- 您现在的位置：买卖IC网 > PDF目录18323 > B81123C1682M (EPCOS Inc)CAP FILM 6800PF 3KVDC RADIAL PDF资料下载
参数资料
| 型号： | B81123C1682M |
| 厂商： | EPCOS Inc |
| 文件页数： | 11/18页 |
| 文件大小： | 0K |
| 描述： | CAP FILM 6800PF 3KVDC RADIAL |
| 产品目录绘图： | Y(1,2), X(1,2) Series Side 1 Y(1,2), X(1,2) Series Side 2 |
| 标准包装： | 2,040 |
| 系列： | B81123 |
| 电容： | 6800pF |
| 额定电压 - AC： | 250V |
| 额定电压 - DC： | 3000V（3kV） |
| 电介质材料： | 聚丙烯，金属化 |
| 容差： | ±20% |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 径向 |
| 尺寸/尺寸： | 1.043" L x 0.335" W（26.50mm x 8.50mm） |
| 高度 - 座高（最大）： | 0.650"（16.50mm） |
| 端子： | PC 引脚 |
| 引线间隔： | 0.886"（22.50mm） |
| 特点： | EMI 抑制 |
| 应用： | EMI 抑制 Y1 |
| 包装： | 散装 |
| 其它名称： | 495-1654 B81123C1682M000 |
B81123
Y1 / 250 V AC
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 18
相关PDF资料 |
PDF描述 |
|---|---|
| 34ASP53B4V2QT | TOG MINI SPDT O-O-O N VB LF |
| FDG6301N | MOSFET N-CHAN DUAL 25V SC70-6 |
| 2N7002V | MOSF N CH DL 60V 280MA SOT-563F |
| 34CMSP41B2M6RT | TOG SMIN SPDT O-O-O RAH LF |
| 34CMSP12B4M7RT | TOG SMIN SPDT O-N-O N RAV LF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B81123-C1682-M | 制造商:EPCOS 功能描述:Bulk |
| B81123C1682M | 制造商:TDK-EPC 功能描述:CAPACITOR CLASS Y1 6.8NF |
| B81123C1682M000 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:EMI Suppression Capacitors (MKP) |
| B81123C1682M189 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:EMI Suppression Capacitors (MKP) |
| B81123C1682M289 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:EMI Suppression Capacitors (MKP) |
发布紧急采购，3分钟左右您将得到回复。