参数资料
| 型号： | BD00HC0WEFJ-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 11/20页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO ADJ 1A 8-HTSOP |
| 特色产品： | CMOS LDO Regulators |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，可调式 |
| 输出电压： | 0.8 V ~ 7 V |
| 输入电压： | 4.5 V ~ 8 V |
| 电压 - 压降（标准）： | 0.6V @ 1A |
| 稳压器数量： | 1 |
| 电流 - 输出： | 1A（最小值） |
| 工作温度： | -25°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm Width）裸露焊盘 |
| 供应商设备封装： | 8-HTSOP-J |
| 包装： | 标准包装 |
| 其它名称： | BD00HC0WEFJ-E2DKR |
BD00HC0WEFJ
Datasheet
● Input-to-Output Capacitor
It is recommended that a capacitor (over 1uF) is placed near pins between the input pin and GND as well as the output pin
and GND. A capacitor, between input pin and GND, is valid when the power supply impedance is high or trace is long. Also,
as for the capacitor between the output pin and GND, the greater the capacitance, the more sustainable the line regulation
will be and the capacitor will make improvements of characteristics depending on the load. However, please check the
actual functionality of this part by mounting it on a board for the actual application. Ceramic capacitors usually have different,
thermal and equivalent series resistance characteristics, and moreover capacitance decreases gradually in use.
For additional details, please check with the manufacturer, and select the best ceramic capacitor for your application.
10
Rated Voltage ： 10V
Rated Voltage ： 10V
B1 characteristics
0
-10
-20
-30
-40
-50
-60
Rated Voltage:10V
F characteristics
B characteristics
Rated Voltage ： 6.3V
B characteristics
Rated Voltage ： 4V
X6S characteristics
-70
-80
-90
-100
0
1
2
3
4
DC Bias Voltage [V]
Ceramic capacitor capacity – DC bias characteristics
(Characteristics example)
● Equivalent Series Resistance ESR (Output capacitor)
To prevent oscillations, please attach a capacitor between
V O and GND. Capacitors usually have ESR (Equivalent
Series Resistance). Operation will be stable in the ESR-I O
range shown to the right. Ceramic, tantalum and
electrolytic Capacitors have different ESR values, so
please ensure that you are using a capacitor that operates
in the stable operating region shown on the right. Finally,
please evaluate in the actual application.
10.00
1.00
0.10
0.01
Safety Area
C O =1 μ F
0
0.2
0.4
0.6
0.8
1
Io [A]
ESR – I O characteristics
www.rohm.com
? 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 ? 15 ? 001
11/17
TSZ02201-0R6R0A600060-1-2
17.Jan.2013 Rev.002
相关PDF资料 |
PDF描述 |
|---|---|
| BD00HC5WEFJ-E2 | IC REG LDO ADJ 1.5A 8-HTSOP |
| BD2046AFJ-E2 | IC SWITCH HIGH SIDE 2CH SOP-J8 |
| BD2051AFJ-E2 | IC SWITCH HIGH SIDE 1CH SOP-J8 |
| BD2055AFJ-E2 | IC SWITCH HIGH SIDE 1CH SOP-J8 |
| BD2061AFJ-E2 | IC SWITCH USB HI SIDE 1CH SOP-J8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD00HC5EFJ-E2 | 制造商:ROHM 制造商全称:Rohm 功能描述:1A Secondary Variable Output LDO Regulators for Local Power Supplies |
| BD00HC5MEFJ-E2 | 制造商:ROHM 制造商全称:Rohm 功能描述:Automotive 1.5A Variable Output LDO Regulator |
| BD00HC5MEFJ-LBH2 | 功能描述:1.5A VARIABLE OUTPUT INDUSTRIAL 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:可调式 稳压器数:1 电压 - 输入（最大值）:8V 电压 - 输出（最小值/固定）:1.5V 电压 - 输出（最大值）:7V 压降（最大值）:1.2V @ 1.5A 电流 - 输出:1.5A 电流 - 电源（最大值）:1.2mA PSRR:- 控制特性:使能 保护功能:过流，超温，软启动 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽）裸露焊盘 供应商器件封装:8-HTSOP-J 标准包装:1 |
| BD00HC5MEFJ-M | 制造商:ROHM 制造商全称:Rohm 功能描述:Automotive 1.5A Variable Output LDO Regulator |
| BD00HC5MEFJ-ME2 | 制造商:ROHM 制造商全称:Rohm 功能描述:Automotive 1.5A Variable Output LDO Regulator |
发布紧急采购，3分钟左右您将得到回复。