参数资料
| 型号： | ATSTK505 |
| 厂商： | Atmel |
| 文件页数： | 6/11页 |
| 文件大小： | 0K |
| 描述： | ADAPTER KIT FOR 14PIN AVR MCU |
| 标准包装： | 1 |
| 附件类型： | STK500 扩展模块 |
| 适用于相关产品： | 14 引脚和 20 引脚 ATtiny AVR 设备 |
| 配用： | ATSTK500-ND - PROGRAMMER AVR STARTER KIT |
| 相关产品： | ATTINY24A-MU-ND - MCU AVR 2KB FLASH 20MHZ 20QFN ATTINY24A-MMH-ND - MCU AVR 2K FLASH 20MHZ 20VQFN ATTINY24A-PU-ND - MCU AVR 2K FLASH 20MHZ 14PDIP ATTINY24A-SSU-ND - MCU AVR 2K FLASH 20MHZ 14SOIC ATTINY261-15XZTR-ND - MCU AVR 2K FLASH 15MHZ 20-TSSOP ATTINY261-15SZTR-ND - MCU AVR 2K FLASH 15MHZ 20-SOIC ATTINY261-15MZTR-ND - MCU AVR 2K FLASH 15MHZ 32-QFN ATTINY24-15SSZTR-ND - MCU AVR 2K FLASH 15MHZ 14-SOIC ATTINY24-15MZTR-ND - MCU AVR 2K FLASH 15MHZ 20-QFN ATTINY261V-10SU-ND - IC MCU AVR 2K FLASH 10MHZ 20SOIC 更多... |
Programming the AVR
Introduction
There are two different ways of programming the AVR on STK505:
1. Low Voltage Programming (also called In-System Programming)
2. High-Voltage Programming (serial mode for tiny24 or parallel mode for
tiny26)
From now on Low Voltage Programming will be described as In-System
Programming.
The following sections will describe how to connect the appropriate cables. See
the STK500 user guide for how to use the AVR Studio Programming Dialog .
In-System programming
To program the device on the STK505 using the In-System Programming (ISP)
mode, connect a 6-pin cable between the ISP6PIN connector on STK500 and the
SPROG connector on STK505 colored section corresponding to the device used.
I.e. if programming ATtiny24, connect the 6-pin cable to the SPROG header on
the green section, as shown in figure 2-1.
If programming ATtiny26 connect the 6-pin cable to the SPROG header on the
blue section, as shown in figure 2-2.
Then start the Programming Dialog in AVR Studio
Figure 2-1: In-System Programming of the ATtiny24
6
相关PDF资料 |
PDF描述 |
|---|---|
| ATSTK520 | ADAPTER KIT FOR 90PWM |
| ATSTK521 | EXPANSION MODULE ATSTK500 |
| ATSTK524 | KIT STARTER ATMEGA32M1/MEGA32C1 |
| ATSTK525 | KIT STARTER FOR AT90USB |
| AU-Y1005-2-R | CONN USB 2.0 R/A FMAL TYPE-A PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ATSTK520 | 功能描述:开发板和工具包 - AVR AVR Starter Kit Ext 8K FLASH 3PSC RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V |
| ATSTK521 | 功能描述:子卡和OEM板 ATSTK500 expansion module for AT90PWM81 RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit |
| ATSTK524 | 功能描述:开发板和工具包 - AVR Starter Kit for ATMEGA32M1/C1 RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V |
| ATSTK525 | 功能描述:开发板和工具包 - AVR Starter Kit for the AT90USB microcntrllr RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V |
| ATSTK526 | 功能描述:开发板和工具包 - AVR Starter Kit for AT90USB82/162 RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V |
发布紧急采购，3分钟左右您将得到回复。