参数资料
型号: APS1250
厂商: Tripp Lite
文件页数: 3/5页
文件大小: 0K
描述: INVERTER W/BATT CHARGE 1250W
标准包装: 1
系列: PowerVerter®
类型: 反相器,UPS
输出电压: 120VAC
输入电压: 12VDC,120VAC
AC 电源插座: 2
连接器 - AC 输出: NEMA 5-15R
连接器 - 电压输入: 端子,电源软线(NEMA 5-15P)
电源 - 连续输出: 1250W
电源 - 输出电涌: 2500W
遥控能力:
局部使用: 适用于北美地区
尺寸: 9.00" L x 8.75" W x 7.00" H(228.6mm x 222.3mm x 177.8mm)
特点: 用于UPS 模式的自动功率传输,电池充电器
重量: 23 磅(10.4kg)
其它名称: TL104
INPUT
Nominal Input Voltage(s) Supported
Recommended Electrical Service
Maximum input amps / watts
Input connection type
Voltage compatibility (VAC)
Voltage compatibility (VDC)
BATTERY
Expandable battery runtime
DC system voltage (VDC)
Battery Pack Accessory (optional)
Battery charge
UPC ASSIGNMENT
Unit Carton UPC#
120V AC
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC
INPUT: 120VAC
DC INPUT: Full continuous load - 127A at 12V DC. AC INPUT: 12 amps at 120VAC with full inverter and charger
load (6.3A max charger-only)
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
120
12
Runtime is expandable with any number of user supplied wet, gel or SLA batteries
12
98-121 sealed lead acid battery (optional)
30A max, 3 step, float for long term maintenance
037332090126
LEDS ALARMS & SWITCHES
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
Switches
Front panel LEDs
SURGE / NOISE SUPPRESSION
AC suppression joule rating
PHYSICAL
Shipping Dimensions (HWD/in)
Shipping Dimensions (HWD/cm)
Shipping weight (lbs)
Shipping weight (kg)
Unit Dimensions (HWD/in)
Unit Dimensions (HWD/cm)
Unit weight (lbs)
on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in
inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to
battery power - to maintain continuous AC power to connected loads.
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
450
12.5 x 11 x 10.75
31.75 x 27.94 x 27.31
24.8
11.3
7 x 8.75 x 9
17.78 x 22.23 x 22.86
23.2
3 / 5
相关PDF资料
PDF描述
APS1524 INVERTER 1500W HARDWIRE OUTPUT
APS2424 INVERTR 2400W 24VDC W/CHRGR
APS2448UL INVERTER 2400W 48VDC OR 120VAC
APS3636VR INVERTER 3600W 36VDC OR 120VAC
APS512 INVERTER 500W 12VDC 2OUT W/CHRGR
相关代理商/技术参数
参数描述
APS12625LLHALT-AAP 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000
APS12625LLHALT-BAP 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000
APS12625LLHALX-AAP 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:10,000
APS12625LLHALX-BAP 功能描述:2D HALL EFFECT DUAL LATCH SPEED/ 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:10,000
APS12626LLHALT-AAP 功能描述:2D HALL EFFECT QUADRATURE DUAL L 制造商:allegro microsystems, llc 系列:* 零件状态:在售 标准包装:3,000