- 您现在的位置：买卖IC网 > Datasheet目录316 > BD8112EFV-ME2 (Rohm Semiconductor)IC LED DRIVER 24-VSSOP Datasheet资料下载
参数资料
| 型号： | BD8112EFV-ME2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 9/25页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER 24-VSSOP |
| 应用说明： | Automotive Applications |
| 标准包装： | 1 |
| 恒定电流： | 是 |
| 拓扑： | 高端，低端，PWM，降压（降压），升压（升压） |
| 输出数： | 2 |
| 内部驱动器： | 两者兼有 |
| 类型 - 主要： | 车载，背光 |
| 类型 - 次要： | 高亮度 LED（HBLED），白色 LED |
| 频率： | 250kHz ~ 600kHz |
| 电源电压： | 5 V ~ 30 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-VSSOP（0.220"，5.60mm 宽）裸露焊盘 |
| 供应商设备封装： | 24-HTSSOP |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 105°C |
| 其它名称： | BD8112EFV-ME2DKR |
BD8112EFV-M
Technical Note
? Soft Start Function
The soft-start (SS) limits the current and slows the rise-time of the output voltage during the start-up, and hence leads to
prevention of the overshoot of the output voltage and the inrush current.
? Self-diagnostic functions
The operating status of the built-in protection circuitry is propagated to FAIL1 and FAIL2 pins (open-drain outputs). FAIL1
becomes low when UVLO, TSD, OVP, or SCP protection is engaged, whereas FAIL2 becomes low when open or short
LED is detected.
FAIL2
FAIL1
OPEN
UVLO
TSD
OVP
OCP
SHORT
MASK
S
R
Q
SCP
Counter
S
Q
EN=Low
UVLO/TSD
EN=Low
R
UVLO/TSD
? Operation of the Protection Circuitry
? Under-Voltage Lock Out (UVLO)
The UVLO shuts down all the circuits other than REG when VREG ≦ 4.3V (TYP).
? Thermal Shut Down (TSD)
The TSD shuts down all the circuits other than REG when the Tj reaches 175 ℃ (TYP), and releases when the Tj
becomes below 150 ℃ (TYP).
? Over Current Protection (OCP)
The OCP detects the current through the power-FET by monitoring the voltage of the high-side resistor, and activates
when the CS voltage becomes less than VCC-0.6V (TYP).
When the OCP is activated, the external capacitor of the SS pin becomes discharged and the switching operation of
the DCDC turns off.
? Over Voltage Protection (OVP)
The output voltage of the DCDC is detected with the OVP-pin voltage, and the protection activates when the OVP-pin
voltage becomes greater than 2.0V (TYP).
When the OVP is activated, the external capacitor of the SS pin becomes discharged and the switching operation of
the DCDC turns off.
? Short Circuit Protection (SCP)
When the LED-pin voltage becomes less than 0.3V (TYP), the internal counter starts operating and latches off the circuit
approximately after 100ms (when FOSC = 300 kHz). If the LED-pin voltage becomes over 0.3V before 100ms, then the
counter resets. When the LED anode (i.e. DCDC output voltage) is shorted to ground, then the LED current becomes off
and the LED-pin voltage becomes low. Furthermore, the LED current also becomes off when the LED cathode is shorted
to ground. Hence in summary, the SCP works with both cases of the LED anode and the cathode being shorted.
? LED Open Detection
When the LED-pin voltage ? 0.3V (TYP) as well as OVP-pin voltage ? 1.7V (TYP) simultaneously, the device detects as
LED open and latches off that particular channel.
www.rohm.com
? 2010 ROHM Co., Ltd. All rights reserved.
9/22
2011.08 - Rev.C
相关PDF资料 |
PDF描述 |
|---|---|
| BD8119FM-ME2 | IC WHITE LED DVR PWM 28-HSOP |
| BD82103GWL-E2 | IC LED DRVR WHITE BCKLGT 11-UCSP |
| BD9206EFV-E2 | IC LED DRIVER 6V LCD 20HTSSOP |
| BD9207FPS-E2 | IC LED DVR STEPDWN 1.5A TO252S-5 |
| BH-14E_TI-20T_CTI | ADAPTER PIN CONVERTER 14-20 PIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD8113EFV | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
| BD8113EFV_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:White Backlight LED Driver for Medium to Large LCD Panels (Switching Regulator Type) |
| BD8113EFV-E2 | 功能描述:LED照明驱动器 IC LED DRIVER RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| BD8115F-M | 制造商:ROHM 制造商全称:Rohm 功能描述:LED Driver IC |
| BD8115F-MTE2 | 功能描述:LED照明驱动器 Auto Grade LED Drvr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。