- 您现在的位置：买卖IC网 > PDF目录378446 > CH7013A-T (Electronic Theatre Controls, Inc.) Digital PC to TV Encoder PDF资料下载
参数资料
| 型号： | CH7013A-T |
| 厂商： | Electronic Theatre Controls, Inc. |
| 英文描述： | Digital PC to TV Encoder |
| 中文描述： | 数码电脑电视编码器 |
| 文件页数： | 13/46页 |
| 文件大小： | 249K |
| 代理商： | CH7013A-T |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页
Chrontel
CH7013A
201-0000-041 Rev. 1.0, 6/14/2000
*Patent number 5,874,846
13
Functional Description
The CH7013A is a TV-output companion chip to graphics controllers providing digital output in either YUV or
RGB format. This solution involves both hardware and software elements which work together to produce an
optimum TV screen image based on the original computer generated pixel data. All essential circuitry for this
conversion are integrated on-chip. On-chip circuitry includes memory, memory control, scaling, PLL, DAC, filters,
and NTSC/PAL encoder. All internal signal processing, including NTSC/PAL encoding, is performed using digital
techniques to ensure that the high-quality video signals are not affected by drift issues associated with analog
components. No additional adjustment is required during manufacturing.
CH7013A is ideal for PC motherboards, web browsers, or VGA add-in boards where a minimum of discrete support
components (passive components, parallel resonance 14.31818 MHz crystal) are required for full operation.
Architectural Overview
The CH7013A is a complete TV output subsystem which uses both hardware and software elements to produce an
image on TV which is virtually identical to the image that would be displayed on a monitor. Simply creating a
compatible TV output from a VGA input involves a relatively straightforward process. This process includes a
standard conversion from RGB to YUV color space, converting from a non-interlaced to an interlaced frame
sequence, and encoding the pixel stream into NTSC or PAL compliant format. However, creating an optimum
computer-generated image on a TV screen involves a highly sophisticated process of scaling, deflickering, and
filtering. This results in a compatible TV output that displays a sharp and subtle image, of the right size, with
minimal artifacts from the conversion process.
As a key part of the overall system solution, the CH7013A software establishes the correct framework for the VGA
input signal to enable this process. Once the display is set to a supported resolution (either 640x480 or 800x600), the
CH7013A software may be invoked to establish the appropriate TV output display. The software then programs the
various timing parameters of the VGA controller to create an output signal that will be compatible with the chosen
resolution, operating mode, and TV format. Adjustments performed in software include pixel clock rates, total
pixels per line, and total lines per frame. By performing these adjustments in software, the CH7013A can render a
superior TV image without the added cost of a full frame buffer memory – normally used to implement features
such as scaling and full synchronization.
The CH7013A hardware accepts digital RGB or YCrCb inputs, which are latched in synchronization with the pixel
clock. These inputs are then color-space converted into YUV in 4-2-2 format and stored in a line buffer memory.
The stored pixels are fed into a block where scan-rate conversion, underscan scaling and 2-line, 3-line, 4-line and 5-
line vertical flicker filtering are performed. The scan-rate converter transforms the VGA horizontal scan-rate to
either NTSC or PAL scan rates; the vertical flicker filter eliminates flicker at the output while the underscan scaling
reduces the size of the displayed image to fit onto a TV screen. The resulting YUV signals are filtered through
digital filters to minimize aliasing problems. The digital encoder receives the filtered signals and transforms them to
composite and S-Video outputs, which are converted by the three 9-bit DACs into analog outputs.
Color Burst Generation*
The CH7013A allows the sub-carrier frequency to be accurately generated from a 14.31818 MHz crystal oscillator,
leaving the sub-carrier frequency independent of the sampling rate. As a result, the CH7013A may be used with any
VGA chip (with an appropriate digital interface) since the CH7013A sub-carrier frequency can be generated without
being dependent on the precise pixel rates of VGA controllers. This feature is a significant benefit, since even a
±
0.01% sub-carrier frequency variation may be enough to cause some television monitors to lose color lock.
In addition, the CH7013A has the capability to genlock the color burst signal to the VGA horizontal sync frequency,
which enables a fully synchronous system between the graphics controller and the television. When genlocked, the
CH7013A can also stop “dot crawl” motion (for composite mode operation in NTSC modes) to eliminate the
annoyance of moving borders. Both of these features are under programmable control through the register set.
Display Modes
The CH7013A display mode is controlled by three independent factors: input resolution, TV format, and scale
factor, which are programmed via the display mode register. It is designed to accept input resolutions of 640x480,
800x600, 640x400 (including 320x200 scan-doubled output), 720x400, and 512x384. It is designed to support
相关PDF资料 |
PDF描述 |
|---|---|
| CH7013A-V | Digital PC to TV Encoder |
| CHB1143 | CHB1143 |
| CHF12545CBF | 500 W Power RF Flanged Chip Termination |
| CHF12545CBF500L | 500 W Power RF Flanged Chip Termination |
| CHF12545CBF500R | 500 W Power RF Flanged Chip Termination |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CH7013A-V | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Digital PC to TV Encoder |
| CH7013B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Digital PC to TV Encoder |
| CH7013B-D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Digital PC to TV Encoder |
| CH7013B-DF | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Digital PC to TV Encoder |
| CH7013B-DF-TR | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Digital PC to TV Encoder |
发布紧急采购，3分钟左右您将得到回复。