参数资料
| 型号： | BD35221EFV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 18/21页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 1.2V 4A HTSSOP-B20 |
| 标准包装： | 2,500 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 1.2V |
| 输入电压： | 1.25 V ~ 5.5 V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 4A（最小） |
| 工作温度： | -10°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-VSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-HTSSOP-B |
| 包装： | 带卷 (TR) |
● Operation Notes
1.
Absolute maximum ratings
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down the devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. If any
over rated values will expect to exceed the absolute maximum ratings, consider adding circuit protection devices, such as
fuses.
2. Connecting the power supply connector backward
Connecting of the power supply in reverse polarity can damage IC. Take precautions when connecting the power supply
lines. An external direction diode can be added.
3. Power supply lines
Design PCB layout pattern to provide low impedance GND and supply lines. To obtain a low noise ground and supply line,
separate the ground section and supply lines of the digital and analog blocks. Furthermore, for all power supply terminals to
ICs, connect a capacitor between the power supply and the GND terminal. When applying electrolytic capacitors in the
circuit, not that capacitance characteristic values are reduced at low temperatures.
4. GND voltage
The potential of GND pin must be minimum potential in all operating conditions.
5. Thermal design
Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.
6. Inter-pin shorts and mounting errors
Use caution when positioning the IC for mounting on printed circuit boards. The IC may be damaged if there is any
connection error or if pins are shorted together.
7. Actions in strong electromagnetic field
Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to
malfunction.
8. ASO
When using the IC, set the output transistor so that it does not exceed absolute maximum ratings or ASO.
9. Thermal shutdown circuit
The IC incorporates a built-in thermal shutdown circuit (TSD circuit). The thermal shutdown circuit (TSD circuit) is designed
only to shut the IC off to prevent thermal runaway. It is not designed to protect the IC or guarantee its operation. Do not
continue to use the IC after operating this circuit or use the IC in an environment where the operation of this circuit is
assumed.
TSD on temperature [°C] (typ.)
BD3522EFV/BD35221EFV/BD35222EFV 175
10. Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
Always discharge capacitors after each process or step. Always turn the IC's power supply off before connecting it to or
removing it from a jig or fixture during the inspection process. Ground the IC during assembly steps as an antistatic
measure. Use similar precaution when transporting or storing the IC.
18/20
相关PDF资料 |
PDF描述 |
|---|---|
| HCC28DRAH | CONN EDGECARD 56POS R/A .100 SLD |
| BD35222EFV-E2 | IC REG LDO 1.5V 4A HTSSOP-B20 |
| LT1117CST-5#TRPBF | IC REG LDO 5V .8A SOT-223 |
| GBB91DHNN-S621 | CONN EDGECARD 182POS .050 SOLDER |
| GBB91DHND-S621 | CONN EDGECARD 182POS .050 SOLDER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD35222EFV | 制造商:ROHM 制造商全称:Rohm 功能描述:Ultra Low Dropout Linear Regulators(4A) for Desktop PC |
| BD35222EFV-E2 | 功能描述:IC REG LDO 1.5V 4A HTSSOP-B20 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:More Information on LDOs 标准包装:50 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:最高 15V 电压 - 压降（标准）:1.1V @ 800mA 稳压器数量:1 电流 - 输出:800mA 电流 - 限制（最小）:800mA 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-263-4，D²Pak（3 引线+接片），TO-263AA 供应商设备封装:D2PAK-3 包装:管件 |
| BD3522EFV | 制造商:ROHM 制造商全称:Rohm 功能描述:Ultra Low Dropout Linear Regulators(4A) for Desktop PC |
| BD3522EFV_08 | 制造商:ROHM 制造商全称:Rohm 功能描述:Ultra Low Dropout Linear Regulators(4A) for Desktop PC |
| BD3522EFV-E2 | 功能描述:IC REG LDO ADJ 4A HTSSOP-B20 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:More Information on LDOs 标准包装:50 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:最高 15V 电压 - 压降（标准）:1.1V @ 800mA 稳压器数量:1 电流 - 输出:800mA 电流 - 限制（最小）:800mA 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-263-4，D²Pak（3 引线+接片），TO-263AA 供应商设备封装:D2PAK-3 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。