参数资料
| 型号： | AT91FR40162SB-CU |
| 厂商： | Atmel |
| 文件页数： | 9/22页 |
| 文件大小： | 0K |
| 描述： | IC ARM MCU FLASH 1K 121BGA |
| 标准包装： | 2,250 |
| 系列： | AT91 |
| 核心处理器： | ARM7 |
| 芯体尺寸： | 16/32-位 |
| 速度： | 75MHz |
| 连通性： | EBI/EMI，UART/USART |
| 外围设备： | WDT |
| 输入/输出数： | 32 |
| 程序存储器容量： | 2MB（1M x 16） |
| 程序存储器类型： | 闪存 |
| RAM 容量： | 256K x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 1.65 V ~ 1.95 V |
| 振荡器型： | 外部 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 121-BGA |
| 包装： | 托盘 |
17
6410BS–ATARM–12-Jan-10
AT91FR40162SB
8.
Peripherals
The AT91FR40162SB peripherals are connected to the 32-bit wide Advanced Peripheral Bus.
Peripheral registers are only word accessible. Byte and half-word accesses are not supported. If
a byte or a half-word access is attempted, the memory controller automatically masks the lowest
address bits and generates a word access.
Each peripheral has a 16-Kbyte address space allocated (the AIC only has a 4-Kbyte address
space).
8.0.1
Peripheral Registers
The following registers are common to all peripherals:
Control Register – write only register that triggers a command when a one is written to the
corresponding position at the appropriate address. Writing a zero has no effect.
Mode Register – read/write register that defines the configuration of the peripheral. Usually
has a value of 0x0 after a reset.
Data Registers – read and/or write register that enables the exchange of data between the
processor and the peripheral.
Status Register – read only register that returns the status of the peripheral.
Enable/Disable/Status Registers are shadow command registers. Writing a one in the Enable
Register sets the corresponding bit in the Status Register. Writing a one in the Disable
Register resets the corresponding bit and the result can be read in the Status Register.
Writing a bit to zero has no effect. This register access method maximizes the efficiency of bit
manipulation, and enables modification of a register with a single non-interruptible
instruction, replacing the costly read-modify-write operation.
Unused bits in the peripheral registers must be written at 0 for upward compatibility. These bits
read 0.
8.0.2
Peripheral Interrupt Control
The Interrupt Control of each peripheral is controlled from the status register using the interrupt
mask. The status register bits are ANDed to their corresponding interrupt mask bits and the
result is then ORed to generate the Interrupt Source signal to the Advanced Interrupt Controller.
The interrupt mask is read in the Interrupt Mask Register and is modified with the Interrupt
Enable Register and the Interrupt Disable Register. The enable/disable/status (or mask) makes
it possible to enable or disable peripheral interrupt sources with a non-interruptible single
instruction. This eliminates the need for interrupt masking at the AIC or Core level in real-time
and multi-tasking systems.
8.0.3
Peripheral Data Controller
The AT91FR40162SB has a 4-channel PDC dedicated to the two on-chip USARTs. One PDC
channel is dedicated to the receiver and one to the transmitter of each USART.
The user interface of a PDC channel is integrated in the memory space of each USART. It con-
tains a 32-bit Address Pointer Register (RPR or TPR) and a 16-bit Transfer Counter Register
(RCR or TCR). When the programmed number of transfers are performed, a status bit indicating
the end of transfer is set in the USART Status Register and an interrupt can be generated.
相关PDF资料 |
PDF描述 |
|---|---|
| AT91SAM7X256-AU-999 | IC ARM7 MCU 256K FLASH 100-LQFP |
| PIC16LF873-04/SP | IC MCU FLASH 4KX14 EE A/D 28DIP |
| PIC16LF873-04/SO | IC MCU FLASH 4KX14 EE A/D 28SOIC |
| PIC18LF2515-I/SO | IC MCU FLASH 24KX16 28SOIC |
| DSPIC30F4012-20I/SO | IC DSPIC MCU/DSP 48K 28SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AT91FR40162SB-CU-999 | 功能描述:ARM微控制器 - MCU BGA MRL B IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT |
| AT91FR40162SBPRE | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Flash memory in a single compact 121-ball BGA package |
| AT91FR40162S-CJ | 功能描述:ARM微控制器 - MCU 256K SRAM 2M FLASH IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT |
| AT91FR40162S-CJ SL383 | 制造商:Atmel Corporation 功能描述:MCU 32-bit 91F ARM7TDMI RISC 2048KB Flash 1.8V 121-Pin BGA T/R |
| AT91FR4042 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb Microcontrollers |
发布紧急采购，3分钟左右您将得到回复。