- 您现在的位置：买卖IC网 > Datasheet目录203 > APS1250 (Tripp Lite)INVERTER W/BATT CHARGE 1250W Datasheet资料下载
参数资料
| 型号： | APS1250 |
| 厂商： | Tripp Lite |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | INVERTER W/BATT CHARGE 1250W |
| 标准包装： | 1 |
| 系列： | PowerVerter® |
| 类型： | 反相器，UPS |
| 输出电压： | 120VAC |
| 输入电压： | 12VDC，120VAC |
| AC 电源插座： | 2 |
| 连接器 - AC 输出： | NEMA 5-15R |
| 连接器 - 电压输入： | 端子，电源软线（NEMA 5-15P） |
| 电源 - 连续输出： | 1250W |
| 电源 - 输出电涌： | 2500W |
| 遥控能力： | 是 |
| 局部使用： | 适用于北美地区 |
| 尺寸： | 9.00" L x 8.75" W x 7.00" H（228.6mm x 222.3mm x 177.8mm） |
| 特点： | 用于UPS 模式的自动功率传输，电池充电器 |
| 重量： | 23 磅（10.4kg） |
| 其它名称： | TL104 |
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment
compatible with a one cycle transfer time
1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode
Double Boost? inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower? inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions (For best
results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under
load and allow inverter/charger to fully cool before and after OverPower usage).
3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Two built-in NEMA 5-15R output receptacles pass 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings.
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and
selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Resettable 8A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes
user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged.
Specifications
OVERVIEW
Intended Application
OUTPUT
Frequency compatibility
Output watts
Continuous output capacity (watts)
Peak output capacity (watts)
Output nominal voltage
Output voltage regulation
Output frequency regulation
Overload protection
Outlet quantity / type
Emergency Home Power
60 Hz
1250
1250
2500
120V
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
60 Hz (+/- 0.3 Hz)
Includes 8A input breaker dedicated to the charging system and 12A output breaker for AC output loads
2 NEMA 5-15R
2 / 5
相关PDF资料 |
PDF描述 |
|---|---|
| APS1524 | INVERTER 1500W HARDWIRE OUTPUT |
| APS2424 | INVERTR 2400W 24VDC W/CHRGR |
| APS2448UL | INVERTER 2400W 48VDC OR 120VAC |
| APS3636VR | INVERTER 3600W 36VDC OR 120VAC |
| APS512 | INVERTER 500W 12VDC 2OUT W/CHRGR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| APS12625LLHALT-AAP | 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000 |
| APS12625LLHALT-BAP | 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000 |
| APS12625LLHALX-AAP | 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:10,000 |
| APS12625LLHALX-BAP | 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:10,000 |
| APS12626LLHALT-AAP | 功能描述:2D HALL EFFECT QUADRATURE DUAL L 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000 |
发布紧急采购，3分钟左右您将得到回复。