参数资料
| 型号： | CDB35L00 |
| 厂商： | Cirrus Logic Inc |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | DEVELOPMENT BOARD FOR CS35L0X |
| 产品培训模块： | CS35L0x Audio Amplifiers Overview |
| 视频文件： | CS42L73 and CS35L00/01/03 |
| 标准包装： | 1 |
| 放大器类型： | D 类 |
| 输出类型： | 4-通道（四路） |
| 在某负载时最大输出功率 x 通道数量： | 2.7W x 4 @ 4 欧姆 |
| 电源电压： | 2.5 V ~ 5.5 V |
| 板类型： | 完全填充 |
| 已用 IC / 零件： | CS35L0X |
| 已供物品： | 板 |
| 产品目录页面： | 758 (CN2011-ZH PDF) |
| 其它名称： | 598-1803 |
CDB35L00-X4
2. GROUNDING AND POWER SUPPLY DECOUPLING
The CS35L00 requires careful attention to power supply and grounding arrangements to optimize performance and
minimize radiated emissions. The device decoupling capacitors should be located as close to the CS35L00 as pos-
sible. This can be optimized by using both top and bottom side component population as demonstrated by the
CDB35L00-X4 board.
2.1
2.2
2.2.1
Power Supply Decoupling
Proper power supply decoupling is one key to maximizing the performance of a Class-D amplifier. Figure 5
and Figure 6 on page 11 show the component placement for the CDB35L00-X4 board. Note the addition of
the C13, C23, C33, and C43 capacitors connected to the LFILT+ pin. This pin is used as decoupling for the
internal LDO regulator when operating in HD or FHD modes.
The small value decoupling capacitors are placed as close as possible to the power pins of the CS35L00
on the CDB35L00-X4 board. It is recommended that the power supply decoupling capacitors reside on the
opposite side of the board from which the CS35L00 is populated on. This allows for very close placement
of the decoupling capacitors to the power supply pins of the CS35L00 without interfering with the differential
audio inputs or differential audio outputs. This placement keeps the high-frequency current loop small to
minimize EMI.
Electromagnetic Interference (EMI)
This reference design is a board-level solution that is meant to control emissions by minimizing and sup-
pressing them at the source, in contrast to containing them in an enclosure.
Suppression of EMI at the Source
Several techniques are used in the circuit design and board layout to minimize high-frequency fields in
the immediate vicinity of the high-power components. Specific techniques include the following:
? As mentioned in Section 2.1 , effective power supply decoupling of high-frequency currents and mini-
mizing the loop area of the decoupling loop is one aspect of minimizing EMI.
? Differential input and output signals should be routed differentially whenever possible.
? A solid ground plane on the adjacent PCB layer underneath all high-frequency traces to minimize the
loop area of the return path.
? Optional output EMI filter component landings are available as described in Section 1.7.1 , if emissions
need to be further reduced.
? Keeping the switching output filter components as close to the amplifier as possible.
DS913DB2
7
相关PDF资料 |
PDF描述 |
|---|---|
| CDB4207 | BOARD EVALUATION FOR CS4207 |
| CDB4245 | BOARD EVAL FOR CS4245 CODEC |
| CDB42L55 | BOARD EVAL FOR CS42L55 CODEC |
| CDB44L11 | EVALUATION BOARD FOR CS44L11 |
| CDB48500-USB | KIT USB EVALUATION FOR CDB48500 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CDB35L00-X4 | 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:2.7 W x 4 CS35L00 Amplifier Demonstration Board |
| CDB36-A | 制造商:Panduit Corp 功能描述: |
| CDB37MM25 | 制造商:DigitHead Inc 功能描述:COMPUTERS |
| CDB-37PF | 制造商:HRS 制造商全称:HRS 功能描述:CD CRIMP TYPE CONNECTOR |
| CDB-37SF | 制造商:HRS 制造商全称:HRS 功能描述:CD CRIMP TYPE CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。