- 您现在的位置：买卖IC网 > PDF目录20631 > CPD250-4530 (Power-One)PWR SUP 250W 3.3/5/12/-12V QUAD PDF资料下载
参数资料
| 型号： | CPD250-4530 |
| 厂商： | Power-One |
| 文件页数： | 3/19页 |
| 文件大小： | 0K |
| 描述： | PWR SUP 250W 3.3/5/12/-12V QUAD |
| 标准包装： | 10 |
| 系列： | CPD |
| 类型： | 隔离 |
| 输入电压： | 36 ~ 75V |
| 输出： | 5V，3.3V，±12V |
| 输出数： | 4 |
| 输出 - 1 @ 电流（最大）： | 5 VDC @ 40A |
| 输出 - 2 @ 电流（最大）： | 3.3 VDC @ 40A |
| 输出 - 3 @ 电流（最大）： | 12 VDC @ 5.5A |
| 输出 - 4 @ 电流（最大）： | -12 VDC @ 2A |
| 功率（瓦特）： | 250W |
| 安装类型： | Compact PCI® |
| 效率： | 82.2% |
| 封装/外壳： | 模块 |
| 尺寸/尺寸： | 6.40" L x 1.60" W x 5.07" H（162.5mm x 40.6mm x 128.7mm） |
| 包装： | 散装 |
| 电源（瓦特）- 最大： | 250W |
| 批准： | CE，CSA，cUL，EN，TUV，UL |
| 其它名称： | 179-2264 |
CPA, CPD Series Data Sheet
?
200 – 550 Watt
CompactPCI ?
AC-DC and DC-DC Converters
Product Marking
Label with specific type designation, applicable safety
approvals and recognition marks, CE mark, warnings,
Power-One patents, company logo, input voltage range,
Functional Description
The inputs of all converters are protected against surges and
transients occurring on the source lines. A highly efficient
input filter and an active inrush current limiter ensure a very
low inrush current of short duration. This prevents circuit
breakers and fuses from tripping at switch-on.
All CPA models have an additional bridge rectifier and a boost
converter to provide active power factor correction (PFC)
according to EN 61000-3-2.
The CPx200/250 models (see fig.1a) are equipped with two
independent high efficient 2-switch forward converters,
switching 180° out of phase to minimize the ripple current at
the input.
On the secondary side, two high-current synchronous
rectifiers supply Vo1 (5 V) and Vo2 (3.3 V) with up to 40 A. The
secondary-controlled Vo3 (+12 V) post regulator is supplied
by an additional winding of the 3.3 V main transformer. The
linear regulator for Vo4 (–12 V) is supplied from the output
choke of the Vo3 output. The output filters reduce ripple and
noise to a minimum without compromising the dynamic
response.
nominal output voltages and output currents, degree of
protection, batch no., serial no., and data code including
production site, modification status, and date of production.
Identification of LEDs on the front panel.
The models CPD500 (fig. 1b) and CPA500/550 (fig. 1c) exhibit
a third forward converter for both outputs Vo3 and Vo4. The
outputs Vo1 an Vo2 provide up to 50 and 60 A.
All outputs are fully regulated and protected from the bus by
decoupling FETs or diodes. A current monitor calculates the
output power. As soon as the output power exceeds the
maximum threshold level, the converter starts to reduce the
output power by decreasing the output voltages.
In contrast to the outputs Vo1 (5 V), Vo2 (3.3 V), and Vo3
(+12 V) with active current sharing, output Vo4 ( – 12 V) has a
droop characteristic for passive current sharing.
If for some reason the voltage of any output exceeds the
nominal value significantly, the converter is permanently shut
down. If option L is fitted, this occurs as well, if the max. output
current is exceeded for a predefined time. To reset, the input
voltage must be removed for a short time.
Power-One's Efficient Dual Geometric Edge Technology
(EDGE TM ) facilitates high current density, increases reliability
by reducing component stresses, and decreases the amount
of heat dissipated. The backbone of this patented technology
is an interleaved, multi-channel forward converter utilising a
1 Only
CPA models have a bridge
03110f
rectifier and a boost converter
ACN
+DCIN
46
ACL
–DCIN
C Y
+
Forward
converter
≈ 135 kHz
+
C Y
ORing
FET
V o1
+
47
Inrush
current
C b
45
C Y
limiter
Forward
converter
≈ 135 kHz
+
ORing
FET
V o2
+
C Y
RTN
(22)
INH#
39
EN#
27
Inhibit
logic
+
C Y
ORing
FET
V o3
+
Fig. 1a
Block diagram of CPA/CPD200 and CPA/CPD250
Linear
regulator
C y
ORing
diode
V o4
–
+
models. For the pin allocation, see Mechanical Data.
BCD20005-G Rev. AG2, 20-Dec-2012
Page 3 of 19
www.power-one.com
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3700EMS#PBF | IC REG DL BUCK/LINEAR 10MSOP |
| RCM06DTBI-S189 | CONN EDGECARD 12POS R/A .156 SLD |
| EBM08DSAN | CONN EDGECARD 16POS R/A .156 SLD |
| RW2-2412D/H3/SMD | CONV DC/DC 2W 18-36VIN +/-12VOUT |
| AMM25DSEN-S13 | CONN EDGECARD 50POS .156 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CPD250-4530AG | 功能描述:PWR SUP 250W 3.3/5/12/-12V QUAD 制造商:bel power solutions 系列:* 零件状态:有效 标准包装:20 |
| CPD250-4530CG | 功能描述:DC/DC CONVERTER 制造商:bel power solutions 系列:Melcher CPD 包装:散装 零件状态:有效 类型:隔离 电压 - 输入:36 ~ 75 V 输出:5V，3.3V，12V，-12V 输出数:4 不同电流时的输出（最大值） - 1:5 VDC @ 40A 不同电流时的输出（最大值） - 2:3.3 VDC @ 40A 不同电流时的输出（最大值） - 3:12 VDC @ 5.5A 不同电流时的输出（最大值） - 4:-12 VDC @ 2A 功率（W）:250W 应用:ITE（商业） 安装类型:Compact PCI? 工作温度:-25°C ~ 50°C 效率:82.2% 封装/外壳:- 大小/尺寸:6.67" 长 x 3.94" 宽 x 1.60" 高（169.5mm x 100.0mm x 40.6mm） 功率（W） - 最大值:250W 认可:cCSAus，CE，TUV 标准包装:20 |
| CPD250-4530G | 功能描述:DC/DC转换器 36-75Vin 250W 5V25A 3.3V20A /12V4A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| CPD250-4530-G | 制造商:Power-One 功能描述: |
| CPD250-4530GREP | 制造商:Power-One 功能描述: |
发布紧急采购，3分钟左右您将得到回复。