参数资料
型号: BXM80536GC2100F
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 2100 MHz, MICROPROCESSOR, CPGA478
封装: FLIP CHIP, PGA-478
文件页数: 4/84页
文件大小: 1488K
代理商: BXM80536GC2100F
12
Datasheet
Low Power Features
The system can generate a STPCLK# while the processor is in the AutoHALT Power-Down state.
When the system deasserts the STPCLK# interrupt, the processor will return execution to the
HALT state.
While in AutoHALT Power-Down state, the processor will process bus snoops and interrupts.
2.1.3
Stop-Grant State
When the STPCLK# pin is asserted, the Stop-Grant state of the processor is entered 20 bus clocks
after the response phase of the processor-issued Stop Grant Acknowledge special bus cycle.
Since the AGTL+ signal pins receive power from the FSB, these pins should not be driven
(allowing the level to return to V
CCP) for minimum power drawn by the termination resistors in this
state. In addition, all other input pins on the FSB should be driven to the inactive state.
RESET# will cause the processor to immediately initialize itself, but the processor will stay in
Stop-Grant state. A transition back to the Normal state will occur with the de-assertion of the
STPCLK# signal. When re-entering the Stop-Grant state from the Sleep state, STPCLK# should be
deasserted ten or more bus clocks after the de-assertion of SLP#.
A transition to the HALT/Grant Snoop state will occur when the processor detects a snoop on the
FSB (see Section 2.1.3). A transition to the Sleep state (see Section 2.1.5) will occur with the
assertion of the SLP# signal.
While in the Stop-Grant State, SMI#, INIT# and LINT[1:0] will be latched by the processor, and
only serviced when the processor returns to the Normal State. Only one occurrence of each event
will be recognized upon return to the Normal state.
While in Stop-Grant state, the processor will process snoops on the FSB and it will latch interrupts
delivered on the FSB.
The PBE# signal can be driven when the processor is in Stop-Grant state. PBE# will be asserted if
there is any pending interrupt latched within the processor. Pending interrupts that are blocked by
the EFLAGS.IF bit being clear will still cause assertion of PBE#. Assertion of PBE# indicates to
system logic that it should return the processor to the Normal state.
2.1.4
HALT/Grant Snoop State
The processor responds to snoop or interrupt transactions on the FSB while in Stop-Grant state or
in AutoHALT Power-Down state. During a snoop or interrupt transaction, the processor enters the
HALT/Grant Snoop state. The processor will stay in this state until the snoop on the FSB has been
serviced (whether by the processor or another agent on the FSB) or the interrupt has been latched.
After the snoop is serviced or the interrupt is latched, the processor will return to the Stop-Grant
state or AutoHALT Power-Down state, as appropriate.
相关PDF资料
PDF描述
BXM80536GC1800F 32-BIT, 1800 MHz, MICROPROCESSOR, CPGA478
BXM80536GC1600F 32-BIT, 1600 MHz, MICROPROCESSOR, CPGA478
BYP60K4 60 A, 400 V, SILICON, RECTIFIER DIODE
BYS10-45TR3 1.5 A, 45 V, SILICON, RECTIFIER DIODE
BYT51K 1 A, 800 V, SILICON, SIGNAL DIODE
相关代理商/技术参数
参数描述
BXM80536NC1400ES L7LS 制造商:Intel 功能描述:CELERON M,360,1.40GHZ,1M CACHE, 400MHZ FSB,1.26V,UFCPGA - Boxed Product (Development Kits)
BXMP1000 制造商:SPECTRUM 制造商全称:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1001 制造商:SPECTRUM 制造商全称:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1002 制造商:SPECTRUM 制造商全称:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1003 制造商:SPECTRUM 制造商全称:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER