参数资料
型号: AT91RM9200-EK
厂商: Atmel
文件页数: 25/41页
文件大小: 0K
描述: DEVEL KIT
标准包装: 1
系列: ARM®, Thumb®
类型: MCU
适用于相关产品: ARM920T
所含物品: 开发板,AC 适配器,线缆以及软件
配用: AT91SAM-ICE-ND - EMULATOR FOR AT91 ARM7/ARM9
其它名称: Q2427672
31
1768MS–ATARM–09-Jul-09
AT91RM9200
– MSB- or LSB-first
– Optional break generation and detection
– By 8 or by-16 over-sampling receiver frequency
– Optional hardware handshaking RTS-CTS
– Optional modem signal management DTR-DSR-DCD-RI
– Receiver time-out and transmitter timeguard
– Optional Multi-drop Mode with address generation and detection
RS485 with driver control signal
ISO7816, T = 0 or T = 1 Protocols for interfacing with smart cards
– NACK handling, error counter with repetition and iteration limit
IrDA modulation and demodulation
– Communication at up to 115.2 Kbps
Test Modes
– Remote Loopback, Local Loopback, Automatic Echo
Connection of two Peripheral DMA Controller (PDC) channels
– Offers buffer transfer without processor intervention
The USART describes features allowing management of the Modem Signals DTR, DSR, DCD
and RI. For details, see ”Modem Mode” on page 435.
In the AT91RM9200, only the USART1 implements these signals, named DTR1, DSR1, DCD1
and RI1.
The USART0, USART2 and USART3 do not implement all the modem signals. Only RTS and
CTS (RTS0 and CTS0, RTS2 and CTS2, RTS3 and CTS3, respectively) are implemented in
these USARTs for other features.
Thus, programming the USART0, USART2 or the USART3 in Modem Mode may lead to unpre-
dictable results. In these USARTs, the commands relating to the Modem Mode have no effect
and the status bits relating the status of the modem signals are never activated.
10.17 Serial Synchronous Controller
Provides serial synchronous communication links used in audio and telecom applications
Contains an independent receiver and transmitter and a common clock divider
Interfaced with two PDC channels to reduce processor overhead
Offers a configurable frame sync and data length
Receiver and transmitter can be programmed to start automatically or on detection of
different event on the frame sync signal
Receiver and transmitter include a data signal, a clock signal and a frame synchronization
signal
10.18 Timer Counter
Three 16-bit Timer Counter Channels
Wide range of functions including:
– Frequency Measurement
– Event Counting
相关PDF资料
PDF描述
SCRH127-560 INDUCTOR SMD 56UH 2.35A 1KHZ
HCC10DRXN CONN EDGECARD 20POS DIP .100 SLD
R0K438099S000BE KIT STARTER FOR H8/38099
V48C2E50BG CONVERTER MOD DC/DC 2V 50W
AIMC-0402-3N9S-T INDUCTOR MULTILAYER 3.9NH 0402
相关代理商/技术参数
参数描述
AT91RM9200-QI-002 功能描述:IC ARM9 MCU 208 PQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:AT91 标准包装:9 系列:87C 核心处理器:8051 芯体尺寸:8-位 速度:40/20MHz 连通性:UART/USART 外围设备:POR,WDT 输入/输出数:32 程序存储器容量:32KB(32K x 8) 程序存储器类型:OTP EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:0°C ~ 70°C 封装/外壳:40-DIP(0.600",15.24mm) 包装:管件
AT91RM9200-QI-002 SL383 功能描述:IC ARM MCU 16BIT 128K 208PQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:AT91 标准包装:1,500 系列:AVR® ATtiny 核心处理器:AVR 芯体尺寸:8-位 速度:16MHz 连通性:I²C,LIN,SPI,UART/USART,USI 外围设备:欠压检测/复位,POR,PWM,温度传感器,WDT 输入/输出数:16 程序存储器容量:8KB(4K x 16) 程序存储器类型:闪存 EEPROM 大小:512 x 8 RAM 容量:512 x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 11x10b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:带卷 (TR)
AT91RM9200-QI-002-T 功能描述:IC MCU 32BIT 128KB ROM 208QFP 制造商:microchip technology 系列:AT91 包装:带卷(TR) 零件状态:停產 核心处理器:ARM9? 核心尺寸:16/32-位 速度:180MHz 连接性:EBI/EMI,以太网,I2C,存储卡,SPI,SSC,UART/USART,USB 外设:POR I/O 数:122 程序存储容量:128KB(128K x 8) 程序存储器类型:ROM EEPROM 容量:- RAM 容量:48K x 8 电压 - 电源(Vcc/Vdd):1.65 V ~ 1.95 V 数据转换器:- 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:208-BFQFP 供应商器件封装:208-PQFP(28x28) 基本零件编号:AT91RM9200 标准包装:200
AT91RM9200-QU-002 功能描述:ARM微控制器 - MCU 16kB SRAM 180MHz - PWM RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
AT91SAM 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:ARM-based Flash MCU