参数资料
型号: ATMEGA324P-B15AZ
厂商: Atmel
文件页数: 2/70页
文件大小: 0K
描述: IC MCU 8BIT 32KB FLASH 44TQFP
标准包装: 1,500
系列: AVR® ATmega
核心处理器: AVR
芯体尺寸: 8-位
速度: 16MHz
连通性: I²C,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 32
程序存储器容量: 32KB(16K x 16)
程序存储器类型: 闪存
EEPROM 大小: 1K x 8
RAM 容量: 2K x 8
电压 - 电源 (Vcc/Vdd): 2.7 V ~ 5.5 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 44-TQFP
包装: 带卷 (TR)
其它名称: ATMEGA324P-B15AZ-ND
10
7674F–AVR–09/09
ATmega164P/324P/644P
The fast-access Register File contains 32 x 8-bit general purpose working registers with a single
clock cycle access time. This allows single-cycle Arithmetic Logic Unit (ALU) operation. In a typ-
ical ALU operation, two operands are output from the Register File, the operation is executed,
and the result is stored back in the Register File – in one clock cycle.
Six of the 32 registers can be used as three 16-bit indirect address register pointers for Data
Space addressing – enabling efficient address calculations. One of the these address pointers
can also be used as an address pointer for look up tables in Flash program memory. These
added function registers are the 16-bit X-, Y-, and Z-register, described later in this section.
The ALU supports arithmetic and logic operations between registers or between a constant and
a register. Single register operations can also be executed in the ALU. After an arithmetic opera-
tion, the Status Register is updated to reflect information about the result of the operation.
Program flow is provided by conditional and unconditional jump and call instructions, able to
directly address the whole address space. Most AVR instructions have a single 16-bit word for-
mat. Every program memory address contains a 16- or 32-bit instruction.
Program Flash memory space is divided in two sections, the Boot Program section and the
Application Program section. Both sections have dedicated Lock bits for write and read/write
protection. The SPM instruction that writes into the Application Flash memory section must
reside in the Boot Program section.
During interrupts and subroutine calls, the return address Program Counter (PC) is stored on the
Stack. The Stack is effectively allocated in the general data SRAM, and consequently the Stack
size is only limited by the total SRAM size and the usage of the SRAM. All user programs must
initialize the SP in the Reset routine (before subroutines or interrupts are executed). The Stack
Pointer (SP) is read/write accessible in the I/O space. The data SRAM can easily be accessed
through the five different addressing modes supported in the AVR architecture.
The memory spaces in the AVR architecture are all linear and regular memory maps.
A flexible interrupt module has its control registers in the I/O space with an additional Global
Interrupt Enable bit in the Status Register. All interrupts have a separate Interrupt Vector in the
Interrupt Vector table. The interrupts have priority in accordance with their Interrupt Vector posi-
tion. The lower the Interrupt Vector address, the higher the priority.
The I/O memory space contains 64 addresses for CPU peripheral functions as Control Regis-
ters, SPI, and other I/O functions. The I/O Memory can be accessed directly, or as the Data
Space locations following those of the Register File, 0x20 - 0x5F. In addition, the
ATmega164P/324P/644P has Extended I/O space from 0x60 - 0xFF in SRAM where only the
ST/STS/STD and LD/LDS/LDD instructions can be used.
5.2
ALU – Arithmetic Logic Unit
The high-performance AVR ALU operates in direct connection with all the 32 general purpose
working registers. Within a single clock cycle, arithmetic operations between general purpose
registers or between a register and an immediate are executed. The ALU operations are divided
into three main categories – arithmetic, logical, and bit-functions. Some implementations of the
architecture also provide a powerful multiplier supporting both signed/unsigned multiplication
and fractional format. See the “Instruction Set” section for a detailed description.
相关PDF资料
PDF描述
MS3110F14-19S CONN RCPT 19POS WALL MNT W/SCKT
VI-B7H-IX-F1 CONVERTER MOD DC/DC 52V 75W
MS3116F14-19SY CONN PLUG 19POS STRAIGHT W/SCKT
XR17D158IV IC UART PCI BUS OCTAL 144LQFP
VI-B7H-IW-F4 CONVERTER MOD DC/DC 52V 100W
相关代理商/技术参数
参数描述
ATMEGA324P-B15MZ 功能描述:8位微控制器 -MCU 32KB FLASH AUTO 125Deg revision B RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATMEGA324PB-AN 功能描述:IC MCU 8BIT 32KB FLASH 44TQFP 制造商:microchip technology 系列:AVR? ATmega 包装:托盘 零件状态:在售 核心处理器:AVR 核心尺寸:8-位 速度:20MHz 连接性:I2C,SPI,UART/USART 外设:欠压检测/复位,POR,PWM,WDT I/O 数:39 程序存储容量:32KB(16K x 16) 程序存储器类型:闪存 EEPROM 容量:1K x 8 RAM 容量:2K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:44-TQFP 供应商器件封装:44-TQFP 标准包装:160
ATMEGA324PB-ANR 功能描述:IC MCU 8BIT 32KB FLASH 44TQFP 制造商:microchip technology 系列:AVR? ATmega 包装:剪切带(CT) 零件状态:在售 核心处理器:AVR 核心尺寸:8-位 速度:20MHz 连接性:I2C,SPI,UART/USART 外设:欠压检测/复位,POR,PWM,WDT I/O 数:39 程序存储容量:32KB(16K x 16) 程序存储器类型:闪存 EEPROM 容量:1K x 8 RAM 容量:2K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:44-TQFP 供应商器件封装:44-TQFP 标准包装:1
ATMEGA324PB-AU 功能描述:IC MCU 8BIT 32KB FLASH 44TQFP 制造商:microchip technology 系列:AVR? ATmega 包装:散装 零件状态:在售 核心处理器:AVR 核心尺寸:8-位 速度:20MHz 连接性:I2C,SPI,UART/USART 外设:欠压检测/复位,POR,PWM,WDT I/O 数:39 程序存储容量:32KB(16K x 16) 程序存储器类型:闪存 EEPROM 容量:1K x 8 RAM 容量:2K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:44-TQFP 供应商器件封装:44-TQFP 标准包装:160
ATMEGA324PB-AUR 功能描述:IC MCU 8BIT 32KB FLASH 44TQFP 制造商:microchip technology 系列:AVR? ATmega 包装:带卷(TR) 零件状态:在售 核心处理器:AVR 核心尺寸:8-位 速度:20MHz 连接性:I2C,SPI,UART/USART 外设:欠压检测/复位,POR,PWM,WDT I/O 数:39 程序存储容量:32KB(16K x 16) 程序存储器类型:闪存 EEPROM 容量:1K x 8 RAM 容量:2K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:44-TQFP 供应商器件封装:44-TQFP 标准包装:2,000