- 您现在的位置：买卖IC网 > PDF目录10965 > CS4955-CQZ (Cirrus Logic Inc)IC VID ENCODER NTSC/PAL 48-TQFP PDF资料下载
参数资料
| 型号： | CS4955-CQZ |
| 厂商： | Cirrus Logic Inc |
| 文件页数： | 4/60页 |
| 文件大小： | 0K |
| 描述： | IC VID ENCODER NTSC/PAL 48-TQFP |
| 标准包装： | 250 |
| 类型： | 视频编码器 |
| 电压 - 电源，模拟： | 3.15 V ~ 5.25 V |
| 电压 - 电源，数字： | 3.15 V ~ 5.25 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-TQFP（7x7） |
| 包装： | 管件 |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页
CS4954 CS4955
12
DS278F6
The CS4954/5 is designed to function as a video
timing master or video timing slave. In both Master
and Slave Modes, all timing is sampled and assert-
ed with the rising edge of the CLK pin.
In most cases, the CS4954/5 will serve as the video
timing master. HSYNC, VSYNC, and FIELD(1)
are configured as outputs in Master Mode. HSYNC
or FIELD can also be defined as a composite blank-
ing output signal in Master Mode. In Master Mode,
the timing of HSYNC, VSYNC, FIELD and Com-
posite Blank (CB) signals is programmable. Exact
horizontal and vertical display timing is addressed
in the Operational Description section.
In Slave Mode, HSYNC and VSYNC are typically
configured as input pins and are used to initialize
independent vertical and horizontal timing genera-
tors upon their respective falling edges. HSYNC
and VSYNC timing must conform to the ITU-
R BT.601 specifications.
The CS4954/5 also provides a ITU R.BT656 Slave
Mode in which the video input stream contains
EAV and SAV codes. In this case, proper HSYNC
and VSYNC timing is extracted automatically
without any inputs other than the V [7:0]. ITU
R.BT656 input data that is sampled with the lead-
ing edge of CLK.
In addition, it is also possible to output HSYNC
and VSYNC signals when in ITU R.BT656 Slave
Mode.
4.2
Video Input Formatter
The Video Input Formatter translates YCbCr input
data into YUV information, when necessary, and
splits the luma and chroma information for filter-
ing, scaling, and modulation.
4.3
Color Subcarrier Synthesizer
The subcarrier synthesizer is a digital frequency
synthesizer that produces the appropriate subcarri-
er frequency for NTSC or PAL. The CS4954/5
generates the color burst frequency based on the
CLK input (27 MHz). Color burst accuracy and
stability are limited by the accuracy of the 27 MHz
input. If the frequency varies, then the color burst
frequency will also vary accordingly.
For environments in which the CLK input varies or
jitters unacceptably, a local crystal frequency refer-
ence can be used on the XTAL_IN and
XTAL_OUT pins. In this instance, the input CLK is
continuously compared with the external crystal ref-
erence input and the internal timing of the CS4954/5
is automatically adjusted so that the color burst fre-
quency remains within tolerance.
Controls are provided for phase adjustment of the
burst to permit color adjustment and phase com-
pensation. Chroma hue control is provided by the
CS4954/5 via a 10-bit Hue Control Register
(HUE_LSB and H_MSB). Burst amplitude control
is also made available to the host via the 8-bit burst
amplitude register (SC_AMP).
4.4
Chroma Path
The Video Input Formatter delivers 4:2:2 YUV
outputs to separate chroma and luma data paths.
The chroma output of the Video Input Formatter is
directed to a chroma low-pass 19-tap FIR filter.
The filter bandwidth is selected (or the filter can be
bypassed) via the CONTROL_1 Register. The
passband of the filter is either 650 kHz or 1.3 MHz
and the passband ripple is less than or equal to
0.05 dB. The stopband for the 1.3 MHz selection
begins at 3 MHz with an attenuation of greater than
35 dB. The stopband for the 650 kHz selection be-
gins around 1.1 MHz with an attenuation of greater
than 20 dB.
The output of the chroma low-pass filter is connect-
ed to the chroma interpolation filter in which up-
sampling from 4:2:2 to 4:4:4 is accomplished.
Following the interpolation filter, the U and V
chroma signals pass through two independent vari-
NOTE 1. The FIELD pin (pin 9) remains an output pin in SLAVE mode. However, the FIELD pin state does not
toggle in SLAVE mode and its output state should be considered random.
相关PDF资料 |
PDF描述 |
|---|---|
| MC68908GR16MFJE | IC MCU 8BIT 16K FLASH 32-LQFP |
| MCF51QE128CLH | IC MCU 32BIT 128K FLASH 64-LQFP |
| MC908KX8VDWE | IC MCU 8K FLASH 4/8MHZ 16-SOICW |
| LF13WBP-11P | CONN PLUG WATERPROOF 11POS MALE |
| MC908LJ12CPBER | IC MCU 12K FLASH 4/8MHZ 64-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CS4955-CQZR | 功能描述:视频 IC IC NTSC/PAL Digital Video Encoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| CS496102 | 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:New Audio System Processors are Ideal for Digital Audio Networking Applications |
| CS496102-CQZ | 功能描述:音频 DSP 2x2 CobraNet Audio Network Processor RoHS:否 制造商:Texas Instruments 工作电源电压: 电源电流: 工作温度范围: 安装风格: 封装 / 箱体: 封装:Tube |
| CS496102-CQZ/A1 | 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Digital Audio Networking Processor |
| CS496102-CQZR | 功能描述:音频 DSP IC CobraNet Trns/AdNtwrkng Prcsr RoHS:否 制造商:Texas Instruments 工作电源电压: 电源电流: 工作温度范围: 安装风格: 封装 / 箱体: 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。