- 您现在的位置：买卖IC网 > PDF目录13392 > BU33TD3WG-TR (Rohm Semiconductor)IC REG LDO 3.3V .2A 5SSOP PDF资料下载
参数资料
| 型号： | BU33TD3WG-TR |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 11/13页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 3.3V .2A 5SSOP |
| 特色产品： | CMOS LDO Regulators |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 3.3V |
| 输入电压： | 最高 5.5V |
| 电压 - 压降（标准）： | 0.22V @ 200mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 200mA（最小值） |
| 电流 - 限制（最小）： | 220mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-TFSOP（0.063"，1.60mm 宽），5 引线 |
| 供应商设备封装： | 5-SSOP |
| 包装： | 标准包装 |
| 其它名称： | BU33TD3WG-DKR BU33TD3WG-DKR-ND BU33TD3WGDKR |
Datasheet
Notice
Precaution on using ROHM Products
intend to use our Products in devices requiring extremely high reliability (such as medical equipment
, transport
1.
Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
(Note 1)
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN USA EU CHINA
CLASS Ⅲ
CLASS Ⅳ
CLASS Ⅲ
CLASS Ⅱ b
CLASS Ⅲ
CLASS Ⅲ
2.
3.
4.
5.
6.
7.
8.
9.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl 2 ,
H 2 S, NH 3 , SO 2 , and NO 2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
The Products are not subject to radiation-proof design.
Please verify and confirm characteristics of the final or mounted products in using the Products.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
Confirm that operation temperature is within the specified range described in the product specification.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1.
2.
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the
ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice - GE
? 2014 ROHM Co., Ltd. All rights reserved.
Rev.002
相关PDF资料 |
PDF描述 |
|---|---|
| MAX16029TG+T | IC SUPERVISORY CIRC QUAD 24TQFN |
| MAX16000CTC+T | IC UP SUPERVISOR QUAD 12-TQFN |
| RCA49DRMD-S288 | CONN EDGECARD 98POS .125 EXTEND |
| GMM30DRST-S288 | CONN EDGECARD 60POS .156 EXTEND |
| BU29TD3WG-TR | IC REG LDO 2.9V .2A 5SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BU33UA3WNVX-TL | 制造商:ROHM 制造商全称:Rohm 功能描述:Versatile Package FULL CMOS LDO Regulator |
| BU33UC3WG-TR | 功能描述:IC REG LINEAR 300MA 5SSOP 制造商:rohm semiconductor 系列:* 包装:剪切带（CT） 零件状态:在售 稳压器数:1 电流 - 输出:300mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商器件封装:5-SSOP 标准包装:1 |
| BU33UV7NUX-E2 | 功能描述:SYNCHRONOUS BOOST DC/DC CONVERTE 制造商:rohm semiconductor 系列:* 包装:剪切带（CT） 零件状态:在售 安装类型:表面贴装 封装/外壳:10-UFDFN 裸露焊盘 供应商器件封装:VSON010X3020 标准包装:1 |
| BU33UV7NUX-EVK-101 | 功能描述:SYNCHRONOUS BOOST DC/DC CONVERTE 制造商:rohm semiconductor 系列:* 零件状态:在售 标准包装:1 |
| BU-34 | 功能描述:测试电夹 MICRO-GATOR CL STEEL RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
发布紧急采购，3分钟左右您将得到回复。