参数资料
| 型号： | AT88SC6416C-SU |
| 厂商： | Atmel |
| 文件页数： | 14/20页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 64KBIT 1.5MHZ 8SOIC |
| 产品培训模块： | Crypto Products CryptoAuthentication™ Introduction |
| 标准包装： | 12,000 |
| 系列： | CryptoMemory® |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 64K (8K x 8) |
| 速度： | 5MHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
12.2.
12.3.
12.4.
12.5.
12.6.
13.
14
Checksum
The AT88SC6416C implements a data validity check function in the form of a checksum, which may function in
standard, authentication or encryption modes.
In the standard mode, the checksum is implemented as a Modification Detection Code (MDC), in which the host may
read a MDC from the device in order to verify that the data sent was received correctly.
In the authentication and encryption modes, the checksum becomes more powerful since it provides a bidirectional
data integrity check and data origin authentication capability in the form of a Message Authentication Code (MAC).
Only the host/device that carried out a valid authentication is capable of computing a valid MAC. While operating in the
authentication or encryption modes, the use of a MAC is required. For an ongoing command, if the device calculates a
MAC different from the MAC transmitted by the host, not only is the command abandoned but the mode is also reset. A
new authentication and/or encryption activation will be required to reactivate the MAC.
Encryption
The data exchanged between the device and the host during read, write and verify password commands may be
encrypted to ensure data confidentiality.
The issuer may choose to require encryption for a user zone by settings made in the configuration memory. Any one of
four keys may be selected for use with a user zone. In this case, activation of the encryption mode is required in order
to read/write data in the zone and only encrypted data will be transmitted. Even if not required, the host may elect to
activate encryption provided the proper keys are known.
Supervisor Mode
Enabling this feature allows the holder of one specific password to gain full access to all eight password sets, including
the ability to change passwords.
Modify Forbidden
No write access is allowed in a user zone protected with this feature at any time. The user zone must be written during
device personalization prior to blowing the security fuses.
Program Only
For a user zone protected by this feature, data within the zone may be changed from a “1” to a “0”, but never from a “0”
to a “1”.
Initial Device Programming
To enable the security features of CryptoMemory, the device must first be personalized to set up several registers and
load in the appropriate passwords and keys. This is accomplished through programming the configuration memory of
CryptoMemory using simple write and read commands. To gain access to the configuration memory, the secure code
must first be successfully presented. For the AT88SC6416C device, the secure code is $F7 62 0B. After writing and
verifying data in the configuration memory, the security fuses must be blown to lock this information in the device. For
additional information on personalizing CryptoMemory, please see the application notes Programming CryptoMemory
for Embedded Applications and Initializing CryptoMemory for Smart Card Applications (at www.Atmel.com ).
AT88SC6416C
5015KS–SMEM–08/09
相关PDF资料 |
PDF描述 |
|---|---|
| AT24C128C-SSHM-B | IC EEPROM 128KBIT 400KHZ 8SOIC |
| XC5VLX50T-3FF1136C | IC FPGA VIRTEX-5 50K 1136FBGA |
| XC5VLX50T-2FFG1136I | IC FPGA VIRTEX-5 50K 1136FBGA |
| XC5VLX50T-2FF1136I | IC FPGA VIRTEX-5 50K 1136FBGA |
| XC2V2000-5BG575I | IC FPGA VIRTEX-II 575PBGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT88SC6416C-WI | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:CryptoMemory 64 Kbit |
| AT88SC6416C-Y4I | 制造商:Atmel Corporation 功能描述:CRYPTOMEMORY 8PIN SAP - Rail/Tube |
| AT88SC8100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:ASIC |
| AT88SC-ADK1 | 功能描述:安全/ 验证开发工具 ARIS plus plus DK For Cryptomemory RoHS:否 制造商:Digi International 产品:Development Kits 工具用于评估:XEB-AW140 接口类型:SPI, USB 工作电源电压:3.1 V to 3.6 V |
| AT88SC-ADK2 | 功能描述:安全/ 验证开发工具 ARIS plus DK For Cryptomemory RoHS:否 制造商:Digi International 产品:Development Kits 工具用于评估:XEB-AW140 接口类型:SPI, USB 工作电源电压:3.1 V to 3.6 V |
发布紧急采购，3分钟左右您将得到回复。