参数资料
| 型号： | ATMEGA165-16MU |
| 厂商： | Atmel |
| 文件页数： | 15/19页 |
| 文件大小： | 0K |
| 描述： | IC AVR MCU 16K 16MHZ 64-QFN |
| 产品培训模块： | megaAVR Introduction |
| 标准包装： | 260 |
| 系列： | AVR® ATmega |
| 核心处理器： | AVR |
| 芯体尺寸： | 8-位 |
| 速度： | 16MHz |
| 连通性： | SPI，UART/USART，USI |
| 外围设备： | 欠压检测/复位，POR，PWM，WDT |
| 输入/输出数： | 54 |
| 程序存储器容量： | 16KB（8K x 16） |
| 程序存储器类型： | 闪存 |
| EEPROM 大小： | 512 x 8 |
| RAM 容量： | 1K x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 2.7 V ~ 5.5 V |
| 数据转换器： | A/D 8x10b |
| 振荡器型： | 内部 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 64-VFQFN 裸露焊盘 |
| 包装： | 托盘 |
5
ATmega165/V
2573GS–AVR–07/09
Pin Descriptions
VCC
Digital supply voltage.
GND
Ground.
Port A (PA7..PA0)
Port A is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each
bit). The Port A output buffers have symmetrical drive characteristics with both high sink
and source capability. As inputs, Port A pins that are externally pulled low will source
current if the pull-up resistors are activated. The Port A pins are tri-stated when a reset
condition becomes active, even if the clock is not running.
Port B (PB7..PB0)
Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each
bit). The Port B output buffers have symmetrical drive characteristics with both high sink
and source capability. As inputs, Port B pins that are externally pulled low will source
current if the pull-up resistors are activated. The Port B pins are tri-stated when a reset
condition becomes active, even if the clock is not running.
Port B has better driving capabilities than the other ports.
Port B also serves the functions of various special features of the ATmega165 as listed
on page 62.
Port C (PC7..PC0)
Port C is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each
bit). The Port C output buffers have symmetrical drive characteristics with both high sink
and source capability. As inputs, Port C pins that are externally pulled low will source
current if the pull-up resistors are activated. The Port C pins are tri-stated when a reset
condition becomes active, even if the clock is not running.
Port D (PD7..PD0)
Port D is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each
bit). The Port D output buffers have symmetrical drive characteristics with both high sink
and source capability. As inputs, Port D pins that are externally pulled low will source
current if the pull-up resistors are activated. The Port D pins are tri-stated when a reset
condition becomes active, even if the clock is not running.
Port D also serves the functions of various special features of the ATmega165 as listed
on page 65.
Port E (PE7..PE0)
Port E is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each
bit). The Port E output buffers have symmetrical drive characteristics with both high sink
and source capability. As inputs, Port E pins that are externally pulled low will source
current if the pull-up resistors are activated. The Port E pins are tri-stated when a reset
condition becomes active, even if the clock is not running.
Port E also serves the functions of various special features of the ATmega165 as listed
on page 66.
Port F (PF7..PF0)
Port F serves as the analog inputs to the A/D Converter.
Port F also serves as an 8-bit bi-directional I/O port, if the A/D Converter is not used.
Port pins can provide internal pull-up resistors (selected for each bit). The Port F output
buffers have symmetrical drive characteristics with both high sink and source capability.
As inputs, Port F pins that are externally pulled low will source current if the pull-up
resistors are activated. The Port F pins are tri-stated when a reset condition becomes
active, even if the clock is not running. If the JTAG interface is enabled, the pull-up resis-
相关PDF资料 |
PDF描述 |
|---|---|
| ATMEGA165V-8AU | IC AVR MCU 16K 8MHZ 64TQFP |
| AT91M55800A-33CI SL383 | IC ARM MCU 16BIT 176BGA |
| AT91M42800A-33CI SL383 | IC ARM MCU 16BIT 144BGA |
| AT91M42800A-33AI SL383 | IC ARM MCU 16BIT 144TQFP |
| PIC16F84A-20/SS | IC MCU FLASH 1KX14 EE 20SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ATMEGA165A | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Atmel Microcontroller with 16/32/64K Bytes In-System Programmable Programmable |
| ATMEGA165A_11 | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Atmel Microcontroller with 16/32/64K Bytes In-System Programmable Programmable |
| ATmega165A-AN | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash |
| ATmega165A-ANR | 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash |
| ATMEGA165A-AU | 功能描述:8位微控制器 -MCU AVR 16K FLSH 512B EE 1K SRA-20MHz IND RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。