- 您现在的位置：买卖IC网 > PDF目录16722 > ARD00342 (Microchip Technology)BOARD REF DESIGN MCP3901 PDF资料下载
参数资料
| 型号： | ARD00342 |
| 厂商： | Microchip Technology |
| 文件页数： | 18/30页 |
| 文件大小： | 0K |
| 描述： | BOARD REF DESIGN MCP3901 |
| 设计资源： | ARD00342 Bill of Materials ARD00342 Schematic |
| 标准包装： | 1 |
| 主要目的： | 电源管理，电度表/功率表 |
| 嵌入式： | 是，MCU，8 位 |
| 已用 IC / 零件： | MCP3901，PIC18F65J90 |
| 主要属性： | 单相分流电度表 |
| 次要属性： | USB 接口 |
| 已供物品： | 板，线缆 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
PCA2002
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 8 — 25 November 2011
25 of 30
NXP Semiconductors
PCA2002
32 kHz watch circuit with programmable output period and pulse width
14.3.2 Quality of solder joint
A flip-chip joint is considered to be a good joint when the entire solder land has been
wetted by the solder from the bump. The surface of the joint should be smooth and the
shape symmetrical. The soldered joints on a chip should be uniform. Voids in the bumps
after reflow can occur during the reflow process in bumps with high ratio of bump diameter
to bump height, i.e. low bumps with large diameter. No failures have been found to be
related to these voids. Solder joint inspection after reflow can be done with X-ray to
monitor defects such as bridging, open circuits and voids.
14.3.3 Rework
In general, rework is not recommended. By rework we mean the process of removing the
chip from the substrate and replacing it with a new chip. If a chip is removed from the
substrate, most solder balls of the chip will be damaged. In that case it is recommended
not to re-use the chip again.
Device removal can be done when the substrate is heated until it is certain that all solder
joints are molten. The chip can then be carefully removed from the substrate without
damaging the tracks and solder lands on the substrate. Removing the device must be
done using plastic tweezers, because metal tweezers can damage the silicon. The
surface of the substrate should be carefully cleaned and all solder and flux residues
and/or underfill removed. When a new chip is placed on the substrate, use the flux
process instead of solder on the solder lands. Apply flux on the bumps at the chip side as
well as on the solder pads on the substrate. Place and align the new chip while viewing
with a microscope. To reflow the solder, use the solder profile shown in application note
AN10365 “Surface mount reflow soldering description”.
14.3.4 Cleaning
Cleaning can be done after reflow soldering.
相关PDF资料 |
PDF描述 |
|---|---|
| A3AAH-1418M | IDC CABLE - ASC14H/AE14M/ASC14H |
| V48C36E150BG | CONVERTER MOD DC/DC 36V 150W |
| H8PPS-1006G | DIP CABLE - HDP10S/AE10G/HDP10S |
| AC164127-6 | BOARD 4.3" LCD TOUCH SCREEN |
| MT2000-2.0-0-SP | HEAT SHRINK TUBING |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ARD00354 | 功能描述:放大器 IC 开发工具 MCP6N11 Wheatstone Bridge Ref Design RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| ARD00370 | 制造商:Microchip Technology Inc 功能描述:PIC18F65J90/MCP6L02 SINGLE PHASE ENERGY METER - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:BOARD REF DESIGN ENERGY METER 制造商:Microchip Technology Inc 功能描述:PIC18F65J90/MCP6L02 Energy Meter 制造商:Microchip Technology Inc 功能描述:MCP6L2, PIC18F66J93, ENERGY METER, EVAL; Silicon Manufacturer:Microchip; Core Architecture:PIC; Core Sub-Architecture:PIC18F; Silicon Core Number:MCP6L2, PIC18F66J93; Silicon Family Name:PIC18FxxJxx; Kit Contents:1x Energy Meter ;RoHS Compliant: Yes |
| ARD00385 | 功能描述:电源管理IC开发工具 MCP3911+PIC18F85K90 1 Phase Energy Meter RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| ARD00386 | 功能描述:电源管理模块 MCP1640 12V 50mA Boost Converter RoHS:否 制造商:ROHM Semiconductor 产品:AC-DC Converters 最大输入电压:264 VAC 开关频率: 输出电压:10 V to 28.8 V 输出电流:350mA 负载调节: 最大工作温度:+ 60 C 尺寸:100 mm x 16 mm x 17 mm |
| ARD00410 | 制造商:Microchip Technology Inc 功能描述:MCP16301 HIGH VOLTAGE CUK LED DRIVER BOARD - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:BOARD EVAL ANALOG MCP16301 制造商:Microchip Technology Inc 功能描述:MCP16301 High Voltage Cuk LED Driver Board, DEVTOOL - Analog |
发布紧急采购，3分钟左右您将得到回复。