参数资料
| 型号： | AT91FR40162SB-CU-999 |
| 厂商： | Atmel |
| 文件页数： | 6/22页 |
| 文件大小： | 0K |
| 描述： | IC MCU 32BIT RISC 121BGA |
| 标准包装： | 1,000 |
| 系列： | AT91 |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 75MHz |
| 连通性： | EBI/EMI，UART/USART |
| 外围设备： | WDT |
| 输入/输出数： | 32 |
| 程序存储器容量： | 2MB（1M x 16） |
| 程序存储器类型： | 闪存 |
| RAM 容量： | 256K x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 1.65 V ~ 1.95 V |
| 振荡器型： | 外部 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 121-BGA |
| 包装： | 带卷 (TR) |
14
6410BS–ATARM–12-Jan-10
AT91FR40162SB
A separate Flash memory reset input pin (NRSTF) is provided for maximum flexibility, enabling
the reset operation to adapt to the application. When this input is at a logic high level, the mem-
ory is in its standard operating mode; a low level on this input halts the current memory
operation and puts its outputs in a high impedance state.
The Flash memory features data polling to detect the end of a program cycle. While a program
cycle is in progress, an attempted read of the last word written will return the complement of the
written data on I/O7. An open-drain NBUSY output pin provides another method of detecting the
end of a program or erase cycle. This pin is pulled low while program and erase cycles are in
progress and is released at the completion of the cycle. A toggle bit feature provides a third
means of detecting the end of a program or erase cycle.
The Flash memory is divided into 39 sectors for erase operations. To further enhance device
flexibility, an Erase Suspend feature is offered. This feature puts the erase cycle on hold for an
indefinite period and allows the user to read data from, or to write data to, any other sector within
the same memory plane. There is no need to suspend an erase cycle if the data to be read is in
the other memory plane.
The device has the capability to protect data stored in any sector. Once the data protection for a
sector is enabled, the data in that sector cannot be changed while input levels lie between
ground and VDDIO.
Note: This data protection does not prevent read accesses of the Flash.
A 6-byte command sequence (Enter Single Pulse Program Mode) allows the device to be written
to directly, using single pulses on the write control lines. This mode (Single-pulse Programming)
is exited by powering down the device or by pulsing the NRSTF pin low for a defined duration
and then bringing it back to VDDIO.
The following hardware features protect against inadvertent programming of the Flash memory:
VDDIO Sense – if VDDIO is below a certain level, the program function is inhibited.
VDDIO Power-on Delay – once VDDIO has reached the VDDIO sense level, the device will
automatically time out a certain duration before programming.
Program Inhibit – holding any one of OE low, CE high or WE high inhibits program cycles.
Noise Filter – pulses of less than a certain duration on the WE or CE inputs will not initiate a
program cycle.
相关PDF资料 |
PDF描述 |
|---|---|
| AT91M40800-33AI SL383 | IC ARM MCU 16BIT 100TQFP |
| AT91M42800A-33CJ | IC ARM7 MCU 144 BGA |
| AT91M55800A-33AU | IC ARM MCU 33MHZ 176-LQFP |
| AT91R40008-66AU | IC ARM7 MCU 100 LQFP |
| AT91RM9200-QI-002 SL383 | IC ARM MCU 16BIT 128K 208PQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT91FR40162SBPRE | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Flash memory in a single compact 121-ball BGA package |
| AT91FR40162S-CJ | 功能描述:ARM微控制器 - MCU 256K SRAM 2M FLASH IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT |
| AT91FR40162S-CJ SL383 | 制造商:Atmel Corporation 功能描述:MCU 32-bit 91F ARM7TDMI RISC 2048KB Flash 1.8V 121-Pin BGA T/R |
| AT91FR4042 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb Microcontrollers |
| AT91FR4042_02 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb Microcontrollers |
发布紧急采购，3分钟左右您将得到回复。