参数资料
型号: ATTINY13V-10SUR
厂商: Atmel
文件页数: 94/176页
文件大小: 0K
描述: MCU AVR 1KB FLASH 10MHZ 8SOIC
产品培训模块: tinyAVR Introduction
标准包装: 2,000
系列: AVR® ATtiny
核心处理器: AVR
芯体尺寸: 8-位
速度: 10MHz
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 6
程序存储器容量: 1KB(512 x 16)
程序存储器类型: 闪存
EEPROM 大小: 64 x 8
RAM 容量: 64 x 8
电压 - 电源 (Vcc/Vdd): 1.8 V ~ 5.5 V
数据转换器: A/D 4x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 8-SOIC(0.209",5.30mm 宽)
包装: 带卷 (TR)
其它名称: ATTINY13V-10SUR-ND
ATTINY13V-10SURTR
24
2535J–AVR–08/10
ATtiny13
6.1.4
ADC Clock – clkADC
The ADC is provided with a dedicated clock domain. This allows halting the CPU and I/O clocks
in order to reduce noise generated by digital circuitry. This gives more accurate ADC conversion
results.
6.2
Clock Sources
The device has the following clock source options, selectable by Flash fuse bits as shown
below. The clock from the selected source is input to the AVR clock generator, and routed to the
appropriate modules.
Note:
1. For all fuses “1” means unprogrammed while “0” means programmed.
The various choices for each clocking option is given in the following sections. When the CPU
wakes up from Power-down or Power-save, the selected clock source is used to time the start-
up, ensuring stable Oscillator operation before instruction execution starts. When the CPU starts
from reset, there is an additional delay allowing the power to reach a stable level before com-
mencing normal operation. The Watchdog Oscillator is used for timing this real-time part of the
start-up time. The number of WDT Oscillator cycles used for each time-out is shown in Table 6-
6.2.1
External Clock
To drive the device from an external clock source, CLKI should be driven as shown in Figure 6-
2. To run the device on an external clock, the CKSEL fuses must be programmed to “00”.
Figure 6-2.
External Clock Drive Configuration
Table 6-1.
Device Clocking Options Select
Device Clocking Option
Table 6-2.
Number of Watchdog Oscillator Cycles
Typ Time-out
Number of Cycles
4 ms
512
64 ms
8K (8,192)
EXTERNAL
CLOCK
SIGNAL
CLKI
GND
相关PDF资料
PDF描述
ATTINY15L-1SU IC MCU AVR 1K FLASH 1.6MHZ 8SOIC
ATTINY2313-20SUR IC MCU AVR 2K FLASH 20SOIC
ATTINY2313A-MMHR IC MCU AVR 2K FLASH 3X3 20QFN
ATTINY26-16MQR IC MCU AVR 2K 16MHZ IND 32QFN
ATTINY26L-8PU IC MCU AVR 2K 5V 8MHZ 20-DIP
相关代理商/技术参数
参数描述
ATTINY13V-W-11 功能描述:8位微控制器 -MCU Microcontroller RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATTINY13-W 功能描述:8位微控制器 -MCU Microcontroller RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATTINY13-W-11 功能描述:8位微控制器 -MCU Microcontroller RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
ATTINY15 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:8-BIT AVR㈢ Microcontroller with 1K Byte Flash
ATTINY15(PDIP) 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller