收藏本站
参数资料
型号： ATSTK505
厂商： Atmel
文件页数： 10/11页
文件大小： 0K
描述： ADAPTER KIT FOR 14PIN AVR MCU
标准包装： 1
附件类型： STK500 扩展模块
适用于相关产品： 14 引脚和 20 引脚 ATtiny AVR 设备
配用： ATSTK500-ND - PROGRAMMER AVR STARTER KIT
相关产品： ATTINY24A-MU-ND - MCU AVR 2KB FLASH 20MHZ 20QFN
ATTINY24A-MMH-ND - MCU AVR 2K FLASH 20MHZ 20VQFN
ATTINY24A-PU-ND - MCU AVR 2K FLASH 20MHZ 14PDIP
ATTINY24A-SSU-ND - MCU AVR 2K FLASH 20MHZ 14SOIC
ATTINY261-15XZTR-ND - MCU AVR 2K FLASH 15MHZ 20-TSSOP
ATTINY261-15SZTR-ND - MCU AVR 2K FLASH 15MHZ 20-SOIC
ATTINY261-15MZTR-ND - MCU AVR 2K FLASH 15MHZ 32-QFN
ATTINY24-15SSZTR-ND - MCU AVR 2K FLASH 15MHZ 14-SOIC
ATTINY24-15MZTR-ND - MCU AVR 2K FLASH 15MHZ 20-QFN
ATTINY261V-10SU-ND - IC MCU AVR 2K FLASH 10MHZ 20SOIC
更多...
Troubleshooting Guide
Programming problems
Problem
ISP
Cause
ISP cable is not
Solution
Connect a 6-pin cable between the
programming connected
does not work
ISP6PIN connector on STK500 and
the ISP connector on STK505 on the
selected target section. See also
Programming the AVR.
ISP
The AVR is running at Make sure the clock switch on
programming too low clock
does not work frequency.
STK500 is in the right position. In
the Board page of the programming
dialog in AVR Studio, try reducing
the clock frequency so less or equal
to the frequency the AVR is running
at.
ISP
The SPI enable fuse is Program the SPI enable fuse using
programming
does not work
not programmed.
high voltage programming.
ISP
The Reset Disable fuse Unprogram the Reset Disable fuse
programming
does not work
is programmed.
using high voltage programming.
ISP
The DebugWire fuse is Unprogram the DebugWire fuse using
programming
does not work
High-Voltage
programming
programmed.
The 10-pin cables are
not connected
high voltage programming.
See the Programming the AVR
chapter for setup.
does not work. correctly.
High-Voltage
The (BSEL2),
See the Programming the AVR
programming
OSCSEL, RESET and chapter for setup.
does not work. VTARGET jumpers on
STK500 are not set
correctly.
High-Voltage
programming
The STK505 clock
switch is in the wrong
Set the switch to the EXT CLK
position. See also Programming the
does not work. position.
AVR.
High-Voltage
programming
The STK505 Reset
switch is in PORTB
Set the switch to the RESET position.
does not work. position
10
相关PDF资料
PDF描述
ATSTK520 ADAPTER KIT FOR 90PWM
ATSTK521 EXPANSION MODULE ATSTK500
ATSTK524 KIT STARTER ATMEGA32M1/MEGA32C1
ATSTK525 KIT STARTER FOR AT90USB
AU-Y1005-2-R CONN USB 2.0 R/A FMAL TYPE-A PCB
相关代理商/技术参数
参数描述
ATSTK520 功能描述:开发板和工具包 - AVR AVR Starter Kit Ext 8K FLASH 3PSC RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V
ATSTK521 功能描述:子卡和OEM板 ATSTK500 expansion module for AT90PWM81 RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
ATSTK524 功能描述:开发板和工具包 - AVR Starter Kit for ATMEGA32M1/C1 RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V
ATSTK525 功能描述:开发板和工具包 - AVR Starter Kit for the AT90USB microcntrllr RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V
ATSTK526 功能描述:开发板和工具包 - AVR Starter Kit for AT90USB82/162 RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*