- 您现在的位置：买卖IC网 > Datasheet目录315 > BD6142AMUV-E2 (Rohm Semiconductor)IC LED DRIVER SGL STEP UP 24QFN Datasheet资料下载
参数资料
| 型号： | BD6142AMUV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 9/33页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER SGL STEP UP 24QFN |
| 标准包装： | 2,500 |
| 拓扑： | PWM，升压（升压） |
| 输出数： | 8 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 1MHz ~ 1.5MHz |
| 电源电压： | 4.2 V ~ 27 V |
| 输出电压： | 41V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-VFQFN 裸露焊盘 |
| 供应商设备封装： | VQFN024V4040 |
| 包装： | 带卷 (TR) |
| 工作温度： | -40°C ~ 85°C |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
BD6142AMUV
Datasheet
● Functional descriptions
1) PWM current mode DC/DC converter
While this IC is power ON, the lowest voltage of CH1, 2, 3, 4, 5, 6, 7, 8 is detected, PWM duty is decided to be 0.8V
and output voltage is kept invariably. As for the inputs of the PWM comparator as the feature of the PWM current mode, one
is overlapped with error components from the error amplifier, and the other is overlapped with a current sense signal that
controls the inductor current into Slope waveform to prevent sub harmonic oscillation. This output controls internal Nch Tr
via the RS latch. In the period where internal Nch Tr gate is ON, energy is accumulated in the external inductor, and in the
period where internal Nch Tr gate is OFF, energy is transferred to the output capacitor via external SBD.
This IC has many safety functions, and their detection signals stop switching operation at once.
2) Pulse skips control
This IC regulates the output voltage using an improved pulse-skip. In “pulse-skip” mode the error amplifier disables
“switching” of the power stages when it detects low output voltage and high input voltage. The oscillator halts and the
controller skip switching cycles. The error amplifier reactivates the oscillator and starts switching of the power stages again
when this IC detects low input voltage.
At light loads a conventional “pulse-skip” regulation mode is used. The “pulse-skip” regulation minimizes the operating
current because this IC does not switch continuously and hence the losses of the switching are reduced. When the error
amplifier disables “switching”, the load is also isolated from the input. This improved “pulse-skip” control is also referred to
as active-cycle control.
PWM
VOUT
LX
duty 20% @1.25MHz(typ)
Pulse skip
LED current
20mA
Figure 14. Pulse-skip
3) Soft start
This IC has soft start function.
The soft start function prevents large coil current.
Rush current at turning on is prevented by the soft start function.
After ENABLE, PWM is changed ‘L’ ? ‘H’, and UVLO is detected, soft start becomes effective for within typ 4.3ms and soft
start doesn't become effective even if ENABLE is changed ‘L’ ? ‘H’ after that.
ENABLE
Max 1ms
Typ 4.3ms
ENABLE
Max 1ms
Soft Start Time=T1+T2=4.3ms typ.
PWM
UVLO
PWM
UVLO
VDC
VDC
T1
T2
Soft start
OFF
ON
OFF
ON
Soft start
OFF
ON
OFF
ON
OFF
Figure 15. Soft start
4) FAULT
When the error condition occurs, boost operating is stopped by the protection function, and the error condition is outputted
from FAULT. After power ON, when the protection function is operating under about 4.3ms(typ.) have passed.
Once ENABLE change to ‘L’, FAULT status is reset
ENABLE
Object of protect function is as shown below.
PWM
- Over-voltage protection (OVP)
VDC
Typ4.3 ms
Mask
Typ100 μ s
- Thermal shut down (OTP)
FAULT
‘X’
‘H’
‘L’
‘H’
‘L’
‘X’
‘H’
un-detection
- Over current limit (OCP)
- Output short protect
- LED Short (Latch)
- LED Open (Latch)
Protection
function(OVP, TSD, OCP)
Protection
un-detect
function(LED open, LED short)
detect
Latch
detect
un-detect
un-detect
Boost
operating
off
normal
boost stop
normal
off
normal
Figure 16. FAULT operating description
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
TSZ22111 ? 15 ? 001
9/30
TSZ02201-0G3G0C400340-1-2
03.Dec.2012 Rev.001
相关PDF资料 |
PDF描述 |
|---|---|
| BD6581GU-E2 | IC LED DVR WHT BCKLGHT VCSP85H2 |
| BD6583MUV-AE2 | IC LED DRIVER WHIT BCKLGT 24VQFN |
| BD6586MUV-E2 | IC LED DRVR WHITE BCKLGT 24-VQFN |
| BD6592MUV-E2 | IC LED DRVR WHITE BCKLGT 24-VQFN |
| BD7844AEFV-E2 | IC LED DISPLAY DVR 5V 28-HTSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD615 | 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:PNP SILICON EPIBASE TRANSISTORS |
| BD6150CS | 制造商:PANJIT 制造商全称:Pan Jit International Inc. 功能描述:SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS |
| BD6150CT | 制造商:PANJIT 制造商全称:Pan Jit International Inc. 功能描述:SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS |
| BD6150MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
| BD6150MUV_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
发布紧急采购，3分钟左右您将得到回复。