参数资料
| 型号： | AP6503SP-13 |
| 厂商： | Diodes Inc |
| 文件页数： | 10/15页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 3A 8SO |
| 标准包装： | 1 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.925 V ~ 20 V |
| 输入电压： | 4.75 V ~ 23 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 340kHz |
| 电流 - 输出： | 3A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm Width）裸露焊盘 |
| 包装： | 标准包装 |
| 供应商设备封装： | 8-SO 裸露焊盘 |
| 其它名称： | AP6503SP-13DIDKR |
AP6503
Application Information (cont.)
Compensation Components (cont.)
The control loop transfer function incorporates two poles one is due to the compensation capacitor (C3) and the output resistor of error amplifier,
and the other is due to the output capacitor and the load resistor. These poles are located at:
f P1 =
f P2 =
G EA
2 π × C 3 × A VEA
1
2 π × C 2 × R LOAD
Where G EA is the error amplifier trans-conductance.
One zero is present due to the compensation capacitor (C3) and the compensation resistor (R3). This zero is located at:
f Z1 =
1
2 π × C 3 × R 3
The goal of compensation design is to shape the converter transfer function to get a desired loop gain. The system crossover frequency where
the feedback loop has the unity gain is crucial.
A rule of thumb is to set the crossover frequency to below one-tenth of the switching frequency. Use the following procedure to optimize the
compensation components:
1. Choose the compensation resistor (R3) to set the desired crossover frequency. Determine the R3 value by the following equation:
EA × G CS
R 3 =
2 π × C 2 × fc
G EA × G CS
×
VOUT
V FB
<
2 π × C 2 × 0 . 1 × fs
G
×
VOUT
V FB
Where f C is the crossover frequency, which is typically less than one tenth of the switching frequency.
2. Choose the compensation capacitor (C3) to achieve the desired phase margin set the compensation zero, f Z1 , to below one forth of the
crossover frequency to provide sufficient phase margin. Determine the C3 value by the following equation:
Where R3 is the compensation resistor value.
C 3 >
2
π × R 3 × fc
V OUT
(V)
1.2
1.8
2.5
3.3
5
12
C IN /C1
(μF)
22
22
22
22
22
22
C OUT /C2
(μF)
47
47
47
47
47
47
R C /R3
(k ? )
3.24
6.8
6.8
6.8
6.8
6.8
C C /C3
(nF)
6.8
6.8
6.8
6.8
6.8
6.8
L1
(μH)
3.3
3.3
10
10
10
15
Table 2 – Recommended Component Selection
AP6503
Document number: DS35077 Rev. 5 - 2
10 of 15
January 2013
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| AP6714M10G-13 | IC REG BOOST SYNC ADJ 10MSOP |
| AP7115-35WG-7 | IC REG LDO 3.5V .15A SOT-25 |
| AP7165-SPG-13 | IC REG LDO ADJ .6A 8-SOIC |
| AP7167-FNG-7 | IC REG LDO ADJ 1.2A 10-DFN |
| AP7168-SPG-13 | IC REG LDO ADJ 1.2A 8SOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP6507 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:500 kHz 18V 3A SYNCHRONOUS DC/DC BUCK CONVERTER |
| AP6507SP-13 | 功能描述:直流/直流开关转换器 SWITCHING REG CONV POWER SUPPLY RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| AP6508 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:500kHz 21V 3A SYNCHRONOUS DC/DC BUCK CONVERTER |
| AP6508FE | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:500kHz 21V 3A SYNCHRONOUS DC/DC BUCK CONVERTER |
| AP6508FE-13 | 制造商:Diodes Incorporated 功能描述:SWITCHING REGULATOR CONVERTER BUCK CONVERTER SYNCHRONOUS DF - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。