- 您现在的位置：买卖IC网 > PDF目录125560 > CM2320-7EPD0 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | CM2320-7EPD0 |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE M02, MODULE |
| 文件页数： | 10/25页 |
| 文件大小： | 569K |
| 代理商： | CM2320-7EPD0 |
Cassette Style
DC-DC Converters
M Series
Edition 01/01.2001
18/25
Isolation
The electric strength test is performed as a factory test in
accordance with IEC/EN 60950 and UL 1950 and should
not be repeated in the field. Power-One will not honour any
Table 15: Isolation
Characteristic
Input to
Output to Output to Output to
Unit
case
output
case
output
class I
class II
class I
class II
option H
Electric
Required according to
1.5
3.0
3.0 1
3.0
0.5
-
kVrms
strength
IEC/EN 60950
2.1
4.2
4.2 1
4.2
0.7
-
kV DC
test voltage
Actual factory test 1 s
2.8
5.6
5.6 1
5.6
1.4
2.8
0.3
AC test voltage equivalent
2.0
4.0
4.0 1
4.0
1.0
2.0
0.2
kVrms
to actual factory test
Insulation resistance at 500 V DC
>300
>100 2
M
1 In accordance with IEC/EN 60950 only subassemblies are tested in factory with this voltage.
2 Tested at 300 V DC.
For creepage distances and clearances refer to:
Technical Information: Safety.
Safety of Operator Accessible Output Circuit
If the output circuit of a DC-DC converter is operator acces-
sible, it shall be an SELV circuit according to the IEC/EN
60950 related safety standards.
Since the M series DC-DC converters provide double or re-
inforced insulation between input and output, based on a
rated primary input voltage of 250 V AC and 400 V DC (for
class II units 250 V AC and DC), only operational insulation
is needed between the AC mains and the input of the DC-
DC converter. This means that there is no need for an elec-
trical isolation between the AC mains circuit and the DC-DC
converter input circuit to cause the output of an M series
DC-DC converter to be an SELV circuit. Only voltage
adaption and rectification to the specified input voltage
range of the DC-DC converter is needed.
The following table shows a possible installation configura-
tion, compliance with which causes the output circuit of the
DC-DC converter to be an SELV circuit according to IEC/
EN 60950 up to a configured output voltage (sum of nomi-
nal voltages if in series or +/– configuration) of 36 V.
However, it is the sole responsibility of the installer to as-
sure the compliance with the relevant and applicable safety
regulations. More information is given in:
Technical Infor-
mation: Safety.
Table 16: Safety concept leading to an SELV output circuit
Conditions
Front end
DC-DC converter
Result
Nominal
Minimum required grade
Maximum rated
Minimum required
Equip-
Measures to achieve the
Safety status
supply
of insulation, to be pro-
DC output voltage
safety status of the
ment
specified safety status of
of the DC-DC
voltage
vided by the AC-DC front
from the front end
front end output
the output circuit
converter
end, including mains
circuit
output circuit
supplied battery charger
Mains
Operational (i.e. there is
≤400 V 1 (The
Primary circuit
Class I
Double or reinforced
SELV circuit
≤250 V AC no need for electrical
rated voltage
(A...LM) insulation, based on
isolation between the
between any input
250 V AC and 400 V DC
mains supply voltage and
pin and earth can
(provided by the DC-DC
theDC-DC converter
be up to 250 V AC
converter) and earthed
input voltage)
or 400 V DC)
case 2
≤250 V 1 (The
Class II
Double or reinforced
rated voltage
(CMZ,
insulation, based on
between any input
DMZ,
250 V AC or DC (provided
pin and earth can
LMZ)
by the DC-DC converter)
be up to 250 V AC
or DC)
1 The front end output voltage should match the specified operating input voltage range of the DC-DC converter.
2 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
guarantee/warranty claims resulting from electric strength
field tests.
相关PDF资料 |
PDF描述 |
|---|---|
| CM2320-7EPD5HF | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| CM2320-7PA | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| CM2320-7PV3 | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| CM2320-9PA | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| CM2320-9PD7AHF | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CM2320-7ET2 | 功能描述:DC/DC CONVERTER DUAL 12V 2A 制造商:bel power solutions 系列:Melcher M 包装:散装 零件状态:有效 类型:隔离 电压 - 输入:28 ~ 140 V 输出:12V 输出数:2 不同电流时的输出（最大值） - 1:12 VDC @ 2A 不同电流时的输出（最大值） - 2:12 VDC @ 2A 不同电流时的输出（最大值） - 3:- 不同电流时的输出（最大值） - 4:- 功率（W）:48W 应用:ITE（商业），铁路 安装类型:底座安装 工作温度:-25°C ~ 71°C 效率:79% 封装/外壳:- 大小/尺寸:6.63" 长 x 4.38" 宽 x 1.52" 高（168.5mm x 111.2mm x 38.7mm） 功率（W） - 最大值:48W 认可:cCSAus，CE 标准包装:5 |
| CM2320-9 | 制造商:Power-One 功能描述:DC/DC PS DUAL-OUT 12V 2A 50W 11PIN - Bulk |
| CM2321-000 | 制造商:TE Connectivity 功能描述:55/LF0114-28-94CS3254 |
| CM2322-000 | 制造商:TE Connectivity 功能描述:55/LF0114-28-95CS3254 |
| CM2323 | 制造商:CML 制造商全称:Chicago Miniature Lamp,inc 功能描述:T-1 3/4 Bi-Pin Base (.125) |
发布紧急采购，3分钟左右您将得到回复。