参数资料
型号: AT86RF401U
厂商: ATMEL CORP
元件分类: 通信及网络
英文描述: Smart RF Wireless Data Microtransmitter
中文描述: SPECIALTY TELECOM CIRCUIT, PDSO20
封装: 4.40 X 6.50 MM, 0.65 MM PITCH, TSSOP-20
文件页数: 29/52页
文件大小: 479K
代理商: AT86RF401U
29
AT86RF401
1424F
RKE
12/03
I/O and Control
Registers
The AT86RF401 I/Os and peripherals are placed in the I/O space. The various I/O loca-
tions are accessed by the IN and OUT instructions transferring data between the 32
general-purpose working registers and the I/O space. I/O registers within the address
range $00
$1F are directly bit-accessible using the SBI and CBI instructions. In these
registers, the value of single bits can be checked by using the SBIS and SBIC instruc-
tions. Refer to Table 22 on page 45 for more details. The different I/O and peripherals
control registers are explained in the following sections.
Transmitter Control Register Descriptions
Lock Detector Configuration Register 1
LOCKDET1
Bits[7:5]
Reserved.
Bit[4]: UPOK
If set high, this bit resets the unlock counter. The bit is level sensitive, and the unlock
counter will not count unless this bit is set to
0
. Leaving this bit high essentially dis-
ables the unlock detector.
Bit[3]: ENKO (Enable Key on Bit)
If set to
1
, the rising edge of TXK starts the blackout period, during which any cycle
slips are ignored and do not affect the unlock circuit.
Bit[2]: BOD (Black Out Disable)
When set high, cycle slips are counted immediately but only if LOCK is asserted high
(TX_CNTL b[2]).
Bits[1:0] CS[1:0]: Cycle Slip Counter
These two bits determine how many cycle slips are allowed before the LOCKDETECT
signal is set low. The cycle slips are not counted unless the blackout logic is either dis-
abled or the blackout window has passed.
Table 9.
Cycle Slip Counter Definition
Bit
7
6
5
4
3
2
1
0
$10
UPOK
ENKO
BOD
CS1
CS0
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Initial Value
0
0
0
0
0
0
0
0
CS[1:0]
Functionality
00
1 cycle slip causes unlock condition
01
2 cycle slips cause unlock condition
10
3 cycle slips cause unlock condition
11
4 cycle slips cause unlock condition
相关PDF资料
PDF描述
AT86RF401X Smart RF Wireless Data Microtransmitter
AT86RF535A WiMax Transceiver 802.16-2004
AT86RF535B 3.5GHz WiMAX Transceiver
AT86ZL3201 AT86ZL3201 Z-Link⑩ Controller Customized for IEEE 802.15.4 and ZigBee⑩ Wireless Systems
AT87251G2D-SLSUL B/16-BIT MICROCONTROLLER WITH SERIAL COMMUNICATION INTERFACES
相关代理商/技术参数
参数描述
AT86RF401U-6GS 功能描述:IC MICRO TRANSM RF W/AVR 20TSSOP RoHS:否 类别:RF/IF 和 RFID >> RF 发射器 系列:- 标准包装:4,000 系列:- 频率:310MHz ~ 440MHz 应用:- 调制或协议:UHF,ASK 数据传输率 - 最大:20 kBaud 功率 - 输出:1dBm ~ 5dBm 电流 - 传输:10mA 数据接口:PCB,表面贴装 天线连接器:PCB,表面贴装 存储容量:- 特点:- 电源电压:2.2 V ~ 4 V 工作温度:-40°C ~ 85°C 封装/外壳:16-LSSOP(0.154",3.90mm 宽) 包装:带卷 (TR)
AT86RF401UEK1 制造商:Atmel Corporation 功能描述:Smart RF Wireless Data Microtransmitter
AT86RF401U-EK1 功能描述:射频发射器 Smart RF Micro Trans RoHS:否 制造商:Micrel 类型:ASK Transmitter 封装 / 箱体:SOT-23-6 工作频率:300 MHz to 450 MHz 封装:Reel
AT86RF401U-XI 功能描述:IC MICRO TX RF W/AVR 20-TSSOP RoHS:否 类别:RF/IF 和 RFID >> RF 发射器 系列:- 标准包装:4,000 系列:- 频率:310MHz ~ 440MHz 应用:- 调制或协议:UHF,ASK 数据传输率 - 最大:20 kBaud 功率 - 输出:1dBm ~ 5dBm 电流 - 传输:10mA 数据接口:PCB,表面贴装 天线连接器:PCB,表面贴装 存储容量:- 特点:- 电源电压:2.2 V ~ 4 V 工作温度:-40°C ~ 85°C 封装/外壳:16-LSSOP(0.154",3.90mm 宽) 包装:带卷 (TR)
AT86RF401X 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Smart RF Wireless Data Microtransmitter