- 您现在的位置：买卖IC网 > PDF目录223464 > BU-63925F0-190 (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70 PDF资料下载
参数资料
| 型号： | BU-63925F0-190 |
| 厂商： | DATA DEVICE CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70 |
| 封装： | CERAMIC, DFP-70 |
| 文件页数： | 7/48页 |
| 文件大小： | 405K |
| 代理商： | BU-63925F0-190 |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
15
Data Device Corporation
www.ddc-web.com
BU-63825
C-02/06-0
BC MESSAGE BLOCK FORMATS AND BC CONTROL
WORD
In BC mode, the BU-63825 supports all MIL-STD-1553 message
formats. For each 1553 message format, the BU-63825 man-
dates a specific sequence of words within the BC Message
Block. This includes locations for the Control, Command and
(transmitted) Data Words that are to be read from RAM by the
BC-to-RT Transfer
Control Word
Receive Command Word
Data Word #1
Data Word #2
.
Last Data Word
Last Data Word Looped Back
Status Received
Last Data Word
.
Data Word #2
Data Word #1
Status Received
Transmit Command Looped Back
Transmit Command Word
Control Word
RT-to-BC Transfer
Transmit Command
Looped Back
Rx RT Status Word
Last Data
.
Data #2
Data #1
Tx RT Status Word
Transmit Command
Receive Command
Control Word
RT-to-RT Transfer
Mode Command
Looped Back
Status Received
Mode Command
Control Word
Mode Code;
No Data
Mode Command
Looped Back
Data Word
Status Received
Tx Mode Command
Control Word
Tx Mode Code;
With Data
Tx Command
Looped Back
Last Data
.
Data #2
Data #1
Tx RT Status Word
Tx Command
Rx Broadcast Command
Control Word
RT-to-RTs (Broadcast)
Transfer
Last Data Status
Word
Last Data
.
Data #2
Data #1
Broadcast Command
Control Word
Broadcast
Data Word
Data Word Looped
Back
Status Received
Rx Mode Command
Control Word
Rx Mode Code;
With Data
Broadcast Mode Command
Looped Back
Broadcast Mode Command
Control Word
Broadcast Mode Code;
No Data
Data Word Looped Back
Data Word
Broadcast Mode Command
Control Word
Broadcast Mode Code;
With Data
FIGURE 4. BC MESSAGE BLOCK FORMATS
BC protocol logic. In addition, subsequent contiguous locations
must be allocated for storage of received Loopback, RT Status
and Data Words. FIGURE 4 illustrates the organization of the BC
message blocks for the various MIL-STD-1553 message for-
mats. Note that for all of the message formats, the BC Control
Word is located in the first location of the message block.
The BC Control Word is not transmitted on the 1553 bus.
Instead, it contains bits that select the active bus and message
format, enable off-line self-test, masking of Status Word bits,
enable retries and interrupts, and specify MIL-STD-1553A or -
1553B error handling. The bit mapping and definitions of the BC
Control Word are illustrated in TABLE 10.
The BC Control Word is followed by the Command Word to be
transmitted, and subsequently by a second Command Word (for
an RT-to-RT transfer), followed by Data Words to be transmitted
(for Receive commands). The location after the last word to be
transmitted is reserved for the Loopback Word. The loopback
Word is an on-line self-test feature. The subsequent locations
after the Loopback Word are reserved for received Status Words
and Data Words (for Transmit commands).
AUTOMATIC RETRIES
The BU-63825 BC implements automatic message retries. When
enabled, retries will occur, following response timeout or format
error conditions. As additional options, retries may be enabled
when the Message Error Status Word bit is set by a 1553A RT or
following a “Status Set” condition. For a failed message, either
one or two message retries will occur, and the bus channel
(same or alternate) is independently programmable for the first
and second retry attempts. Retries may be enabled or disabled
on an individual message basis.
BC INTERRUPTS
BC interrupts may be enabled by the Interrupt Mask Register for
Stack Rollover, Retry, End-of-Message (global), End-of-
Message (in conjunction with the BC Control Word for individual
messages), response timeout, message error, end of BC frame,
and Status Set conditions. The definition of “Status Set” is pro-
grammable on an individual message basis by means of the BC
Control Word. This allows for masking (“care/don’t care”) for the
individual RT Status Word bits.
REMOTE TERMINAL (RT) ARCHITECTURE
The RT protocol design of the BU-63825 represents DDC’s fifth
generation implementation of a 1553 RT. One of the salient fea-
tures of the Sp’ACE II’s RT architecture is its true multiprotocol
functionality. This includes programmable options for support of
MIL-STD-1553A, the various McAir protocols, and MIL-STD-
1553B Notice 2. The BU-63825 RT response time is 2 to 5 s
dead time (4 to 7 s per 1553B), providing compliance to all the
1553 protocols. Additional multiprotocol features of the BU-
相关PDF资料 |
PDF描述 |
|---|---|
| BU-63925G3-190 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
| BU-64703F8-300 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP80 |
| BU-64703B4-300 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CBGA80 |
| BU-64703B9-300 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CBGA80 |
| BU-65551M2-300 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, XMA68 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BU-63C-0 | 功能描述:测试电夹 Black Insul Alligato RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU-63C-2 | 功能描述:测试电夹 Red Insul Alligator RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU-63C-4 | 功能描述:测试电夹 Yellow Insul Alligat RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU-63C-5 | 功能描述:测试电夹 Green Insul Alligato RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU-63C-6 | 功能描述:测试电夹 Blue Insul Alligator RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
发布紧急采购，3分钟左右您将得到回复。