参数资料
型号: CMX644AD2
厂商: CML MICROSYSTEMS PLC
元件分类: 调制器/解调器
英文描述: 1.2 kbps DATA, MODEM, PDSO24
封装: SOIC-24
文件页数: 20/34页
文件大小: 1174K
代理商: CMX644AD2
RPM-Based Fan Controller with HW Thermal Shutdown
Datasheet
SMSC EMC2103
27
Revision 0.90 (08-19-08)
DATASHEET
5.2
Fan Control Modes of Operation
The EMC2103 has four modes of operation for the fan driver. Each mode uses Ramp Rate control and
the Spin Up Routine
1. PWM Setting Mode - in this mode of operation, the user directly controls the PWM duty cycle
setting. Updating the Fan Driver Setting Register (see Section 6.20) will instantly update the fan
drive.
This is the default mode. The PWM Setting Mode is enabled by clearing both the EN_ALGO
bit in the Fan Configuration Register (see Section 6.22) and the LUT_LOCK bit in the Look
Up Table Configuration Register (see Section 6.32).
Whenever the PWM Setting Mode is enabled the current drive will be changed to what was
last written into the Fan Driver Setting Register.
2. Fan Speed Control Mode (FSC) - in this mode of operation, the user determines a fan speed and
the drive setting is automatically updated to achieve this target speed.
This mode is enabled by clearing the LUT_LOCK bit in the Look Up Table (LUT)
Configuration Register and setting the EN_ALGO bit in the Fan Configuration Register.
3. Using the Look Up Table with Fan Drive Settings (PWM Setting w/ LUT Mode) - In this mode of
operation, the user programs the Look Up Table with PWM duty cycle settings and corresponding
temperature thresholds. The fan drive is set based on the measured temperatures and the
corresponding drive settings.
This mode is enabled by programming the Look Up Table then setting the LUT_LOCK bit
while the RPM / PWM bit is set to a ‘1’ (see Section 6.32)
4. Using the Look Up Table with Fan Speed Control algorithm (FSC w/ LUT Mode)- In this mode of
operation, the user programs the Look Up Table with fan speed target values and corresponding
temperature thresholds. The TACH Target Register will be set based on the measured
temperatures and the corresponding target settings. The PWM drive settings will be determined
automatically based on the RPM based Fan Speed Control Algorithm
This mode is enabled by programming the Look Up Table then setting the LUT_LOCK bit
while the RPM / PWM bit is set to ‘0’ (see Section 6.32).
94
1020
126
29400
95
1100
127
49900
96
1150
65
Open
Table 5.3 Fan Controls Active for Operating Mode
DIRECT PWM
SETTING MODE
FSC MODE
DIRECT PWM SETTING W/
LUT MODE
FSC W/ LUT MODE
Fan Driver Setting (read
/ write)
Fan Driver Setting (read
only)
Fan Driver Setting (read only)
Fan Driver Setting (read
only)
EDGES[1:0]
(Fan Configuration)
EDGES[1:0]
-
RANGE[1:0]
(Fan Configuration)
-
RANGE[1:0]
(Fan Configuration)
UPDATE[2:0]
(Fan Configuration)
UPDATE[2:0]
(Fan Configuration)
UPDATE[2:0]
(Fan Configuration)
UPDATE[2:0]
(Fan Configuration)
Table 5.2 TRIP_SET Resistor Setting (continued)
TTRIP (°C)
RSET (1%)
TTRIP (°C)
RSET (1%)
相关PDF资料
PDF描述
CMX644AD5 1.2 kbps DATA, MODEM, PDSO24
CMY211E6327 500 MHz - 2500 MHz RF/MICROWAVE DOUBLE BALANCED MIXER
CMZ5914BPTR13 3.6 V, 0.55 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
CMZ5950BP 110 V, 0.55 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE
CN201J1AS215DQ7 Double Pole Power Rocker Switches
相关代理商/技术参数
参数描述
CMX644AD5 制造商:CML Innovative Technologies 功能描述:V22 AND Bell 212A Modem with DTMF, Tube
CMX649 制造商:CMLMICRO 制造商全称:CML Microcircuits 功能描述:ADM Codec
CMX649E3 制造商:CML Innovative Technologies 功能描述:Adaptive Delta Modulation (ADM) Voice Codec, Tube
CMX654 制造商:CMLMICRO 制造商全称:CML Microcircuits 功能描述:V23 Transmit Modulator
CMX661 制造商:CMLMICRO 制造商全称:CML Microcircuits 功能描述:The Product Data Amendment series of documents