参数资料
| 型号： | BD3571HFP-TR |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V .5A HRP5 |
| 标准包装： | 2,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 5.5 V ~ 36 V |
| 电压 - 压降（标准）： | 0.25V @ 200mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 500mA（最小值） |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | HRP-5 |
| 供应商设备封装： | HRP-5 |
| 包装： | 带卷 (TR) |
Datasheet
Notice
General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
Precaution on using ROHM Products
1.
2.
3.
4.
5.
6.
7.
8.
9.
If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment,
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl 2 ,
H 2 S, NH 3 , SO 2 , and NO 2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
The Products are not subject to radiation-proof design.
Please verify and confirm characteristics of the final or mounted products in using the Products.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
Confirm that operation temperature is within the specified range described in the product specification.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Notice - Rev.004
? 2013 ROHM Co., Ltd. All rights reserved.
相关PDF资料 |
PDF描述 |
|---|---|
| RMM22DTBD-S189 | CONN EDGECARD 44POS R/A .156 SLD |
| EMM22DKKN | CONN EDGECARD 44POS .156 WW |
| RGM22DTBD-S189 | CONN EDGECARD 44POS R/A .156 SLD |
| EMM22DKKH | CONN EDGECARD 44POS .156 WW |
| RCA50DRMD-S273 | CONN EDGECARD 100POS .125 SQ WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD3571YFP-ME2 | 功能描述:HIGH VOLTAGE LDO REGULATORS 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:36V 电压 - 输出（最小值/固定）:5V 电压 - 输出（最大值）:- 压降（最大值）:0.48V @ 200mA 电流 - 输出:500mA 电流 - 静态（Iq):50μA PSRR:55dB（120Hz） 控制特性:- 保护功能:过流，超温，短路 工作温度:-40°C ~ 125°C（TA） 安装类型:表面贴装 封装/外壳:TO-252-3，DPak（2 引线 + 接片），SC-63 供应商器件封装:TO-252-3 标准包装:1 |
| BD3571YHFP-MTR | 功能描述:HIGH VOLTAGE LDO REGULATORS 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:36V 电压 - 输出（最小值/固定）:5V 电压 - 输出（最大值）:- 压降（最大值）:0.48V @ 200mA 电流 - 输出:500mA 电流 - 静态（Iq):50μA PSRR:55dB（120Hz） 控制特性:- 保护功能:过流，超温，短路 工作温度:-40°C ~ 125°C（TA） 安装类型:表面贴装 封装/外壳:TO-263-6，D2Pak（5 引线 + 接片），TO-263BA 供应商器件封装:HRP-5 标准包装:1 |
| BD3572FP | 制造商:ROHM 制造商全称:Rohm 功能描述:High Voltage LDO Regulators |
| BD3572FP-E2 | 功能描述:IC REG LDO ADJ .5A TO252-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| BD3572HFP | 制造商:ROHM 制造商全称:Rohm 功能描述:High Voltage LDO Regulators |
发布紧急采购，3分钟左右您将得到回复。