- 您现在的位置：买卖IC网 > PDF目录145822 > BM1301-7PD4H 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | BM1301-7PD4H |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE M02, MODULE |
| 文件页数： | 11/25页 |
| 文件大小： | 569K |
| 代理商： | BM1301-7PD4H |
Cassette Style
DC-DC Converters
M Series
Edition 01/01.2001
19/25
Table 18: Configuration of option A and option P
Type of option
AM...LM/CMZ...LMZ 1000
AM...LM/CMZ...LMZ 2000
AM...LM/CMZ...LMZ 3000
Output 1
Output 2
Output 1
Output 2
Output 3
Potentiometer 1
yes
no
Test sockets
yes
no
1 AM...LM 1000 types equipped with option P do not provide the R input simultaneously, pins 14 and 17 are not connected.
-9 Extended Temperature Range
Option -9 extends the operational ambient temperature
range from –25...71
°C (standard) to –40...71°C. The power
supplies provide full nominal output power with convection
cooling.
A Test Sockets
Test sockets (pin = 2 mm, distance d = 5.08 mm) are lo-
cated at the front of the module. The output voltage is
sensed at the connector pins inside the module.
P Potentiometer
Optionally built-in multi-turn potentiometers provide an out-
put voltage adjustment range of minimum
±5% of U
o nom
and are accessible through holes in the front cover. Com-
pensation of voltage drop across connector and wiring be-
comes easily achievable. For output voltages
Uo > Uo nom,
the minimum input voltage according to:
Electrical Input
Data increases proportionally to Uo/Uo nom.
Note: Potentiometers are not recommended for mobile ap-
plications.
Description of Options
Table 17: Survey of options
Option
Function of option
Characteristic
–9
Extended operational ambient temperature range
TA = –40...71°C
A
Test sockets at front panel for check of output voltage
Uo internally measured at the connector terminals
E
Electronic inrush current limitation circuitry
Active inrush current limitation for CM, EM, LM, CMZ, LMZ
P 1
Potentiometer for fine adjustment of output voltage
Adjustment range
±5% of U
o nom, excludes R input
F
Input fuse built-in inside case
Fuse not externally accessible
H
Enhanced output to case electric strength test voltage
2000 V AC (standard: 1000 V AC)
D 2
Input and/or output undervoltage monitoring circuitry
Safe data signal output (D0...D9)
V 2 3
Input and/or output undervoltage monitoring circuitry
ACFAIL signal according to VME specifications (V0, V2, V3)
1 Function R excludes option P and vice versa
2 Option D excludes option V and vice versa
3 Only available if main output voltage Uo1 = 5.1 V
AC-DC
front
end
DC-DC
con-
verter
Mains
Battery
SELV
Earth connection
(class I)
+
–
~
10018
Max. 250 V AC or
400 (250) V DC
Max. 250 V AC or
400 (250) V DC
Fuse
Fig. 18
Schematic safety concept.
Use earth connection as per table:
Safety concept leading
to an SELV output circuit. Use fuse if required by the appli-
cation. See also:
Installation Instructions.
Standards and Approvals
AM...LM DC-DC converters correspond to class I equip-
ment, while CMZ, DMZ, LMZ types correspond to class II
equipment. All types are UL recognized according to UL
1950, UL recognized for Canada to CAN/CSA C22.2 No.
950-95 and LGA approved to IEC/EN 60950 standards.
The units have been evaluated for:
Building in
Basic insulation between input and case and double or
reinforced insulation between input and output, based on
250 V AC and 400 V DC (class I equipment)
Double or reinforced insulation between input and case
and between input and output, based on 250 V AC and
DC (class II equipment)
Operational insulation between output(s) and case
Operational insulation between the outputs
The use in a pollution degree 2 environment
Connecting the input to a primary or secondary circuit
with a maximum transient rating of 2500 V
The DC-DC converters are subject to manufacturing sur-
veillance in accordance with the above mentioned UL,
CSA, EN and with ISO 9001 standards.
相关PDF资料 |
PDF描述 |
|---|---|
| BM1301-7RD9 | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| BM1301-7RV0F | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| BM1301-9PD1HF | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| BM1301-9PD3AH | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| BM1501-7PD4 | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BM1301-7R | 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 12V 4A 50W 11PIN - Bulk |
| BM1301-9R | 制造商:Power-One 功能描述:DC/DC Power Supply Single-OUT 12V 4A 50W 11-Pin 制造商:Power-One 功能描述:ACDC - Bulk |
| BM1-32 | 制造商:SMC 功能描述:Switch mounting band for 32mm cylinder |
| BM1383AGLV-ZE2 | 功能描述:Pressure Sensor 4.35 PSI ~ 15.95 PSI (30 kPa ~ 110 kPa) Absolute 16 b 12-VFLGA 制造商:rohm semiconductor 系列:- 零件状态:在售 压力类型:绝对 工作压力:4.35 PSI ~ 15.95 PSI（30 kPa ~ 110 kPa） 输出类型:I2C 输出:16 b 精度:±1% 电压 - 电源:1.7 V ~ 3.6 V 端口尺寸:- 端口样式:无端口 特性:温度补偿 端子类型:SMD（SMT）接片 最高压力:290.07 PSI（2000 kPa） 工作温度:-40°C ~ 85°C 封装/外壳:12-VFLGA 供应商器件封装:CLGA12V025M 标准包装:1 |
| BM1386GLV-ZTR | 功能描述:PIEZO-RESISTIVE PRESSURE SENSOR, 制造商:rohm semiconductor 系列:- 零件状态:在售 压力类型:绝对 输出类型:I2C 输出:- 精度:±1% 电压 - 电源:1.7 V ~ 3.6 V 端口尺寸:- 端口样式:无端口 特性:温度补偿 端子类型:焊接垫 最高压力:290 PSI (2000 kPa) 工作温度:-40°C ~ 85°C 封装/外壳:10-VFLGA 供应商器件封装:CLGA10V020A 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。