- 您现在的位置：买卖IC网 > PDF目录298850 > BCM5802 SPECIALTY MICROPROCESSOR CIRCUIT, PQFP144 PDF资料下载
参数资料
| 型号： | BCM5802 |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | SPECIALTY MICROPROCESSOR CIRCUIT, PQFP144 |
| 封装： | 28 X 28 MM, QFP-144 |
| 文件页数： | 11/41页 |
| 文件大小： | 571K |
| 代理商： | BCM5802 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页
Altera Corporation
19
MAX 9000 Programmable Logic Device Family Data Sheet
The VCCIO pins can be connected to either a 3.3-V or 5.0-V power supply,
depending on the output requirements. When the VCCIO pins are
connected to a 5.0-V power supply, the output levels are compatible with
5.0-V systems. When the VCCIO pins are connected to a 3.3-V power
supply, the output high is at 3.3 V and is therefore compatible with 3.3-V
or 5.0-V systems. Devices operating with VCCIO levels lower than 4.75 V
incur a nominally greater timing delay of tOD2 instead of tOD1.
In-System
Programma-
bility (ISP)
MAX 9000 devices can be programmed in-system through a 4-pin JTAG
interface. ISP offers quick and efficient iterations during design
development and debug cycles. The MAX 9000 architecture internally
generates the 12.0-V programming voltage required to program EEPROM
cells, eliminating the need for an external 12.0-V power supply to
program the devices on the board. During ISP, the I/O pins are tri-stated
to eliminate board conflicts.
ISP simplifies the manufacturing flow by allowing the devices to be
mounted on a printed circuit board with standard pick-and-place
equipment before they are programmed. MAX 9000 devices can be
programmed by downloading the information via in-circuit testers,
embedded processors, or the Altera BitBlaster, ByteBlaster, or
ByteBlasterMV download cable. (The ByteBlaster cable is obsolete and has
been replaced by the ByteBlasterMV cable, which can interface with 2.5-V,
3.3-V, and 5.0-V devices.) Programming the devices after they are placed
on the board eliminates lead damage on high pin-count packages (e.g.,
QFP packages) due to device handling. MAX 9000 devices can also be
reprogrammed in the field (i.e., product upgrades can be performed in the
field via software or modem).
In-system programming can be accomplished with either an adaptive or
constant algorithm. An adaptive algorithm reads information from the
unit and adapts subsequent programming steps to achieve the fastest
possible programming time for that unit. Because some in-circuit testers
platforms have difficulties supporting an adaptive algorithm, Altera
offers devices tested with a constant algorithm. Devices tested to the
constant algorithm are marked with an “F” suffix in the ordering code.
Programming
with External
Hardware
MAX 9000 devices can be programmed on Windows-based PCs with an
Altera Logic Programmer card, the Master Programming Unit (MPU),
and the appropriate device adapter. The MPU performs continuity
checking to ensure adequate electrical contact between the adapter and
the device.
f For more information, see the Altera Programming Hardware Data Sheet.
相关PDF资料 |
PDF描述 |
|---|---|
| BCW34 | Bipolar NPN Device |
| BCY59C | Bipolar NPN Device in A Hermetically sealed TO18 Metal Package |
| BCY78CDWP | 32 V, PNP, Si, SMALL SIGNAL TRANSISTOR |
| BCY78BDWP | 32 V, PNP, Si, SMALL SIGNAL TRANSISTOR |
| BD-A532RD | 7 SEG NUMERIC DISPLAY, GREEN, 13.208 mm |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BCM5805 | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| BCM58101B2KFBG | 功能描述:LYNX 250MHZ, NO NFC, GENERAL OTP 制造商:broadcom limited 系列:* 零件状态:在售 标准包装:1 |
| BCM58101LB2KFBG | 功能描述:LYNX 100MHZ, NO NFC, GENERAL OTP 制造商:broadcom limited 系列:* 零件状态:在售 标准包装:1 |
| BCM5820 | 制造商:BOARDCOM 制造商全称:Broadcom Corporation. 功能描述:E-COMMERCE PROCESSOR |
| BCM5821 | 制造商:BOARDCOM 制造商全称:Broadcom Corporation. 功能描述:SUPER E-COMMERCE PROCESSOR |
发布紧急采购，3分钟左右您将得到回复。