参数资料
| 型号： | BD3571HFP-TR |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V .5A HRP5 |
| 标准包装： | 2,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 5.5 V ~ 36 V |
| 电压 - 压降（标准）： | 0.25V @ 200mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 500mA（最小值） |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | HRP-5 |
| 供应商设备封装： | HRP-5 |
| 包装： | 带卷 (TR) |
BD3570FP/HFP, BD3571FP/HFP, BD3572FP/HFP, BD3573FP/HFP
BD3574FP/HFP, BD3575FP/HFP
Technical Note
● Peripheral Settings for Pins and Precautions
1) V CC pins
Insert capacitors with a capacitance of 0.33 μ F to 1000 μ F between the V CC and GND pins.
The capacitance varies with the application. Be sure to design the capacitance with a sufficient margin.
2) Capacitors for stopping oscillation for output pins
Capacitors for stopping oscillation must be placed between each output pin and the GND pin. Use a capacitor within a
capacitance range between 0.1 μ F and 1000 μ F. Since oscillation does not occur even for ESR values from 0.001 Ω to
100 Ω , a ceramic capacitor can be used. Abrupt input voltage and load fluctuations can affect output voltages. Output
capacitor capacitance values should be determined after sufficient testing of the actual application.
● Operation Notes
1) Absolute maximum ratings
Use of the IC in excess of absolute maximum ratings such as the applied voltage or operating temperature range may
result in IC damage. Assumptions should not be made regarding the state of the IC (short mode or open mode) when
such damage is suffered. A physical safety measure such as a fuse should be implemented when use of the IC in a
special mode where the absolute maximum ratings may be exceeded is anticipated.
2) GND potential
Ensure a minimum GND pin potential in all operating conditions.
3) Setting of heat
Use a thermal design that allows for a sufficient margin in light of the power dissipation (Pd) in actual operating conditions.
4) Pin short and mistake fitting
Use caution when orienting and positioning the IC for mounting on printed circuit boards. Improper mounting may result in
damage to the IC. Shorts between output pins or between output pins and the power supply and GND pins caused by the
presence of a foreign object may result in damage to the IC.
5) Actions in strong magnetic field
Use caution when using the IC in the presence of a strong magnetic field as doing so may cause the IC to malfunction.
6) Testing on application boards
When testing the IC on an application board, connecting a capacitor to a pin with low impedance subjects the IC to stress.
Always discharge capacitors after each process or step. Be sure to turn power off when mounting or dismounting jigs at
the inspection stage. Furthermore, for countermeasures against static electricity, ground the equipment at the assembling
stage and pay utmost attention at the time of transportation or storing the product.
7) This monolithic IC contains P+ isolation and P substrate layers between adjacent elements in order to keep them isolated.
PN junction is formed by the P layer and the N layer of each element, and a variety of parasitic elements will be
constituted.
For example, when a resistor and transistor are connected to pins as shown in Fig. 19,
? the P/N junction functions as a parasitic diode when GND>Pin A for the resistor or GND>Pin B for the transistor
(NPN).
? Similarly, when GND ＞ Pin B for the transistor (NPN), the parasitic diode described above combines with the N
layer of other adjacent elements to operate as a parasitic NPN transistor.
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
6/9
2011.03 - Rev.B
相关PDF资料 |
PDF描述 |
|---|---|
| RMM22DTBD-S189 | CONN EDGECARD 44POS R/A .156 SLD |
| EMM22DKKN | CONN EDGECARD 44POS .156 WW |
| RGM22DTBD-S189 | CONN EDGECARD 44POS R/A .156 SLD |
| EMM22DKKH | CONN EDGECARD 44POS .156 WW |
| RCA50DRMD-S273 | CONN EDGECARD 100POS .125 SQ WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD3571YFP-ME2 | 功能描述:HIGH VOLTAGE LDO REGULATORS 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:36V 电压 - 输出（最小值/固定）:5V 电压 - 输出（最大值）:- 压降（最大值）:0.48V @ 200mA 电流 - 输出:500mA 电流 - 静态（Iq):50μA PSRR:55dB（120Hz） 控制特性:- 保护功能:过流，超温，短路 工作温度:-40°C ~ 125°C（TA） 安装类型:表面贴装 封装/外壳:TO-252-3，DPak（2 引线 + 接片），SC-63 供应商器件封装:TO-252-3 标准包装:1 |
| BD3571YHFP-MTR | 功能描述:HIGH VOLTAGE LDO REGULATORS 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:在售 输出配置:正 输出类型:固定 稳压器数:1 电压 - 输入（最大值）:36V 电压 - 输出（最小值/固定）:5V 电压 - 输出（最大值）:- 压降（最大值）:0.48V @ 200mA 电流 - 输出:500mA 电流 - 静态（Iq):50μA PSRR:55dB（120Hz） 控制特性:- 保护功能:过流，超温，短路 工作温度:-40°C ~ 125°C（TA） 安装类型:表面贴装 封装/外壳:TO-263-6，D2Pak（5 引线 + 接片），TO-263BA 供应商器件封装:HRP-5 标准包装:1 |
| BD3572FP | 制造商:ROHM 制造商全称:Rohm 功能描述:High Voltage LDO Regulators |
| BD3572FP-E2 | 功能描述:IC REG LDO ADJ .5A TO252-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| BD3572HFP | 制造商:ROHM 制造商全称:Rohm 功能描述:High Voltage LDO Regulators |
发布紧急采购，3分钟左右您将得到回复。