参数资料
型号: CS5462-ISZR
厂商: Cirrus Logic Inc
文件页数: 12/16页
文件大小: 0K
描述: IC ENERGY METERING 1PHASE 24SSOP
标准包装: 1,000
输入阻抗: 30 千欧
测量误差: 0.1%
电压 - 高输入/输出: 0.8V
电压 - 低输入/输出: 0.2V
电流 - 电源: 2.9mA
电源电压: 4.75 V ~ 5.25 V
测量仪表类型: 单相
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 24-SSOP(0.209",5.30mm 宽)
供应商设备封装: 24-SSOP
包装: 带卷 (TR)
CS5462
which time the CS5462 will configure itself and re-
sume normal operation.
Supply
Voltage
5V
4V
2.5 V
4.7 User Defined Settings
EXAMPLE: Design a hybrid stepper motor meter
with an 2 Hz maximum pulse output frequency on
the E1, E2 pins with 500 mV P-P signal on the in-
puts of the current and voltage channels and the
high pass filter enabled on the current channel on-
ly. Using the figure below these settings can be se-
lected with two connections.
1V
0V
Reset
Normal
Operation
Reset
P1
CAL1
+4.2%
CAL0
+0.6%
FREQ
0.25 Hz (stp)
10x
IGAIN
500mV
no hpf
Figure 7. Power-on Reset
Time
P2
P3
P4
+2.8%
+1.4
0
+0.4%
+0.2%
0
0.5 Hz (stp)
1 Hz (stp)
2 Hz (stp)
50x
10x
50x
100mV
500mV
100mV
no hpf
hpf both
hpf both
4.6
Oscillator Characteristics
P5
-1.4%
-0.2%
4 Hz (stp)
10x
500mV
hpf Ich
XIN and XOUT are the input and output of an in-
verting amplifier which can provide oscillation and
P6
P7
-2.8%
-4.2%
-0.4%
-0.6%
4 Hz (mc)
16 Hz (mc)
50x
10x
100mV
500mV
hpf Ich
hpf Vch
can be configured as an on-chip oscillator, as
shown in Figure 8. The oscillator circuit is designed
to work with a quartz crystal or a ceramic resona-
tor. To reduce circuit cost, two load capacitors C1
and C2 are integrated in the device, one between
XIN and DGND, one between XOUT and DGND.
Lead lengths should be minimized to reduce stray
capacitance. To drive the device from an external
clock source, XOUT should be left unconnected
while XIN is driven by the external circuitry. There
is an amplifier between XIN and the digital section
which provides CMOS level signals. This amplifier
works with sinusoidal inputs so there are no prob-
lems with slow edge times.
XOUT
Figure 9. Calibration, Frequency Select, and
PGA Select
By directly connecting FREQ with P4 and IGAIN
with P5 the CS5462 is configured to drive a step-
per motor with a maximum pulse output rate of
2 Hz, to support an input range of 500 mV P-P , and
to remove all DC content on the current signals by
enabling the HPFs on the Ich. The CS5462 is now
ready for calibration.
Before applying power to the chip, connect the
CAL0 and CAL1 pins to P4. This will select
0% + 0% = 0% gain adjustment. After making this
connection the CS5462 is ready to be calibrated.
Once power is applied the CS5462 will begin a
startup sequence in which it will scan the FREQ,
IGAIN, CAL0, and CAL1 pins. After determining
which connections are made the FREQ, IGAIN,
XIN
DGND
C1
C2
Oscillator
Circuit
C1 = C2 = 22 pF
CAL0, and CAL1 pins will become high impedance
inputs and the part will begin normal operation and
start converting. If on-chip calibration is required
place known voltages across the inputs on IIN±
and VIN±.
For example, 150 mV RMS = ~424.26 mV P-P will be
used for both the current and voltage inputs.
424.26 mV P-P is ~84.853% of the maximum full
scale input of both the current and voltage chan-
nels. With this input on both channels the expected
12
Figure 8. Oscillator Connection
pulse output frequency is
84.853% * 84.853% = 72% of full scale. This
DS547F1
相关PDF资料
PDF描述
EB73S-SA1060W-K CONN EDGEBOARD SINGLE 10POS 5A
EB71S-SA1060X CONN EDGEBOARD SINGLE 10POS 3A
LT3500HMSE#PBF IC REG DL BUCK/LINEAR 16-MSOP
591D477X96W3R2T20H CAP TANT 470UF 6.3V 10% 2824
LT3694IUFD-1#PBF IC REG TRPL BUCK/LINEAR 28QFN
相关代理商/技术参数
参数描述
CS5463 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Single Phase, Bi-directional Power/Energy IC
CS5463_08 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Single Phase, Bi-directional Power/Energy IC
CS5463_11 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:Single Phase, Bi-directional Power/Energy IC
CS5463-IS 功能描述:电流和电力监控器、调节器 Single Phase Power/Energy IC RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
CS5463-ISZ 功能描述:电流和电力监控器、调节器 Single Phase Power/Energy IC RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel