- 您现在的位置：买卖IC网 > PDF目录298849 > AYF331535 15 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SURFACE MOUNT PDF资料下载
参数资料
| 型号： | AYF331535 |
| 元件分类： | SMT连接器& FFC/FPC |
| 英文描述： | 15 CONTACT(S), FEMALE, RIGHT ANGLE FFC/FPC CONNECTOR, SURFACE MOUNT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 4/5页 |
| 文件大小： | 433K |
| 代理商： | AYF331535 |
AYF33
Connector orientation with respect to embossed tape feeding direction
NOTES
Type
Direction
of tape progress
Y3B
1. Recommended PC board and metal
mask patterns
Appropriate control of solder amount is
required to minimize solder bridges and
other defects for connectors with 0.3 mm,
0.4 mm or 0.5 mm pitch terminals, which
require high-density mounting. Refer to
the recommended PC board pattern.
2. Precautions for insertion/removal of
FPC
Do not apply an excessive load to the
lever in the opening direction beyond its
open position; otherwise, the lever may
be deformed or removed.
Do not open/close the lever without an
FPC inserted; otherwise, the terminals
may be deformed, and the FPC insertion
force may increase.
Do not apply an excessive load to the
lever in a direction perpendicular to the
lever rotation axis or in the lever opening
direction; otherwise, the terminals may
be deformed, and the lever may be
removed.
These connectors are of the back lock
type, which has the FPC insertion section
on the opposite side of the lever. Be
careful not to make a mistake in the FPC
insertion position or the lever opening/
closing position. Otherwise, a contact
failure or connector breakage may occur.
These connectors have top and bottom
double contacts. Do not insert an FPC
upside down. Inserting an FPC in a
direction opposite to that you intended
may cause an operation failure or
malfunction.
Fully open the lever to insert an FPC.
Completely insert the FPC horizontally.
An FPC inserted at an excessive angle to
the board may cause the deformation of
metal parts, FPC insertion failures, and
FPC circuit breakages.
Insert the FPC to the full depth of the
connector without altering the angle.
To close the lever, turn down the lever by
pressing the entire lever or both sides of
the lever with the balls of ngers.
Be careful. If pressure to the lever is
applied unevenly, such as to an edge
only, it may deform or break. Also, make
sure that the lever is closed completely.
Not doing so will cause a faulty
connection.
Avoid applying an excessive load to the
top of the lever during or after closing the
lever. Otherwise, the terminals may be
deformed.
When opening the lever to remove the
FPC, ensure that the lever will not go over
the initial position; otherwise, the lever
may be removed.
Remove the FPC at parallel with the lever
fully opened. If the lever is closed, or if
the FPC is forcedly pulled, the product or
FPC may break.
If a lever is accidentally detached during
the handling of a connector, do not use
the connector any longer.
After an FPC is inserted, carefully handle
it so as not to apply excessive stress to
the base of the FPC.
Number of contacts/
dimension
B
C
7
1.80
1.20
9
2.40
1.80
13
3.60
3.00
15
4.20
3.60
21
6.00
5.40
23
6.60
6.00
25
7.20
6.60
27
7.80
7.20
31
9.00
8.40
33
9.60
9.00
35
10.20
9.60
39
11.40
10.80
45
13.20
12.60
51
15.00
14.40
Terminal
Connector outline (lever opened)
3.20
±
0.03
0.70
±
0.03
0.50
±
0.03
B
±0.05
0.60
±0.03
0.30
±0.03
C
±0.05
0.60
±0.03
0.30
±0.03
Recommended PC board pattern
(Mount pad arrangement pattern)
For other cautions, please refer to the
last page.
panasonic-electric-works.net/ac
相关PDF资料 |
PDF描述 |
|---|---|
| AYU1-1P-02676-120 | BOARD TERMINATED, MALE, RF CONNECTOR, SURFACE MOUNT |
| AYU1-1S13-D0251-000(LF) | CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET |
| AYU1-1S21-S0800-213W(LF) | CABLE TERMINATED, FEMALE, RF CONNECTOR, SOCKET |
| AYZ0202AGRL | SLIDE SWITCH, DPDT, LATCHED, 0.1A, 12VDC, SURFACE MOUNT-STRAIGHT |
| AYZ0203AGRL | SLIDE SWITCH, DP3T, LATCHED, 0.1A, 12VDC, SURFACE MOUNT-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AYF331535A | 功能描述:15 Position FPC Connector Contacts, Top and Bottom 0.012" (0.30mm) Surface Mount, Right Angle 制造商:panasonic electric works 系列:Y3B 包装:剪带 零件状态:有效 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触头，上和下 针脚数:15 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.036"（0.90mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 标准包装:500 |
| AYF331565 | 功能描述:FFC & FPC连接器 FPC Connectors 0.3mm, 15 contacts RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
| AYF331735 | 制造商:Panasonic Electric Works 功能描述:FPC CONNECTOR Y3B (0.3MM PITCH, |
| AYF331735A | 功能描述:CONN FPC 17POS 0.30MM R/A 制造商:panasonic electric works 系列:Y3B 包装:剪带 零件状态:在售 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触头，上和下 针脚数:17 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.036"（0.90mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 触头镀层厚度:闪光 外壳颜色:- 致动器颜色:- 配接次数:20 标准包装:500 |
| AYF331765 | 功能描述:FFC & FPC连接器 FPC Connectors 0.3mm, 17 contacts RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A |
发布紧急采购，3分钟左右您将得到回复。