- 您现在的位置：买卖IC网 > PDF目录18946 > B57550G0503F000 (EPCOS Inc)THERMISTOR NTC 50K OHM 1% RAD PDF资料下载
参数资料
| 型号： | B57550G0503F000 |
| 厂商： | EPCOS Inc |
| 文件页数： | 16/19页 |
| 文件大小： | 0K |
| 描述： | THERMISTOR NTC 50K OHM 1% RAD |
| 产品目录绘图： | B57550G0x0xF000 Side |
| 标准包装： | 1,000 |
| 系列： | B57550 |
| 在 25°C 时的电阻（欧姆）： | 50k |
| 电阻公差： | ±1% |
| B 值公差： | ±1% |
| B25/85： | 3992K |
| B25/100： | 4006K |
| 工作温度： | -55°C ~ 200°C |
| 功率 - 最大： | 32mW |
| 长度 - 引线： | 2.80"（71.00mm） |
| 安装类型： | 通孔 |
| 封装/外壳： | 珠，玻璃 |
| 包装： | 散装 |
| 其它名称： | 495-2134 B57550G 503F B57550G503F |
Temperature measurement
Glass-encapsulated sensors
B57550G, B57550G1
G550/G1550
Mounting
Ensure that no thermo-mechanical stress occurs due to production processes (curing or
overmolding processes) when thermistors are sealed, potted or overmolded or during their
subsequent operation. The maximum temperature of the thermistor must not be exceeded.
Ensure that the materials used (sealing/potting compound and plastic material) are chemically
neutral.
Electrodes/contacts must not be scratched or damaged before/during/after the mounting
process.
Contacts and housing used for assembly with the thermistor must be clean before mounting.
Ensure that adjacent materials are designed for operation at temperatures comparable to the
surface temperature of the thermistor. Be sure that surrounding parts and materials can
withstand the temperature.
Avoid contamination of the thermistor surface during processing.
The connections of sensors (e.g. cable end, wire end, plug terminal) may only be exposed to
an environment with normal atmospheric conditions.
Tensile forces on cables or leads must be avoided during mounting and operation.
Bending or twisting of cables or leads directly on the thermistor body is not permissible.
Avoid using chemical substances as mounting aids. It must be ensured that no water or other
liquids enter the NTC thermistors (e.g. through plug terminals). In particular, water based
substances (e.g. soap suds) must not be used as mounting aids for sensors.
Operation
Use thermistors only within the specified operating temperature range.
Use thermistors only within the specified power range.
Environmental conditions must not harm the thermistors. Only use the thermistors under
normal atmospheric conditions or within the specified conditions.
Contact of NTC thermistors with any liquids and solvents should be prevented. It must be
ensured that no water enters the NTC thermistors (e.g. through plug terminals). For
measurement purposes (checking the specified resistance vs. temperature), the component
must not be immersed in water but in suitable liquids (e.g. Galden).
Avoid dewing and condensation unless thermistor is specified for these conditions.
Bending or twisting of cables and/or wires is not permissible during operation of the sensor in
the application.
Be sure to provide an appropriate fail-safe function to prevent secondary product damage
caused by malfunction.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 19
相关PDF资料 |
PDF描述 |
|---|---|
| DS1822 | IC THERMOMETER ECONO DIG TO-92 |
| 507-4860-3732-500F | LED PANEL IND 14V 20MA GREEN |
| AH1460619-A | SWITCH MINI SPDT PLUNG GOLD PCB |
| 559-6401-003F | LED PANEL DAYLT WHT SNAP-IN 6"LD |
| 559-6201-003F | LED PANEL DAYLT GRN SNAP-IN 6"LD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B57550G0503F002 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement |
| B57550G0503G000 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement |
| B57550G0503G002 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement |
| B57550G0503H000 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement |
| B57550G0503H002 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement |
发布紧急采购，3分钟左右您将得到回复。