参数资料
| 型号： | AT88SC3216C-PU |
| 厂商： | Atmel |
| 文件页数： | 13/21页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 32KBIT 1.5MHZ 8DIP |
| 产品培训模块： | Crypto Products CryptoAuthentication™ Introduction |
| 标准包装： | 12,000 |
| 系列： | CryptoMemory® |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 32K (4K x 8) |
| 速度： | 5MHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 1457 (CN2011-ZH PDF) |
AT88SC3216C
11.
11.1.
11.2.
Security Options
Anti-tearing
In the event of a power loss during a write cycle, the integrity of the device’s stored data may be recovered. This
function is optional: the host may choose to activate the anti-tearing function, depending on application requirements.
When anti-tearing is active, write commands take longer to execute, since more write cycles are required to complete
them, and data are limited to eight bytes.
Data are written first to a buffer zone in EEPROM instead of the intended destination address, but with the same
access conditions. The data are then written in the required location. If this second write cycle is interrupted due to a
power loss, the device will automatically recover the data from the system buffer zone at the next power-up.
In 2-wire mode, the host is required to perform ACK polling for up to 8 ms after write commands when anti-tearing is
active. At power-up, the host is required to perform ACK polling, in some cases for up to 2 ms, in the event that the
device needs to carry out the data recovery process.
Write Lock
If a user zone is configured in the write lock mode, the lowest address byte of an 8-byte page constitutes a write access
byte for the bytes of that page.
Example
The write lock byte at $080 controls the bytes from $080 to $087.
Figure 12.
Write Lock Example
Address
$080
$0
11011001
$1
xxxx xxxx
$2
xxxx xxxx
$3
xxxx xxxx
$4
xxxx xxxx
$5
xxxx xxxx
$6
xxxx xxxx
$7
xxxx xxxx
locked
locked
locked
The write lock byte may also be locked by writing its least significant (rightmost) bit to “0”. Moreover, when write lock
mode is activated, the write lock byte can only be programmed – that is, bits written to “0” cannot return to “1”.
In the write lock configuration, only one byte can be written at a time. Even if several bytes are received, only the first
byte will be taken into account by the device.
13
5014KS–SMEM–08/09
相关PDF资料 |
PDF描述 |
|---|---|
| AT24C64B-10PU-2.7 | IC EEPROM 64KBIT 400KHZ 8DIP |
| BR93L76-W | IC EEPROM 8KBIT 2MHZ 8DIP |
| AT24C64BN-10SU-2.7 | IC EEPROM 64KBIT 400KHZ 8SOIC |
| BR24S256FJ-WE2 | IC EEPROM 256KBIT 400KHZ 8SOP |
| EP4CE15E22C8LN | IC CYCLONE IV FPGA 15K 144EQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT88SC3216CRF | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:CryptoRF Specification |
| AT88SC3216CRF_09 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:13.56 MHz CryptoRF? EEPROM Memory 32 Kbits |
| AT88SC3216CRF-L01B | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:13.56 MHz CryptoRF EEPROM Memory 32 Kbits |
| AT88SC3216CRF-MR1 | 功能描述:电可擦除可编程只读存储器 CRYPTORF 32K, 82pF RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| AT88SC3216CRF-MS1 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:13.56 MHz CryptoRF EEPROM Memory 32 Kbits |
发布紧急采购，3分钟左右您将得到回复。