
0.5
-
kVrms
strength
IEC/EN 60950
1.4
2.8 1
0.7
-
kV DC
test voltage
CK, DK
1.5
3.0 1
0.5
-
kVrms
EK, FK
2.1
4.2 1
0.7
-
kV DC
Actual factory test 1 s
AK, BK
2.8
5.6 1
1.4
0.14
AC test voltage equivalent
CK, DK
2.0
4.0 1
1.0
0.1
kVrms
to actual factory test
EK, FK
Insulation resistance at 500 V DC
>300
>100 2
M
1 In accordance with IEC/EN 60950 only subassemblies are tested in factory with this voltage.
2 Tested at 150 V DC.
For creepage distances and clearances refer to:
Technical
Information: Safety.
Standards and approvals
All DC-DC converters correspond to class I equipment.
They are UL recognized according to UL 1950, UL recog-
nized for Canada to CAN/CSA C22.2 No. 950-95 and LGA
approved to IEC/EN 60950 standards.
The units have been evaluated for:
Building in,
Basic insulation between input and case and double or
reinforced insulation between input and output, based
on 150 V AC/DC (AK and BK) or 250 V AC and 400 V DC
(CK, DK, EK, FK),
The use in a pollution degree 2 environment,
Connecting the input to a primary or secondary circuit
which is subject to a maximum transient rating of
2500 V.
The DC-DC converters are subject to manufacturing sur-
veillance in accordance with the above mentioned UL,
CSA, EN and with ISO 9001 standards.Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids is to be prevented, since the power supplies
are not hermetically sealed.
Protection Degree
Condition: Female connector fitted to the unit.
IP 30: All units except those with option P, and except
those with option D or V with potentiometer.
IP 20: All units fitted with option P, or with option D or V with
potentiometer.
相关PDF资料 |
PDF描述 |
|---|---|
| AK1001-9RD9B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1301-7RD0B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1301-9RD0TB1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1501-9PD1TB2 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1501-9PDDB2 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AK100-25 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Attenuator |
| AK10-030C | 制造商:Littelfuse 功能描述:TVS AXIAL KA RATED 10KA 30V BI 制造商:Littelfuse 功能描述:TVS Diodes - Transient Voltage Suppressors 30V 10KA TVS BI Axial KA Rated 制造商:Littelfuse 功能描述:DIODE, TVS, 30V, BIDIRECTIONAL, AXIAL LEADED; TVS Polarity:Bidirectional; Reverse Stand-Off Voltage Vrwm:30V; Breakdown Voltage Min:32V; Breakdown Voltage Max:37V; Clamping Voltage Vc Max:58V; Peak Pulse Current Ippm:10kA ;RoHS Compliant: Yes |
| AK10-030C-12 | 功能描述:TVS DIODE 30VWM 58VC AXIAL 制造商:littelfuse inc. 系列:AK10 包装:散装 零件状态:有效 类型:齐纳 单向通道:- 双向通道:1 电压 - 反向关态（典型值）:30V 电压 - 击穿（最小值）:32V 电压 - 箝位（最大值）@ Ipp:58V 电流 - 峰值脉冲（10/1000μs）:10000A（10kA）（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:无 应用:通用 不同频率时的电容:11nF @ 10kHz 工作温度:-55°C ~ 150°C（TJ） 安装类型:通孔 封装/外壳:轴向，直角弯曲（24.15mm 中心） 供应商器件封装:轴向 标准包装:12 |
| AK10-058C | 功能描述:TVS 二极管 - 瞬态电压抑制器 10kA 58V RoHS:否 制造商:Vishay Semiconductors 极性:Bidirectional 工作电压: 击穿电压:58.9 V 钳位电压:77.4 V 峰值浪涌电流:38.8 A 系列: 封装 / 箱体:DO-214AB 最小工作温度:- 55 C 最大工作温度:+ 150 C |
| AK10-058C-12 | 功能描述:TVS DIODE 58VWM 110VC AXIAL 制造商:littelfuse inc. 系列:AK10 包装:散装 零件状态:有效 类型:齐纳 单向通道:- 双向通道:1 电压 - 反向关态（典型值）:58V 电压 - 击穿（最小值）:64V 电压 - 箝位（最大值）@ Ipp:110V 电流 - 峰值脉冲（10/1000μs）:10000A（10kA）（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:无 应用:通用 不同频率时的电容:6.5nF @ 10kHz 工作温度:-55°C ~ 150°C（TJ） 安装类型:通孔 封装/外壳:轴向，直角弯曲（24.15mm 中心） 供应商器件封装:轴向 标准包装:12 |
发布紧急采购，3分钟左右您将得到回复。