- 您现在的位置：买卖IC网 > Datasheet目录315 > BD6586MUV-E2 (Rohm Semiconductor)IC LED DRVR WHITE BCKLGT 24-VQFN Datasheet资料下载
参数资料
| 型号： | BD6586MUV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 8/23页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR WHITE BCKLGT 24-VQFN |
| 标准包装： | 1 |
| 拓扑： | PWM，升压（升压） |
| 输出数： | 4 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 700kHz ~ 1.3MHz |
| 电源电压： | 2.7 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-VFQFN 裸露焊盘 |
| 供应商设备封装： | VQFN024V4040 |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 85°C |
| 产品目录页面： | 1372 (CN2011-ZH PDF) |
| 其它名称： | BD6586MUV-E2DKR |
BD6586MUV
Datasheet
● The Separations of the IC Power Supply and Coil Power Supply
This IC can work in separating the power source in both IC power supply and coil power supply. With this application, it can
obtain that decrease of IC power consumption, and the applied voltage exceeds IC rating 5.5V.
That application is shown in below Figure 9. The higher voltage source is applied to the power source of coil that is
connected from an adapter etc. Next, the IC power supply is connected with a different coil power supply.
When the coil power supply is applied, it is no any problem even though IC power supply is the state of 0V. Although IC
power supply is set to 0V, pull-down resistance is arranged for the power off which cuts off the leak route from coil power
supply in IC inside, the leak route is cut off. And, there is no power on-off sequence of coil power supply and IC power
supply.
Other Power Supply
6V to 25V
Battery
2.7V to 5.5V
4.7 μ F
4.7 μ H
2.2 μ F
6LED x 4Parallel
SW
SW
SW
VBAT
VDET
TRSW
EN2
Power
LED1
ON/OFF
EN1
PWM
LED2
LED3
TESTO
TEST
PGND PGND
GND
GND
GND
ISET
LED4
Each 20mA
24k ?
Figure 9. Each battery and coil power supply
● The Coil Selection
The DC/DC is designed by more than 4.7μH. When L value sets to a lower value, it is possibility that the specific
sub-harmonic oscillation of current mode DC / DC will be happened.
Please do not let L value to 3.3μH or below.
And, L value increases, the phase margin of DC / DC becomes to zero. Please enlarge the output capacitor value when you
increase L value.
Example)
4.7μH = output capacitor 2.2μF/50V 1pcs
6.8μH = output capacitor 2.2μF/50V 2pcs
10μH = output capacitor 2.2μF/50V 3pcs
This value is just examples, please made sure the final judgment is under an enough evaluation.
● The Adjustment of the Switching Wave Form
A switching wave form between the coil and the switch terminal can be adjusted by connecting a capacitor to TRSW.
Switching noise can be restrained though efficiency is made to decrease by connecting a capacitor.
Decide capacity value after the enough evaluation when you adjust switching noise.
SW
SW
TRSW PGND
TRSW
PGND
Figure 10. The adjustment of the switching wave form
www.rohm.com
? 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111 ? 15 ? 001
8/20
TSZ02201-0G3G0C400190-1-2
10.Dec.2012 Rev.001
相关PDF资料 |
PDF描述 |
|---|---|
| BD6592MUV-E2 | IC LED DRVR WHITE BCKLGT 24-VQFN |
| BD7844AEFV-E2 | IC LED DISPLAY DVR 5V 28-HTSSOP |
| BD8105FV-E2 | IC LED DVR SERIAL PAR 20-SSOP |
| BD8112EFV-ME2 | IC LED DRIVER 24-VSSOP |
| BD8119FM-ME2 | IC WHITE LED DVR PWM 28-HSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD6590MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
| BD6590MUV_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
| BD6590MUV-E2 | 制造商:ROHM Semiconductor 功能描述:White backlight LED Driver,106LEDs,40V |
| BD6592MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit |
| BD6592MUV_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
发布紧急采购，3分钟左右您将得到回复。