- 您现在的位置：买卖IC网 > PDF目录295139 > BD00HA5EFJ-E2 ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 PDF资料下载
参数资料
| 型号： | BD00HA5EFJ-E2 |
| 元件分类： | 可调正电压单路输出LDO稳压器 |
| 英文描述： | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| 封装： | ROHS COMPLIANT, HTSOP-8 |
| 文件页数： | 9/12页 |
| 文件大小： | 416K |
| 代理商： | BD00HA5EFJ-E2 |
www.rohm.com
2010.10 - Rev.A
2010 ROHM Co., Ltd. All rights reserved.
Technical Note
6/11
BD00IA5WEFJ
Stable area characteristics
(Characteristics example)
●
Heat Loss
Thermal design should allow operation within the following conditions. Note that the temperatures listed are the allowed
temperature limits, and thermal design should allow sufficient margin from the limits.
1. Ambient temperature Ta can be no higher than 85℃.
2. Chip junction temperature (Tj) can be no higher than 150℃.
Chip junction temperature can be determined as follows:
①
Calculation based on ambient temperature (Ta)
Tj=Ta+θj-a×W
＜
Reference values＞
θ
j-a：HTSOP-J8 153.2℃/W
113.6℃/W
59.2℃/W
33.3℃/W
1-layer substrate (copper foil density 0mm×0mm)
2-layer substrate (copper foil density 15mm×15mm)
2-layer substrate (copper foil density 70mm×70mm)
4-layer substrate (copper foil density 70mm×70mm)
Substrate size: 70×70×1.6mm
3 (substrate with thermal via)
Most of the heat loss that occurs in the BD00IA5WEFJ is generated from the output Pch FET. Power loss is determined by
the total Vcc-Vo voltage and output current. Be sure to confirm the system input and output voltage and the output current
conditions in relation to the heat dissipation characteristics of the VIN and Vo in the design. Bearing in mind that heat
dissipation may vary substantially depending on the substrate employed (due to the power package incorporated in the
BD00IA5WEFJ make certain to factor conditions such as substrate size into the thermal design.
Power consumption (W) = Input voltage (VCC)- Output voltage (Vo)
×
Io(Ave)
Example) Where VCC=3.3V, VO=2.5V, Io(Ave) = 0.1A,
Power consumption (W) = 3.3(V)-2.5(V) ×0.1(A)
=0.08(W)
●
About equivalent series resistance ESR (ceramic capacitor etc.)
Capacitor usually has ESR(Equivalent Series Resistance), and
operates stable in ESR-OUT range, showed right. Generally, ESR of
ceramic, tantalum and electronic capacitor etc. is different for each,
so please be sure to check a capacitor which is going to use, and
use it inside the stable range, showed right. Then, please evaluate
for the actual application
0.01
0.1
1
10
100
0
50
100
150
200
IOUT [mA]
ESR
[
]
Capacity-Bias characteristics
相关PDF资料 |
PDF描述 |
|---|---|
| BD00HA5WEFJ-E2 | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| BD00HA5WEFJ | ADJUSTABLE POSITIVE LDO REGULATOR, PDSO8 |
| BD45485G | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| BD4837FVE | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| BD538 | Complemetary Silicon Power Transistors(互补硅功率晶体管) |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD00HA5MEFJ-M | 制造商:ROHM 制造商全称:Rohm 功能描述:Automotive 0.5A Variable Output LDO Regulator |
| BD00HA5MEFJ-ME2 | 功能描述:Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5 V ~ 7 V 500mA 8-HTSOP-J 制造商:rohm semiconductor 系列:汽车级，AEC-Q100 包装:* 零件状态:有效 稳压器拓扑:正，可调式 电压 - 输出:1.5 V ~ 7 V 电流 - 输出:500mA 电压 - 跌落（典型值）:0.6V @ 500mA 稳压器数:1 电压 - 输入:4.5 V ~ 8 V 电流 - 限制（最小值）:- 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽）裸焊盘 供应商器件封装:8-HTSOP-J 标准包装:1 |
| BD00HA5WEFJ | 制造商:ROHM 制造商全称:Rohm 功能描述:500mA Secondary Variable Output LDO Regulators for Local Power Supplies |
| BD00HA5WEFJ_13 | 制造商:ROHM 制造商全称:Rohm 功能描述:500mA Variable Fixed Output LDO Regulators |
| BD00HA5WEFJ-E2 | 功能描述:低压差稳压器 - LDO LDO REG 0.8V-7V 0.5A 8PIN RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。